yourgoodimbetter;4099289 Wrote:
Quote:
> This worked for me
>
> System: I'm currently running Vista Home Premium 32 bit with a HP
> a6130n desktop computer.
> Issue: WPD FileSystem Volume driver software. Properties status shows
> "This device cannot start. (Code 10)"
> symptoms: install WPD FileSystem Volume driver software after every
> login
>
> The issue is the same although i noticed one of the card readers were
> missing under computer folder. Instructions are as follows:
>
> 1. Right click computer under the start tab and select manage
> 2. Click on the Device manager tab. You will see the ! in "WPD
> FileSystem Volume driver software."
> 3. Click on Disk drives and disable each one until the WPD FileSystem
> disappears.
> 4. Reinable all the drives then right click the problem drive and
> select properties.
> 5. Click on the volumes tab then select "populate" then note down what
> Disk number the populate assigned it.
> 6. Go back to the Computer Management window. On the left side is a
> folder called Disk Management(under the Storage folder). Select Disk
> Management.
> 7. At the bottom is a list of disks. Right click the disk number you
> populated for the problem drive and select "Change drive letter and
> paths.."
> 8. Assign the drive letter and go back to the Device Manager.
> 9. problem gone.
I tried this but a letter was already assigned to DISK2 (H
the disk
it populated. I tried reassigning it to J: from H: but I still have the
yellow "!", Didn't help. :-/
--
mikenowo
------------------------------------------------------------------------
mikenowo's Profile:
http://forums.techarena.in/members/107204.htm
View this thread:
http://forums.techarena.in/vista-help/882321.htm http://forums.techarena.in