View Single Post
Old 12-24-2006   #4 (permalink)
David Hettel
Guest


 
 

Re: Connecting the Wii through Vista

Yes when you enable sharing you'll get warning messages, and it will set the
other network adapter to 192.168.0.1 and a mask of 255.255.255.0, note that
if you look at the network properties for the adapter that it will appear to
not be fully configured, only the IP address and Subnet Mask are listed. No
Default Gateway or DNS are listed, and adding these values will break ICS.

ICS should work as long as LAN1 is not using 192.168.0.xxx space (IP
address) This page may help;
http://www.microsoft.com/windowsxp/u...02april08.mspx

It's old in that it was written for Windows XP but the principles remain the
same.

--
David Hettel

Please post any reply as a follow-up message in the news group for everyone
to see. I'm sorry, but I don't answer questions addressed directly to me in
E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com

DISCLAIMER: This posting is provided "AS IS" with no warranty of any kind,
either expressed or implied, made in relation to the accuracy, reliability
or content of this post. The author shall not be liable for any direct,
indirect, incidental or consequential damages arising out of the use of, or
inability to use, information or opinions expressed in this post and confers
no rights.



"GeekUnit" <yeah@like.id.tell.you> wrote in message
news:3AEC6D8F-8379-45EB-B27F-4FC801F2FBC9@microsoft.com...
> I've never been able to turn on ICS through my LAN1 connection before, I
> always get errors. Are you sure this is right? It's my understanding
> that when you have only 2 network connections clicking "Allow Other
> Computers.." in the sharing tab of one assumes that the Internet
> connection is the other. So if I was able to enable sharing on LAN1, it'd
> set LAN2's IP address to 192.168.0.1?
>
> Thanks
> - GeekUnit
>
> "David Hettel" <dah618@hotmail.com> wrote in message
> news:e3YXh8xJHHA.3552@TK2MSFTNGP03.phx.gbl...
>> Try this;
>> Opened Control Panel\Network Connections
>> - Opened Properties for LAN1 Note one the Ethernet connection.
>> - Clicked on Sharing Tab
>> - Enabled "Allow Other Computers to Connect Through This Computer's
>> Internet
>> Connection"
>>
>>
>> --
>> David Hettel

>


My System SpecsSystem Spec