View Single Post
Old 03-05-2007   #8 (permalink)
wdaniels74


 
 

Re: Printer Sharing between xp and Vista

I've tried those and have had no success
any other ideas? I've tried on several different networks..at home and
office...it lets me load and then when I try to print anything it says
communication error?
"mgsb" wrote:

> Kerry's suggestion worked for me. I have a Canon MP130 on a XP machine that
> had been shared successfully with other XP machines. After upgrading to Vista
> on one PC, I got the "Access Denied" message when trying to use the MP130 on
> Vista. File sharing worked fine between the two PCs. I did the following:
>
> 1. Downloaded Vista drivers for MP130 from Canon
> 2. Installed the MP130 locally on the Vista PC (which for Canon means having
> to plug in the USB cable - ugh).
> 3. Re-connected MP130 to XP PC
> 4. On the Vista PC, opened the properties page for the MP130.
> 5. Select Port tab
> 6. Choose "Add a port"
> 7. Choose "Local port" (yes, not obvious, but don't use TCP/IP)
> 8. Type in the share name: \\xp-pc-name\printer-name
> 9. Make sure the new port is selected (checked)
>
> Mark
>
> "Kerry Brown" wrote:
>
> > Make sure the XP machine has a user account with the same username and
> > password as you are using on Vista. Another possible problem is drivers. If
> > Vista doesn't have built in drivers for the printer it tries to load the
> > drivers from the XP computer. This probably won't work and shows up as
> > different errors depending on the printer. Sometimes you can get it to work
> > by installing a local printer that is compatible then changing the port in
> > the printer properties to the printer share (i.e.
> > \\computername\printename). What printers are we talking about?
> >
> > --
> > Kerry Brown
> > Microsoft MVP - Shell/User
> > http://www.vistahelp.ca
> >
> >
> > "Gay Lynne Kegan" <GLKegan@cox.net> wrote in message
> > news:257E50B5-51C7-4159-BAB3-48D4B0EDC310@microsoft.com...
> > >I have a few printers connected to my xp machine. I can see the printer on
> > >my Vista computer but when I go to install it I get an access denied
> > >message. What do I do so I can use my printers?
> > >
> > > Gay Lynne
> > >

> >
> >

My System SpecsSystem Spec