Try unplugging the non Vista drive and do your startup repair. Leave the
drive unplugged until you boot, or at least try a couple more times. Let us
know any error messages you get when you try to reboot after the repair
completes if it doesn't boot. (you can always plug it back in if it still
continues to fail)
"Irv" <Irv@discussions.microsoft.com> wrote in message
news
C4AE54B-9667-4861-AC01-C0D08664B3A0@microsoft.com...
> Tried it four or five times to no avail. It will not take it. It keeps
> showing that the Vista installation is on the D:\ Partition of the C:\
> drive.
> No matter what I do it will not change.
> Irv
>
> "John Barnes" wrote:
>
>> Go into your BIOS and change the boot order to have the Vista drive first
>> in
>> boot priority (after the DVD player). You may have to do this in two
>> places, one to put the HD in the proper boot order and another to place
>> the
>> Vista drive at the top of the HD priority.
>> Then insert the Vista DVD and start the install until you get to the
>> place
>> where you have the repair options. Do a repair start or startup or
>> whatever
>> it's called and you will be okay. Prior versions in test required as
>> many
>> as 3 tries before it worked, so don't give up if the first and second
>> tries
>> fail. Do the startup repair, reboot and you should be okay to format the
>> other drive.
>>
>>
>> "Irv" <Irv@discussions.microsoft.com> wrote in message
>> news:0E7A5D5C-5096-46BB-AD55-3724A3DBC1E4@microsoft.com...
>> >I installed C:\Vista and D:\WinXP as a dual boot setup using two SATA
>> >drives
>> > and EasyBCD 1.52. Everything was fine and I continued to use them both
>> > until
>> > I felt everything was stable. I decided it was time to remove the
>> > training
>> > wheels (XP dual boot) using EasyBCD 1.52. I rebooted and everything was
>> > fine.
>> > Now I wanted to format D:\. Right clicking on the drive and selected
>> > Format
>> > it would not allow me to do it. I then proceeded to delete everything
>> > on
>> > the
>> > drive. I can delete everything, but Boot and Bootmgr. It tells me that
>> > they
>> > are in use. To prove this I unplugged the D:\ drive and the system
>> > would
>> > not
>> > boot.
>> > This is what is showing in EasyBCD:
>> > http://i88.photobucket.com/albums/k180/irvdk/Boot.jpg
>> > Can someone tell me what is wrong and how to fix it?
>> >
>>
>>