Same as you so I tried each of the 2 that had entrys individually with each
of 2 options then both but all 6 permutations didnt work so reset back to
original and now 30% time it connects OK but turns off after 10mins and have
to do the old reset
I give up with it unless you know otherwise
I do appreciate your help
ian
"Josh" wrote:
> Flyingdoc wrote:
> > Thanks Josh - how do i do that?
> > also when I tried the microsoft fix there were 2 items listed that could be
> > changed i tried both but how dp i know which was which?
> > i look forward to hearing from you
> > Flyingdoc PS yesterday it worked twice after I HAD GONE BACK TO ORIGINAL
> > SETTINGS THEN LAST THING HEY PRESTO BACK TO THE OLD PROBLEM
> >
> > "Josh" wrote:
>
> Going back to http://support.microsoft.com/kb/928233/en-us - from this I
> only actioned the first registry fix.
>
> i.e. adding DhcpConnDisableBcastFlagToggle.
>
> I did not touch DhcpConnDisableBcastFlagToggle - it is still left with a
> value of 1. I would try setting this one back to 1 and see what happens
> (assuming that this is what you meant and change this value to 0).
>
> Also, not sure of the config of your machine, but under the registry key
> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{GUID}
> I have 3 entries with different GUID values. One was virtually empty of
> settings and of the other two, 1 I guessed was for wireless card and 1
> wired. I added the new registry entry above to both just to be sure!
>
> Let me know what you have done and what it's doing now.
>
> Josh
>