Michael in Ohio

Alan,

I did as instructed, no change. Exact same errors exist. There was not a
value esablished for the IRPStack. I added it per the instructions and set
it to 3. No change. I went back in and reset it to 15. Also no change.

"Alan Morris [MSFT]" wrote:

> I knew this was posted previously. You need to fix the IRPStack on the XP
> machine.
> Thanks for including the complete error.
>
>
> http://support.microsoft.com/default...;EN-US;q177078
>
>
>
> ===============================================
> Cool
>
> the error evaluates to
>
> E:\>winerror 1130
> 1130 ERROR_NOT_ENOUGH_SERVER_MEMORY <--> 0xc0000205
> STATUS_INSUFF_SERVER_RESOURCES
>
> I have no clue what an IRPStack is.
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
> news:ulM1Ag67GHA.4304@TK2MSFTNGP03.phx.gbl...
> > Hurrah ! Hurrah !
> >
> > I finally found the solution !
> >
> > Went to:
> >
> > http://support.microsoft.com/default...EN-US;q177078&
> >
> > On the XP machine, on which the printer is connected, I increased
> >
> > Increas"IRPStackSize" from the existing 11 to 14 (increment of 3)
> > according to recommensdation.
> >
> > And could install the Printer, No Sweat.
> >
> > Georgio, again.
> >
> >
> > "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
> > news:e9N2F957GHA.3760@TK2MSFTNGP02.phx.gbl...
> >> How can you recommend to anybody to switch to Vista RC2 ?
> >>
> >> On existing Local Home Networks, it is impossible to share printers
> >> attached to Win XP Pro Boxes.
> >>
> >> When trying to add those printers (on a Windows Workgroup Network),one
> >> gets an Error message:
> >>
> >> Eroor Code 0x0000046a.
> >>
> >> How can one even consider changing over to Vista? in those circomstances?
> >>
> >> Georgio
> >>
> >
> >
>
>
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in message
> news:293383A3-CB4A-4AEB-AB64-A149C06D8CB9@microsoft.com...
> > Hi Alan,
> >
> > In the Add Printer window, my printer is shown. I attempt to connect to
> > it
> > and receive the following error: [Connect To Printer] Windows cannot
> > connect
> > to the printer. Operation could not be completed (error 0x0000046a)
> >
> > If I attempt to set up a New Printer, Local Printer, New Port,
> > \\computername\printername, I receve the following error: [Local Port] Not
> > enough server storage is available to process this command.
> >
> > I don't if I mentioned, but I can see my shared files and folders on the
> > XP
> > machine and have no problems accessing the files.
> >
> > Thanks,
> >
> >
> > "Alan Morris [MSFT]" wrote:
> >
> >> When do you get the error and what is the exact error message you receive
> >> on
> >> the Vista machine when making the connection.
> >>
> >> Yes this will work if we add a local printer to the Vista machine using
> >> the
> >> inbox driver. But the exact error first please.
> >>
> >> --
> >> Alan Morris
> >> Windows Printing Team
> >> Search the Microsoft Knowledge Base here:
> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
> >> message
> >> news:162EC8C4-B333-4B1E-855C-A17CCE8AC448@microsoft.com...
> >> > Hi Alan,
> >> >
> >> > I do not have this file on my Windows XP machine. To clarify, the
> >> > HP5510
> >> > All In One printer is installed on the Windows XP machine with the
> >> > Vista
> >> > Laptop trying to connect to it.
> >> >
> >> > When looking at the Driver section of the Printer, the only driver
> >> > which
> >> > is
> >> > Check Marked is the [Enviorment] Intel [Version] Windows 2000 or XP.
> >> > I
> >> > thought perhaps that I should download a Vista driver and maintain it
> >> > on
> >> > the
> >> > XP machine, but HP doesn't make this available as it is already shipped
> >> > with
> >> > Vista.
> >> >
> >> > I know the Vista Driver is available on the laptop, but I never get far
> >> > enough in the process to use the driver.
> >> >
> >> > Where to from here?
> >> >
> >> > Thanks,
> >> >
> >> > "Alan Morris [MSFT]" wrote:
> >> >
> >> >> dir \\computer\printshare is an invalid command.
> >> >>
> >> >> Thanks for the driver name. HP has a binary that checks the OS
> >> >> version.
> >> >> The binary only works on Server 2003 and less OS version numbers.
> >> >> This
> >> >> binary will terminate when run in Vista. Since the file is loaded
> >> >> with
> >> >> the
> >> >> driver, the terminating code causes the spooler to fail on Vista.
> >> >> Check
> >> >> the
> >> >> version number of hpbmini.dll on you XP machine
> >> >> \windows\system32\spool\drivers\w32x86\3. The version number should
> >> >> be
> >> >> 18
> >> >> or greater to work on Vista.
> >> >>
> >> >>
> >> >> --
> >> >> Alan Morris
> >> >> Windows Printing Team
> >> >> Search the Microsoft Knowledge Base here:
> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >> >>
> >> >> This posting is provided "AS IS" with no warranties, and confers no
> >> >> rights.
> >> >>
> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
> >> >> message
> >> >> news:90FDAB14-0F4A-4FCC-BEE2-17C9AD944D66@microsoft.com...
> >> >> >I am experiencing the same conditions as many others. I'd like to
> >> >> >work
> >> >> > through it with someone if there is anyone who can help. I have a
> >> >> > new
> >> >> > laptop
> >> >> > with Windows Vista Home Premium.
> >> >> >
> >> >> > I have a desktop with Windows XP SR2 with an HP5510 printer
> >> >> > connected
> >> >> > to
> >> >> > it.
> >> >> > All my other XP computers can connect to it and install the printer.
> >> >> > The
> >> >> > Vista
> >> >> > machine can see the printer, but will receive an error if I try to
> >> >> > connect
> >> >> > to
> >> >> > it.
> >> >> >
> >> >> > I tried a work around I found which included installing it as a
> >> >> > local
> >> >> > printer. This failed also. I tried the dir
> >> >> > \\computername\printername
> >> >> > command in a command window and received "not enough server storage
> >> >> > is
> >> >> > available to process this command" I believe received this error
> >> >> > also
> >> >> > when
> >> >> > I
> >> >> > tried to install the network printer as a loca printer.
> >> >> >
> >> >> > I could use some advise as well. It certainly seems this would be a
> >> >> > simple
> >> >> > process to handle, but with all the similar cases floating around
> >> >> > the
> >> >> > web,
> >> >> > it
> >> >> > doesn't appear to be so. Please help if at all possible.
> >> >> >
> >> >> > Thanks
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>