Did you reboot the XP machine? The setting is for the server service which
is a layer between the spooler on one machine communicating with the spooler
on the other machine
What Anti Virus software are you using?
--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
This posting is provided "AS IS" with no warranties, and confers no rights.
"Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in message
news:38D76294-A1B4-499F-B38B-0837F0F56AAF@microsoft.com...
> Alan,
>
> I did as instructed, no change. Exact same errors exist. There was not a
> value esablished for the IRPStack. I added it per the instructions and
> set
> it to 3. No change. I went back in and reset it to 15. Also no change.
>
> "Alan Morris [MSFT]" wrote:
>
>> I knew this was posted previously. You need to fix the IRPStack on the
>> XP
>> machine.
>> Thanks for including the complete error.
>>
>>
>> http://support.microsoft.com/default...;EN-US;q177078
>>
>>
>>
>> ===============================================
>> Cool
>>
>> the error evaluates to
>>
>> E:\>winerror 1130
>> 1130 ERROR_NOT_ENOUGH_SERVER_MEMORY <--> 0xc0000205
>> STATUS_INSUFF_SERVER_RESOURCES
>>
>> I have no clue what an IRPStack is.
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
>> news:ulM1Ag67GHA.4304@TK2MSFTNGP03.phx.gbl...
>> > Hurrah ! Hurrah !
>> >
>> > I finally found the solution !
>> >
>> > Went to:
>> >
>> > http://support.microsoft.com/default...EN-US;q177078&
>> >
>> > On the XP machine, on which the printer is connected, I increased
>> >
>> > Increas"IRPStackSize" from the existing 11 to 14 (increment of 3)
>> > according to recommensdation.
>> >
>> > And could install the Printer, No Sweat.
>> >
>> > Georgio, again.
>> >
>> >
>> > "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
>> > news:e9N2F957GHA.3760@TK2MSFTNGP02.phx.gbl...
>> >> How can you recommend to anybody to switch to Vista RC2 ?
>> >>
>> >> On existing Local Home Networks, it is impossible to share printers
>> >> attached to Win XP Pro Boxes.
>> >>
>> >> When trying to add those printers (on a Windows Workgroup Network),one
>> >> gets an Error message:
>> >>
>> >> Eroor Code 0x0000046a.
>> >>
>> >> How can one even consider changing over to Vista? in those
>> >> circomstances?
>> >>
>> >> Georgio
>> >>
>> >
>> >
>>
>>
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
>> message
>> news:293383A3-CB4A-4AEB-AB64-A149C06D8CB9@microsoft.com...
>> > Hi Alan,
>> >
>> > In the Add Printer window, my printer is shown. I attempt to connect
>> > to
>> > it
>> > and receive the following error: [Connect To Printer] Windows cannot
>> > connect
>> > to the printer. Operation could not be completed (error 0x0000046a)
>> >
>> > If I attempt to set up a New Printer, Local Printer, New Port,
>> > \\computername\printername, I receve the following error: [Local Port]
>> > Not
>> > enough server storage is available to process this command.
>> >
>> > I don't if I mentioned, but I can see my shared files and folders on
>> > the
>> > XP
>> > machine and have no problems accessing the files.
>> >
>> > Thanks,
>> >
>> >
>> > "Alan Morris [MSFT]" wrote:
>> >
>> >> When do you get the error and what is the exact error message you
>> >> receive
>> >> on
>> >> the Vista machine when making the connection.
>> >>
>> >> Yes this will work if we add a local printer to the Vista machine
>> >> using
>> >> the
>> >> inbox driver. But the exact error first please.
>> >>
>> >> --
>> >> Alan Morris
>> >> Windows Printing Team
>> >> Search the Microsoft Knowledge Base here:
>> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >>
>> >> This posting is provided "AS IS" with no warranties, and confers no
>> >> rights.
>> >>
>> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
>> >> message
>> >> news:162EC8C4-B333-4B1E-855C-A17CCE8AC448@microsoft.com...
>> >> > Hi Alan,
>> >> >
>> >> > I do not have this file on my Windows XP machine. To clarify, the
>> >> > HP5510
>> >> > All In One printer is installed on the Windows XP machine with the
>> >> > Vista
>> >> > Laptop trying to connect to it.
>> >> >
>> >> > When looking at the Driver section of the Printer, the only driver
>> >> > which
>> >> > is
>> >> > Check Marked is the [Enviorment] Intel [Version] Windows 2000 or
>> >> > XP.
>> >> > I
>> >> > thought perhaps that I should download a Vista driver and maintain
>> >> > it
>> >> > on
>> >> > the
>> >> > XP machine, but HP doesn't make this available as it is already
>> >> > shipped
>> >> > with
>> >> > Vista.
>> >> >
>> >> > I know the Vista Driver is available on the laptop, but I never get
>> >> > far
>> >> > enough in the process to use the driver.
>> >> >
>> >> > Where to from here?
>> >> >
>> >> > Thanks,
>> >> >
>> >> > "Alan Morris [MSFT]" wrote:
>> >> >
>> >> >> dir \\computer\printshare is an invalid command.
>> >> >>
>> >> >> Thanks for the driver name. HP has a binary that checks the OS
>> >> >> version.
>> >> >> The binary only works on Server 2003 and less OS version numbers.
>> >> >> This
>> >> >> binary will terminate when run in Vista. Since the file is loaded
>> >> >> with
>> >> >> the
>> >> >> driver, the terminating code causes the spooler to fail on Vista.
>> >> >> Check
>> >> >> the
>> >> >> version number of hpbmini.dll on you XP machine
>> >> >> \windows\system32\spool\drivers\w32x86\3. The version number
>> >> >> should
>> >> >> be
>> >> >> 18
>> >> >> or greater to work on Vista.
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Alan Morris
>> >> >> Windows Printing Team
>> >> >> Search the Microsoft Knowledge Base here:
>> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >> >>
>> >> >> This posting is provided "AS IS" with no warranties, and confers no
>> >> >> rights.
>> >> >>
>> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote
>> >> >> in
>> >> >> message
>> >> >> news:90FDAB14-0F4A-4FCC-BEE2-17C9AD944D66@microsoft.com...
>> >> >> >I am experiencing the same conditions as many others. I'd like to
>> >> >> >work
>> >> >> > through it with someone if there is anyone who can help. I have a
>> >> >> > new
>> >> >> > laptop
>> >> >> > with Windows Vista Home Premium.
>> >> >> >
>> >> >> > I have a desktop with Windows XP SR2 with an HP5510 printer
>> >> >> > connected
>> >> >> > to
>> >> >> > it.
>> >> >> > All my other XP computers can connect to it and install the
>> >> >> > printer.
>> >> >> > The
>> >> >> > Vista
>> >> >> > machine can see the printer, but will receive an error if I try
>> >> >> > to
>> >> >> > connect
>> >> >> > to
>> >> >> > it.
>> >> >> >
>> >> >> > I tried a work around I found which included installing it as a
>> >> >> > local
>> >> >> > printer. This failed also. I tried the dir
>> >> >> > \\computername\printername
>> >> >> > command in a command window and received "not enough server
>> >> >> > storage
>> >> >> > is
>> >> >> > available to process this command" I believe received this error
>> >> >> > also
>> >> >> > when
>> >> >> > I
>> >> >> > tried to install the network printer as a loca printer.
>> >> >> >
>> >> >> > I could use some advise as well. It certainly seems this would
>> >> >> > be a
>> >> >> > simple
>> >> >> > process to handle, but with all the similar cases floating around
>> >> >> > the
>> >> >> > web,
>> >> >> > it
>> >> >> > doesn't appear to be so. Please help if at all possible.
>> >> >> >
>> >> >> > Thanks
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>