The instructions say to increase by 3
So set the key
reboot
retry the connection
fails
change the key by adding 3
reboot
retry the connection
fails
change the key by adding 3
repeat
I'd set it to 50 first, if that works set to 25. If that fails go up 3. If
25 works you can tweak it but you know the default 15 does not.
--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
This posting is provided "AS IS" with no warranties, and confers no rights.
"Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in message
news:3F82FBE9-7823-4A29-BBD2-FBD3DDBCEB81@microsoft.com...
> Yes, the machine has been rebooted a number of times.
>
> Norton System Works Premier 2005 with Norton Anti Virus Version 11.0.16.2
>
> "Alan Morris [MSFT]" wrote:
>
>> Did you reboot the XP machine? The setting is for the server service
>> which
>> is a layer between the spooler on one machine communicating with the
>> spooler
>> on the other machine
>>
>> What Anti Virus software are you using?
>>
>>
>>
>> --
>> Alan Morris
>> Windows Printing Team
>> Search the Microsoft Knowledge Base here:
>> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
>> message
>> news:38D76294-A1B4-499F-B38B-0837F0F56AAF@microsoft.com...
>> > Alan,
>> >
>> > I did as instructed, no change. Exact same errors exist. There was
>> > not a
>> > value esablished for the IRPStack. I added it per the instructions and
>> > set
>> > it to 3. No change. I went back in and reset it to 15. Also no
>> > change.
>> >
>> > "Alan Morris [MSFT]" wrote:
>> >
>> >> I knew this was posted previously. You need to fix the IRPStack on
>> >> the
>> >> XP
>> >> machine.
>> >> Thanks for including the complete error.
>> >>
>> >>
>> >> http://support.microsoft.com/default...;EN-US;q177078
>> >>
>> >>
>> >>
>> >> ===============================================
>> >> Cool
>> >>
>> >> the error evaluates to
>> >>
>> >> E:\>winerror 1130
>> >> 1130 ERROR_NOT_ENOUGH_SERVER_MEMORY <--> 0xc0000205
>> >> STATUS_INSUFF_SERVER_RESOURCES
>> >>
>> >> I have no clue what an IRPStack is.
>> >>
>> >> --
>> >> Alan Morris
>> >> Windows Printing Team
>> >> Search the Microsoft Knowledge Base here:
>> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >>
>> >> This posting is provided "AS IS" with no warranties, and confers no
>> >> rights.
>> >>
>> >> "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
>> >> news:ulM1Ag67GHA.4304@TK2MSFTNGP03.phx.gbl...
>> >> > Hurrah ! Hurrah !
>> >> >
>> >> > I finally found the solution !
>> >> >
>> >> > Went to:
>> >> >
>> >> > http://support.microsoft.com/default...EN-US;q177078&
>> >> >
>> >> > On the XP machine, on which the printer is connected, I increased
>> >> >
>> >> > Increas"IRPStackSize" from the existing 11 to 14 (increment of 3)
>> >> > according to recommensdation.
>> >> >
>> >> > And could install the Printer, No Sweat.
>> >> >
>> >> > Georgio, again.
>> >> >
>> >> >
>> >> > "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in
>> >> > message
>> >> > news:e9N2F957GHA.3760@TK2MSFTNGP02.phx.gbl...
>> >> >> How can you recommend to anybody to switch to Vista RC2 ?
>> >> >>
>> >> >> On existing Local Home Networks, it is impossible to share printers
>> >> >> attached to Win XP Pro Boxes.
>> >> >>
>> >> >> When trying to add those printers (on a Windows Workgroup
>> >> >> Network),one
>> >> >> gets an Error message:
>> >> >>
>> >> >> Eroor Code 0x0000046a.
>> >> >>
>> >> >> How can one even consider changing over to Vista? in those
>> >> >> circomstances?
>> >> >>
>> >> >> Georgio
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Alan Morris
>> >> Windows Printing Team
>> >> Search the Microsoft Knowledge Base here:
>> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >>
>> >> This posting is provided "AS IS" with no warranties, and confers no
>> >> rights.
>> >>
>> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
>> >> message
>> >> news:293383A3-CB4A-4AEB-AB64-A149C06D8CB9@microsoft.com...
>> >> > Hi Alan,
>> >> >
>> >> > In the Add Printer window, my printer is shown. I attempt to
>> >> > connect
>> >> > to
>> >> > it
>> >> > and receive the following error: [Connect To Printer] Windows
>> >> > cannot
>> >> > connect
>> >> > to the printer. Operation could not be completed (error 0x0000046a)
>> >> >
>> >> > If I attempt to set up a New Printer, Local Printer, New Port,
>> >> > \\computername\printername, I receve the following error: [Local
>> >> > Port]
>> >> > Not
>> >> > enough server storage is available to process this command.
>> >> >
>> >> > I don't if I mentioned, but I can see my shared files and folders on
>> >> > the
>> >> > XP
>> >> > machine and have no problems accessing the files.
>> >> >
>> >> > Thanks,
>> >> >
>> >> >
>> >> > "Alan Morris [MSFT]" wrote:
>> >> >
>> >> >> When do you get the error and what is the exact error message you
>> >> >> receive
>> >> >> on
>> >> >> the Vista machine when making the connection.
>> >> >>
>> >> >> Yes this will work if we add a local printer to the Vista machine
>> >> >> using
>> >> >> the
>> >> >> inbox driver. But the exact error first please.
>> >> >>
>> >> >> --
>> >> >> Alan Morris
>> >> >> Windows Printing Team
>> >> >> Search the Microsoft Knowledge Base here:
>> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >> >>
>> >> >> This posting is provided "AS IS" with no warranties, and confers no
>> >> >> rights.
>> >> >>
>> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote
>> >> >> in
>> >> >> message
>> >> >> news:162EC8C4-B333-4B1E-855C-A17CCE8AC448@microsoft.com...
>> >> >> > Hi Alan,
>> >> >> >
>> >> >> > I do not have this file on my Windows XP machine. To clarify,
>> >> >> > the
>> >> >> > HP5510
>> >> >> > All In One printer is installed on the Windows XP machine with
>> >> >> > the
>> >> >> > Vista
>> >> >> > Laptop trying to connect to it.
>> >> >> >
>> >> >> > When looking at the Driver section of the Printer, the only
>> >> >> > driver
>> >> >> > which
>> >> >> > is
>> >> >> > Check Marked is the [Enviorment] Intel [Version] Windows 2000 or
>> >> >> > XP.
>> >> >> > I
>> >> >> > thought perhaps that I should download a Vista driver and
>> >> >> > maintain
>> >> >> > it
>> >> >> > on
>> >> >> > the
>> >> >> > XP machine, but HP doesn't make this available as it is already
>> >> >> > shipped
>> >> >> > with
>> >> >> > Vista.
>> >> >> >
>> >> >> > I know the Vista Driver is available on the laptop, but I never
>> >> >> > get
>> >> >> > far
>> >> >> > enough in the process to use the driver.
>> >> >> >
>> >> >> > Where to from here?
>> >> >> >
>> >> >> > Thanks,
>> >> >> >
>> >> >> > "Alan Morris [MSFT]" wrote:
>> >> >> >
>> >> >> >> dir \\computer\printshare is an invalid command.
>> >> >> >>
>> >> >> >> Thanks for the driver name. HP has a binary that checks the OS
>> >> >> >> version.
>> >> >> >> The binary only works on Server 2003 and less OS version
>> >> >> >> numbers.
>> >> >> >> This
>> >> >> >> binary will terminate when run in Vista. Since the file is
>> >> >> >> loaded
>> >> >> >> with
>> >> >> >> the
>> >> >> >> driver, the terminating code causes the spooler to fail on
>> >> >> >> Vista.
>> >> >> >> Check
>> >> >> >> the
>> >> >> >> version number of hpbmini.dll on you XP machine
>> >> >> >> \windows\system32\spool\drivers\w32x86\3. The version number
>> >> >> >> should
>> >> >> >> be
>> >> >> >> 18
>> >> >> >> or greater to work on Vista.
>> >> >> >>
>> >> >> >>
>> >> >> >> --
>> >> >> >> Alan Morris
>> >> >> >> Windows Printing Team
>> >> >> >> Search the Microsoft Knowledge Base here:
>> >> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>> >> >> >>
>> >> >> >> This posting is provided "AS IS" with no warranties, and confers
>> >> >> >> no
>> >> >> >> rights.
>> >> >> >>
>> >> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com>
>> >> >> >> wrote
>> >> >> >> in
>> >> >> >> message
>> >> >> >> news:90FDAB14-0F4A-4FCC-BEE2-17C9AD944D66@microsoft.com...
>> >> >> >> >I am experiencing the same conditions as many others. I'd like
>> >> >> >> >to
>> >> >> >> >work
>> >> >> >> > through it with someone if there is anyone who can help. I
>> >> >> >> > have a
>> >> >> >> > new
>> >> >> >> > laptop
>> >> >> >> > with Windows Vista Home Premium.
>> >> >> >> >
>> >> >> >> > I have a desktop with Windows XP SR2 with an HP5510 printer
>> >> >> >> > connected
>> >> >> >> > to
>> >> >> >> > it.
>> >> >> >> > All my other XP computers can connect to it and install the
>> >> >> >> > printer.
>> >> >> >> > The
>> >> >> >> > Vista
>> >> >> >> > machine can see the printer, but will receive an error if I
>> >> >> >> > try
>> >> >> >> > to
>> >> >> >> > connect
>> >> >> >> > to
>> >> >> >> > it.
>> >> >> >> >
>> >> >> >> > I tried a work around I found which included installing it as
>> >> >> >> > a
>> >> >> >> > local
>> >> >> >> > printer. This failed also. I tried the dir
>> >> >> >> > \\computername\printername
>> >> >> >> > command in a command window and received "not enough server
>> >> >> >> > storage
>> >> >> >> > is
>> >> >> >> > available to process this command" I believe received this
>> >> >> >> > error
>> >> >> >> > also
>> >> >> >> > when
>> >> >> >> > I
>> >> >> >> > tried to install the network printer as a loca printer.
>> >> >> >> >
>> >> >> >> > I could use some advise as well. It certainly seems this
>> >> >> >> > would
>> >> >> >> > be a
>> >> >> >> > simple
>> >> >> >> > process to handle, but with all the similar cases floating
>> >> >> >> > around
>> >> >> >> > the
>> >> >> >> > web,
>> >> >> >> > it
>> >> >> >> > doesn't appear to be so. Please help if at all possible.
>> >> >> >> >
>> >> >> >> > Thanks
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>