Copy does not work in Windows -- you have to install.
You have three different things to set up: the scsi card which you seem
to have done, the installation of the Scanning software and the
installation of the scanner itself.
You need to do all three and in that order.
Next step is to download the Deskscan 2.9 software:
http://h20180.www2.hp.com/apps/Nav?h...lang=en&h_cc=u
s&h_product=sj5ppc
use the Save option, note where it saves it to so you can find it again
and do not try to install it until I come back with instructions.
But check and see if you have a copy of:
sj166en.exe 1/1 (4.65M)
on your hard drive in which case you need not download since that is
Deskscn 2.9.
Make sure your scanner is not connected to the PC.
Check in Control Panel / Uninstall and see if there are any references
to HP scanning or copying software. If there are Uninstall them. Look
in Control Panel / Fax and Scan and delete any icons for scanning or
faxing.
Then stop and let me know where you are at so I can get together the
actual installation instructions.