Hi:
I don't think I've communicated my question right.
Here's what I want to do:
1. Enable incoming connections on my Vista PC at home from Network & Sharing
Center -> Manage Network Connections -> File -> New Incoming Connection.
2. Once I set that up, I would like to connect to this PC from my laptop
over the Internet (how?)
How do I address my Vista PC over the Internet? It either has to have a
static and public IP address or a host name registered in the global DNS
pointing to a static and public IP address or a simulated static and public
IP address (through dynamic DNS).
Please enlighten me.
Thanks.
"Jesper" wrote:
> It will work the same way any other packet that goes through a network
> address translator works (DHCP is entirely orthogonal to this issue). PPTP,
> proposed in RFC 2637, simply encapsulates a TCP or UDP session in a GRE
> packet. The surrounding IP packet gets address translated just like any other
> traffic, in accordance with RFC 2663.
>
> This is the same way IPsec works, except that IPsec validates the source
> address on the encapsulating packet. Therefore you have to use IPsec NAT-T,
> per RFCs 3715, 3947, and 3948, and perform the encapsulation inside a UDP
> packet instead of GRE. That's all handled automatically by the stack in
> Windows.
>
> When you connect you get an address local to the remote network. That
> address is link-local to the VPN head-end and it will respond to ARP messages
> for that address. When it gets a request for that address it simply
> encapsulates the packet and ships it to you across the VPN.
>
> This stuff has worked for 10 years at least, longer if you count pre-cursor
> technologies like PPP. It's not exactly new technology.
> ---
> Your question may already be answered in Windows Vista Security:
> http://www.amazon.com/gp/product/047...otectyourwi-20
>
>
> "JJ" wrote:
>
> > Well, how is it going to work over the Internet if the Vista PC doesn't have
> > a static and public IP address?
> >
> > Thx.
> >
> > "Jesper" wrote:
> >
> > > Yes.
> > > ---
> > > Your question may already be answered in Windows Vista Security:
> > > http://www.amazon.com/gp/product/047...otectyourwi-20
> > >
> > >
> > > "JJ" wrote:
> > >
> > > > Can this work with Vista over the Internet?
> > > >
> > > > Thanks.
> > > >
> > > > "Jesper" wrote:
> > > >
> > > > > PPTP is a perfectly acceptable VPN technology, although IPsec is a more
> > > > > common technology to use now. Both use encrypted connections (which is
> > > > > essentially the definition of VPN) and neither needs static addresses.
> > > > > ---
> > > > > Your question may already be answered in Windows Vista Security:
> > > > > http://www.amazon.com/gp/product/047...otectyourwi-20
> > > > >
> > > > >
> > > > > "JJ" wrote:
> > > > >
> > > > > > Hi:
> > > > > >
> > > > > > I found an interesting article on the Web while searching for a VPN solution
> > > > > > that runs on Vista:
> > > > > > http://theillustratednetwork.mvps.or...P/PPTPVPN.html
> > > > > >
> > > > > > This solution is built into Vista. Is this secure? Does this use encrypted
> > > > > > connnections? And wouldn't I need a static and public IP address for the PC
> > > > > > running Vista for this to work?
> > > > > >
> > > > > > Thx.
> > > > > >