Check out KB listed below:
http://support.microsoft.com/kb/929777/en-us
--
Regards
Bob J
If advise given from anyone, solves problem or not, or if solved from
another source,post back & let us know.
Then we all benefit.
"CaptainJeff" wrote:
> Hello all.
>
> Having a little trouble that I hope you can help with. The problem is that
> Vista bluescreens with an "IRQL_NOT_LESS_OR_EQUAL" Stop error code 0x0000000A.
>
> The problem is definitely something to do with the RAM, though it is not a
> faulty board. The system boots successfully with three out of the four 1GB
> RAM boards installed, though inserting any fourth RAM board causes the above
> problem.
>
> My system setup is as follows:
>
> AMD Athlon 64 X2 Dual Core 6000+ running at 3.0 GHz
> 4GB of PC4200 RAM across four DDR2 modules
> ASUS M2NPV-VM motherboard with BIOS updated to the latest non-beta release
> nVidia GeForce 8800 GTS
>
> Two 500GB SATA drives in a RAID 1 configuration using the motherboard's
> onboard RAID controller
> Two SATA DVD RW drives.
>
> Running Vista Ultimate x64 Version
>
> Any suggestions are welcome. Thank you.