Alan,
I'm having a problem when printing powerpoint 2007 (more than six pages)
from a Vista machine through a W2003 Server SP2. On the Dell W5310 printer
it gives a "900.00 SERVICE RIP SOFTWARE" error. If I print less than six
pages it's ok. I also created a local TCP/IP printer and it will print all
27 pages from the same Vista pc.
--
Gary Sakaguchi
"Alan Morris [MSFT]" wrote:
> The instructions say to increase by 3
>
> So set the key
> reboot
> retry the connection
> fails
> change the key by adding 3
> reboot
> retry the connection
> fails
> change the key by adding 3
> repeat
>
> I'd set it to 50 first, if that works set to 25. If that fails go up 3. If
> 25 works you can tweak it but you know the default 15 does not.
>
>
>
>
>
> --
> Alan Morris
> Windows Printing Team
> Search the Microsoft Knowledge Base here:
> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in message
> news:3F82FBE9-7823-4A29-BBD2-FBD3DDBCEB81@microsoft.com...
> > Yes, the machine has been rebooted a number of times.
> >
> > Norton System Works Premier 2005 with Norton Anti Virus Version 11.0.16.2
> >
> > "Alan Morris [MSFT]" wrote:
> >
> >> Did you reboot the XP machine? The setting is for the server service
> >> which
> >> is a layer between the spooler on one machine communicating with the
> >> spooler
> >> on the other machine
> >>
> >> What Anti Virus software are you using?
> >>
> >>
> >>
> >> --
> >> Alan Morris
> >> Windows Printing Team
> >> Search the Microsoft Knowledge Base here:
> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
> >> message
> >> news:38D76294-A1B4-499F-B38B-0837F0F56AAF@microsoft.com...
> >> > Alan,
> >> >
> >> > I did as instructed, no change. Exact same errors exist. There was
> >> > not a
> >> > value esablished for the IRPStack. I added it per the instructions and
> >> > set
> >> > it to 3. No change. I went back in and reset it to 15. Also no
> >> > change.
> >> >
> >> > "Alan Morris [MSFT]" wrote:
> >> >
> >> >> I knew this was posted previously. You need to fix the IRPStack on
> >> >> the
> >> >> XP
> >> >> machine.
> >> >> Thanks for including the complete error.
> >> >>
> >> >>
> >> >> http://support.microsoft.com/default...;EN-US;q177078
> >> >>
> >> >>
> >> >>
> >> >> ===============================================
> >> >> Cool
> >> >>
> >> >> the error evaluates to
> >> >>
> >> >> E:\>winerror 1130
> >> >> 1130 ERROR_NOT_ENOUGH_SERVER_MEMORY <--> 0xc0000205
> >> >> STATUS_INSUFF_SERVER_RESOURCES
> >> >>
> >> >> I have no clue what an IRPStack is.
> >> >>
> >> >> --
> >> >> Alan Morris
> >> >> Windows Printing Team
> >> >> Search the Microsoft Knowledge Base here:
> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >> >>
> >> >> This posting is provided "AS IS" with no warranties, and confers no
> >> >> rights.
> >> >>
> >> >> "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in message
> >> >> news:ulM1Ag67GHA.4304@TK2MSFTNGP03.phx.gbl...
> >> >> > Hurrah ! Hurrah !
> >> >> >
> >> >> > I finally found the solution !
> >> >> >
> >> >> > Went to:
> >> >> >
> >> >> > http://support.microsoft.com/default...EN-US;q177078&
> >> >> >
> >> >> > On the XP machine, on which the printer is connected, I increased
> >> >> >
> >> >> > Increas"IRPStackSize" from the existing 11 to 14 (increment of 3)
> >> >> > according to recommensdation.
> >> >> >
> >> >> > And could install the Printer, No Sweat.
> >> >> >
> >> >> > Georgio, again.
> >> >> >
> >> >> >
> >> >> > "George J Meier" <jost@meierNOCAPITALS.screaming.net> wrote in
> >> >> > message
> >> >> > news:e9N2F957GHA.3760@TK2MSFTNGP02.phx.gbl...
> >> >> >> How can you recommend to anybody to switch to Vista RC2 ?
> >> >> >>
> >> >> >> On existing Local Home Networks, it is impossible to share printers
> >> >> >> attached to Win XP Pro Boxes.
> >> >> >>
> >> >> >> When trying to add those printers (on a Windows Workgroup
> >> >> >> Network),one
> >> >> >> gets an Error message:
> >> >> >>
> >> >> >> Eroor Code 0x0000046a.
> >> >> >>
> >> >> >> How can one even consider changing over to Vista? in those
> >> >> >> circomstances?
> >> >> >>
> >> >> >> Georgio
> >> >> >>
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >> --
> >> >> Alan Morris
> >> >> Windows Printing Team
> >> >> Search the Microsoft Knowledge Base here:
> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >> >>
> >> >> This posting is provided "AS IS" with no warranties, and confers no
> >> >> rights.
> >> >>
> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote in
> >> >> message
> >> >> news:293383A3-CB4A-4AEB-AB64-A149C06D8CB9@microsoft.com...
> >> >> > Hi Alan,
> >> >> >
> >> >> > In the Add Printer window, my printer is shown. I attempt to
> >> >> > connect
> >> >> > to
> >> >> > it
> >> >> > and receive the following error: [Connect To Printer] Windows
> >> >> > cannot
> >> >> > connect
> >> >> > to the printer. Operation could not be completed (error 0x0000046a)
> >> >> >
> >> >> > If I attempt to set up a New Printer, Local Printer, New Port,
> >> >> > \\computername\printername, I receve the following error: [Local
> >> >> > Port]
> >> >> > Not
> >> >> > enough server storage is available to process this command.
> >> >> >
> >> >> > I don't if I mentioned, but I can see my shared files and folders on
> >> >> > the
> >> >> > XP
> >> >> > machine and have no problems accessing the files.
> >> >> >
> >> >> > Thanks,
> >> >> >
> >> >> >
> >> >> > "Alan Morris [MSFT]" wrote:
> >> >> >
> >> >> >> When do you get the error and what is the exact error message you
> >> >> >> receive
> >> >> >> on
> >> >> >> the Vista machine when making the connection.
> >> >> >>
> >> >> >> Yes this will work if we add a local printer to the Vista machine
> >> >> >> using
> >> >> >> the
> >> >> >> inbox driver. But the exact error first please.
> >> >> >>
> >> >> >> --
> >> >> >> Alan Morris
> >> >> >> Windows Printing Team
> >> >> >> Search the Microsoft Knowledge Base here:
> >> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >> >> >>
> >> >> >> This posting is provided "AS IS" with no warranties, and confers no
> >> >> >> rights.
> >> >> >>
> >> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com> wrote
> >> >> >> in
> >> >> >> message
> >> >> >> news:162EC8C4-B333-4B1E-855C-A17CCE8AC448@microsoft.com...
> >> >> >> > Hi Alan,
> >> >> >> >
> >> >> >> > I do not have this file on my Windows XP machine. To clarify,
> >> >> >> > the
> >> >> >> > HP5510
> >> >> >> > All In One printer is installed on the Windows XP machine with
> >> >> >> > the
> >> >> >> > Vista
> >> >> >> > Laptop trying to connect to it.
> >> >> >> >
> >> >> >> > When looking at the Driver section of the Printer, the only
> >> >> >> > driver
> >> >> >> > which
> >> >> >> > is
> >> >> >> > Check Marked is the [Enviorment] Intel [Version] Windows 2000 or
> >> >> >> > XP.
> >> >> >> > I
> >> >> >> > thought perhaps that I should download a Vista driver and
> >> >> >> > maintain
> >> >> >> > it
> >> >> >> > on
> >> >> >> > the
> >> >> >> > XP machine, but HP doesn't make this available as it is already
> >> >> >> > shipped
> >> >> >> > with
> >> >> >> > Vista.
> >> >> >> >
> >> >> >> > I know the Vista Driver is available on the laptop, but I never
> >> >> >> > get
> >> >> >> > far
> >> >> >> > enough in the process to use the driver.
> >> >> >> >
> >> >> >> > Where to from here?
> >> >> >> >
> >> >> >> > Thanks,
> >> >> >> >
> >> >> >> > "Alan Morris [MSFT]" wrote:
> >> >> >> >
> >> >> >> >> dir \\computer\printshare is an invalid command.
> >> >> >> >>
> >> >> >> >> Thanks for the driver name. HP has a binary that checks the OS
> >> >> >> >> version.
> >> >> >> >> The binary only works on Server 2003 and less OS version
> >> >> >> >> numbers.
> >> >> >> >> This
> >> >> >> >> binary will terminate when run in Vista. Since the file is
> >> >> >> >> loaded
> >> >> >> >> with
> >> >> >> >> the
> >> >> >> >> driver, the terminating code causes the spooler to fail on
> >> >> >> >> Vista.
> >> >> >> >> Check
> >> >> >> >> the
> >> >> >> >> version number of hpbmini.dll on you XP machine
> >> >> >> >> \windows\system32\spool\drivers\w32x86\3. The version number
> >> >> >> >> should
> >> >> >> >> be
> >> >> >> >> 18
> >> >> >> >> or greater to work on Vista.
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> --
> >> >> >> >> Alan Morris
> >> >> >> >> Windows Printing Team
> >> >> >> >> Search the Microsoft Knowledge Base here:
> >> >> >> >> http://support.microsoft.com/default.aspx?scid=fh;[ln];kbhowto
> >> >> >> >>
> >> >> >> >> This posting is provided "AS IS" with no warranties, and confers
> >> >> >> >> no
> >> >> >> >> rights.
> >> >> >> >>
> >> >> >> >> "Michael in Ohio" <MichaelinOhio@discussions.microsoft.com>
> >> >> >> >> wrote
> >> >> >> >> in
> >> >> >> >> message
> >> >> >> >> news:90FDAB14-0F4A-4FCC-BEE2-17C9AD944D66@microsoft.com...
> >> >> >> >> >I am experiencing the same conditions as many others. I'd like
> >> >> >> >> >to
> >> >> >> >> >work
> >> >> >> >> > through it with someone if there is anyone who can help. I
> >> >> >> >> > have a
> >> >> >> >> > new
> >> >> >> >> > laptop
> >> >> >> >> > with Windows Vista Home Premium.
> >> >> >> >> >
> >> >> >> >> > I have a desktop with Windows XP SR2 with an HP5510 printer
> >> >> >> >> > connected
> >> >> >> >> > to
> >> >> >> >> > it.
> >> >> >> >> > All my other XP computers can connect to it and install the
> >> >> >> >> > printer.
> >> >> >> >> > The
> >> >> >> >> > Vista
> >> >> >> >> > machine can see the printer, but will receive an error if I