Thanks. None of those relate to INTERNAL_POWER_FAILURE
Jon
"Kue2" <h.j.kennedy@xxxxxx> wrote in message
news:ePBpFeeCIHA.3848@xxxxxx
Quote:
> try here http://support.microsoft.com/kb/941600
>
> "Jon Davis" <jon@xxxxxx> wrote in message
> news:ubZYyPeCIHA.4836@xxxxxx Quote:
>>I have a weird problem. I don't want to replace my motherboard (MSI P965
>>Platinum), but I don't know what else this could be, except perhaps
>>Windows Vista.
>>
>> When I boot up, around the time that it switches to high-resolution view
>> (before login) I get a BSOD with the error being
>> "INTERNAL_POWER_FAILURE". The BSOD goes away if I boot with ALL USB
>> devices disconnected.
>>
>> But here's where I suspect it's Vista: once I get to the login screen, I
>> can connect my USB hub and carry on like there's no problem.
>>
>> My USB hub is a the absolute best $60 high-powered USB hub I could find
>> (Dr. Bott T7Hub), and it replaces a generic high-power USB hub I had also
>> tried. I've found that the problem still exists even if I just hook the
>> keyboard and mouse alone directly to the computer and no USB hub, and the
>> wireless USB keyboard/mouse combo is also newly replaced from some old
>> legacy USB keyboard and PS/2 mouse from long after the problem arose.
>>
>> I've replaced the chassis power supply as well, going up from a 500W
>> Antec unit to a 600W unit.
>>
>> It seems Vista is doing some lame equalibrium test during boot-up and
>> only during boot-up, and puking when it sees there's something odd. But,
>> hello, Microsoft, that's the BIOS's job, not yours!! I wonder if there's
>> some way to disable this check?
>>
>> Meanwhile, I've been using my compuer for about ten months now, just
>> pulling the plug on the USB hub uplink until I get to the login screen.
>>
>> Jon
>>
>