msahci.sys is present and yes, i set the registry key to 0...
"John" <me@xxxxxx> wrote in message
news:#PtAzrbEIHA.5208@xxxxxx
Quote:
> Silly question but did you enable the registry key with a 1 or 0? Usually
> enabling is a 1 but in this case enabling needs a 0 value. Also you might
> see what driver is currently installed for the HDD controller. Also check
> for the presence of system32\drivers\msahci.sys.
>
>
> "Sebastian Vega" <nospam@xxxxxx> wrote in message
> news:30D1FABC-3CBE-4EB8-A306-5A94C85185FE@xxxxxx Quote:
>> Hello!
>> I bought a PC with Vista Home Premium preinstalled and an intel G33
>> chipset.
>> However, SATA mode in BIOS was set to IDE. If I set it to AHCI or RAID, I
>> would get a BSOD.
>> So I enabled AHCI driver in Vista in the registry, with no success. I
>> also tried installing intel Matrix drivers, but the installer says my
>> system does not meet minimum requirements.
>> So what do I have to do now to enable AHCI/RAID mode on an installed
>> system?
>> Thanks
>> Sebastian
>>
>>
>
>