If you want to be ultra safe use the right click 'eject' option, not the
'remove' but almost always just physically remove after you use it.
Michael
"Wandering" <amore.dei@xxxxxx> wrote in message
news:#Pv8ZRSMIHA.2268@xxxxxx
Quote:
> You don't - You just plug it in to use it, and moments after you are
> finished, just pull it out. Most people have no practical use for the
> Safely Remove feature. It is primarily for use with delayed write on
> disks, to make sure it's all clear before unplugging. But the default for
> all disks is not to use it, so there is no need for it.
>
> Never use it with flash drives or other such gadgets. Good luck.
>
>
> "Max" <Max@xxxxxx> wrote in message
> news:2EBA16F3-8076-4EF3-A0A9-32F80423B32B@xxxxxx Quote:
>> Hi Wandering.
>>
>> I might have done that. How can I identify which is the driver for the
>> card
>> reader and how do I go about deleting it safely?
>>
>> "Wandering" wrote:
>> Quote:
>>> Did you use Safely Remove on the card before pulling it out? If so you
>>> have
>>> actually removed the Card Reader. You may have to delete the driver and
>>> reinstall it.
>>>
>>>
>>> "Max" <Max@xxxxxx> wrote in message
>>> news:785F2630-6ED2-4262-B5C4-2668122CF02A@xxxxxx
>>> > Hi to all!!
>>> >
>>> > I really hope that you can help me.
>>> >
>>> > I have an HP Pavilion T730m computer running Vista Ultimate, 180 GB HD
>>> > and
>>> > 1
>>> > GB of RAM. It has an internal 9 in 1 Memory Card Reader (SD, Compact
>>> > Flash,
>>> > XD, etc) with an USB 2.0 interface to plug usb devices like ipods, usb
>>> > drives, etc.
>>> >
>>> > When I first installed Vista the internal card reader worked
>>> > perfectly, I
>>> > would just insert the card and/or the usb device and it would be
>>> > recognized
>>> > automatically. However after some Vista update, the card reader
>>> > stopped
>>> > working completely. Nothing happens if I insert a card in any of the
>>> > slots
>>> > or
>>> > if I plug a usb device into the available usb port.
>>> >
>>> > I would really appreciate any and all help, since I would like to make
>>> > this
>>> > work again.
>>> >
>>> > Thanks
>>> >
>>> > Max
>>>
>>>
>