OK, I'll double check the Firewall.
However, the client is less than straight forward for checking.
Any tips on that area?
"Sachin" wrote:
Quote:
> Hi,
>
> I would check the firewall rules. I don't know much about the Juniper
> device, but it sounds like you have done the correct thing there, but
> double check it.
>
> Also, check the firewall rules on the clients. The rules may allow file
> sharing traffic only on the same subnet.
>
> Sachin
>
>
> Helboy wrote: Quote:
> > Hello
> >
> > I am a reasonably experienced Windows networking user (I have been
> > networking Windows PCs together since Win 3.1) and also a network engineer.
> >
> > Vista has thrown an interesting issue up.
> >
> > I have a Juniper SSG 20 router with an ADSL, wifi and Lan interface on it.
> > The way the Juniper works is it forces the wifi connection to be on a
> > different subnet than the wired network. So, I have a wired network of
> > 192.168.1.X and 192.168.2.X for wifi.
> >
> > If my PCs are on the same subnet (both on wired or both on wifi), no
> > problems. I can share and make network shares available.
> >
> > If my PCs are on the different networks they cannot see each other and
> > network shares fail.
> >
> > I can ping between the PCs when they are on different subnets, so net
> > connectivity is there.
> > I believe that the Juniper is set up correctly (I have set up a
> > bi-directional trust - any any between the two networks).
> >
> > Has Vista introduced a new level of security preventing browsing between
> > subnets?
> >
>