Nup, continually tells me that Disk Managemnt has had an unexpected error,
refresh Disk Management Console and to restart Disk Management...I do all
this but to no avail...wont mount a new volume....
Rgds
Rod
"Rick Rogers" <rick@xxxxxx> wrote in message
news:%239qnYCaYIHA.3696@xxxxxx
Quote:
> Hi Rod,
>
> You'll need to format it before you can use it, but before you do that you
> first have to create a volume on it. Until you do, it will not appear in
> Windows Explorer. To create a volume, right click the drive in Disk
> Manager, you will see the option there.
>
> By the way, you can have two IDE devices per cable, and two IDE
> connections on the motherboard, or a total of 4 devices. Additional
> drives, whether optical or hard drive, would require an add-on controller
> card or sata connections.
>
> --
> Best of Luck,
>
> Rick Rogers, aka "Nutcase" - Microsoft MVP
> http://mvp.support.microsoft.com/
> Windows help - www.rickrogers.org
> My thoughts http://rick-mvp.blogspot.com
>
> "LD" <ldavies@xxxxxx> wrote in message
> news:e0vo6zZYIHA.3696@xxxxxx Quote:
>> Hi
>>
>> I installed a secondary HDD in my wife's Vista Premium PC. It 'installed"
>> and drivers installed and Vista "says" your new HDD is ready to use.
>>
>> However, in Computer/Explorer there is NO 2nd HDD and I couldnt "use
>> it"....
>>
>> I took it down to local computer shop. They investigated and told me that
>> the motherboard would only recognise 2 IDE devices (the first HDD and the
>> DVD Burner). They suggested that they replace the DVD Burner with an
>> ATAPI device (?) which I did OK and that then the 2nd IDE HDD would be
>> operational.
>>
>> Now I DID rush them, and I didnt actually see it working, but paying for
>> it, I left the shop and came home with the PC.
>>
>> Of course, the 2nd HDD is STILL not visible/usable in any way.
>>
>> When I right click on My Computer and go "Manage" and go thru to Disk
>> Management, the 2nd HDD IS VISIBLE. I thought I may have to Format it.
>> BUT clicking on this brings up an error message that Disk Management has
>> failed and to restart your computer. I do, no help......
>>
>> ...and EVERY tiem I DO restart the computer the SYSTEM has changed screen
>> comes up 2 times:
>>
>> 1st.time ....Found a new HDD (the original, first HDD) hit F1 to accept
>> changes
>> 2nd time... Found new HDD (NEW 250GB one) and LiteOn DVD Burner hit F1
>> to accept changes
>>
>> then correctly thru to normal Vista boot/login...
>>
>> This is EVERY TIME I start PC....
>>
>> Any thoughts/advice would be greatly GREATLY welcomed.
>>
>> Rgds
>> Rod
>> Perth
>>
>