Steve
Sorrry for the delay
Yes I tried F5 and nothing
On my pc I only see my PC in the display
"View workgroup computers is the display"
On the other two pc's in the same workgroup they only see my computer in the
display
That is strange they should at least see themselves
It kind of works right after a restart the appear but after awhile they are
gone
This only started after the upgrade of WOC with all this new oncecare circle
features which is nice
Any ideas?
Thanks
Tom
PS PING is still working thanks for that info
"StephenB" <sboots@xxxxxx> wrote in message
news:eoi9q3t2qgbfa60prnhh2naqq6m3uvvno4@xxxxxx
| Quote: |  | |
|
> Yes, the F5 refresh would be what I meant, Thomas.
> Still not working?
>
> -steve
> "Thomas Grassi" <thomasgrassi@xxxxxx> wrote:
> | Quote: | | | |
>>Steve
>>
>>Yes only one network adaptor is active
>>Yes I checked File and Print sharing for intenet and subnet on all three
>>pc's
>>
>>What do you mean a refresh? F5 on the display If so done that several
>>times
>>
>>I will try a restart
>>
>>I did restart the browser service and that did not help
>>
>>Thanks for the help
>>
>>"StephenB" <sboots@xxxxxx> wrote in message
>>news:c6g7q356kkbkm2m6avva173j19bt0gorro@xxxxxx | Quote: | | | |
>>> The PCs should appear in workgroup immediately without a reboot, though
>>> you may
>>> need to do a refresh.
>>> Did you verify that only one network adapter was shown as connected?
>>> Did you try the option to do File and Printer Sharing for Internet and
>>> subnet?
>>> -steve
>>> "Thomas Grassi" <thomasgrassi@xxxxxx> wrote:
>>>
>>>>Steve
>>>>
>>>>Thanks for the info
>>>>
>>>>I can now ping great
>>>>
>>>>Still can not view the other pcs in the workgroup display but I can
>>>>connect
>>>>via IE7
>>>>
>>>>How long does the network take to discover or should I restart the PC's
>>>>after these changes
>>>>
>>>>Thanks again
>>>>
>>>>Tom
>>>>
>>>>"StephenB" <sboots@xxxxxx> wrote in message
>>>>news:svp5q39791kkqjs6qov9rpe8nf4emj8t9s@xxxxxx
>>>>> "Thomas Grassi" <thomasgrassi@xxxxxx> wrote:
>>>>>
>>>>>>After the latest update of WOC now workgroups and ping does not work.
>>>>>>
>>>>>>What is up with this product?
>>>>>>
>>>>>>They need to check things out before they send out updtaes
>>>>>>
>>>>>>Please help
>>>>>>
>>>>> Open OneCare.
>>>>> Click Change Settings.
>>>>> On the Firewall tab, click Configure Firewall
>>>>> Make sure that the Network is shown as "Home or Work" and not
>>>>> "Public"
>>>>> If it is "Public" click Change Location
>>>>> Click Advanced settings
>>>>> On the Ports and protocols tab -
>>>>> place a check mark next to ICMPv4 Inbound
>>>>> note the state of the two entries for File and Printer Sharing:
>>>>> - for local network(subnet) should be checked
>>>>> - for subnet and Internet can optionally be checked.
>>>>> On the Network connections tab -
>>>>> make sure that there is only one active connection listed as
>>>>> connected.
>>>>> More than one active connection may cause the firewall to default
>>>>> to
>>>>> Public
>>>>> state, no matter that you've identified the network(s) as "Home or
>>>>> Work."
>>>>>
>>>>> Pings are not responded to by default unless you configure the ICMPv4
>>>>> setting.
>>>>> OneCare 2.0 was tested extensively before release, Thomas. There was a
>>>>> Public
>>>>> beta that went on for much of the last half of 2007.
>>>>>
>>>>> -steve
>>>
>>> --
>>> Stephen Boots
>>> MVP Windows Live
>>> Windows Live OneCare Forum Moderator
>>> sboots@xxxxxx
| | | | | >> | | | | | >
> --
> Stephen Boots
> MVP Windows Live
> Windows Live OneCare Forum Moderator
> sboots@xxxxxx | |
| | |