View Single Post
Old 03-13-2008   #5 (permalink)
the wharf rat


 
 

Re: Major Troubles: Power Supply or Corrupt Install??

In article <DF44A77E-A389-4A6F-A798-D2BD970D6B20@xxxxxx>,
Dwarf <Dwarf@xxxxxx> wrote:
Quote:

>
>If you are using average rated components, I recommend a supply of 650W.
Well, that's just silly. There must be something wrong with your
figures because even a decent 380 watt PS is perfectly adequate for an
ordinary desktop system.

For instance, I make an 80mm case fan to be 12v x .15a = 1.8 watts.
Are you figuring startup current as your steady state? That would only
apply to motor driven parts like fans and drives. That's momentary and
the other components aren't drawing anywhere near peak when it happens.
And what x86 CPU uses 150 watts? Max current for an AMD X2 is 89. Some
of the Intel quads get as high as 130...
Quote:

>Motherboard 50W 75W 62.5W 15w
>Processor 25W 150W 87.5W 90w
>RAM 10W 30W 20.0W 6w
>Graphics 25W 200W 112.5W 60w
>Hard Disk 90W 180W 135.0W 14w
>Optical 30W 70W 50.0W 30w
>Cooling Fan 6W 10W 8.0W 1.8wx3=5.4w
My figures are closer to 250 peak 180 steady state... So a
300-350w power supply should be fine for normal usage...

My System SpecsSystem Spec