in my ethernet device I see serveral option ranging from
1000 Mbps full to 10 Mbps half
I know that my network card only goes up to 100
should I set it as 100Mbps half then ?
what's the diference between half and full ?
cheers : )
--
www.james-ho.com news://news.balabu.net/balaboy.james
有事找我.
"Mark L. Ferguson" <MarkLFerguson@xxxxxx> wrote in
message news:CCDCE196-C5C5-4646-9F9E-97F4FBC96873@xxxxxx
Quote:
>I have no prob with Bob C's advice, but it didn't work for my system. I had
> to set the Properties of the Ethernet device, in device manager, to '10
> Mpbs
> half duplex' to get the speed up. YMMV, I would try changing to several
> speeds to see what works best.
> --
> Was this helpful? Then click the "Yes" Ratings button. Voting helps the
> web
> interface. http://www.microsoft.com/wn3/locales...help_en-us.htm see
> ''rate a post''
>
> Mark L. Ferguson
>
>
> "NB" wrote:
> Quote:
>> I loaded Vista SP1 on three different computers. Two at home and one at
>> work.
>>
>> I have experienced major reductions in file copy performance over the
>> network.
>>
>> At work, my Vista x64 SP1 station has seen an 18 to 20 fold reduction in
>> network file copy performance between some servers. The reduction in
>> performance is from about 40 MB/s to 600 KB/s between certain Win2K3
>> servers.
>>
>> At home, I have three Vista x64 systems. Two have SP1 and one does not.
>> Copying files from one Vista SP1 system to the other SP1 system has seen
>> a
>> 20 fold reduction in performance after SP1, however the performance
>> reduction
>> is only in one direction. If I copy files TO the other machine, it's
>> slow,
>> but if I copy files FROM the other machine, it's very fast. After SP1,
>> the
>> speed was reduced from about 80 MB/s to less than 5 MB/s. I have no
>> performance issues copying to or from the non-SP1 machine from the other
>> SP1
>> machines.
>>
>> Of course, this is totally unacceptable and I cannot run the machines
>> like
>> that. I have uninstalled SP1 from my work machine and now it's fine
>> again.
>>
>> At home, I've messed with it for days, trying all kinds of different
>> suggestions, drivers, registry hacks, and even tried different network
>> cards
>> to no avail.
>>
>> If I cannot fix these network performance issues, I won't be able to use
>> SP1.
>> I'm really at a loss and grasping at straws here.
>>
>> Does anyone have any ideas?