Hello,
A couple of comments.
1) the drive should be at least 1.5 gig. you need at least one gig volume
to do backup so the 1.5 inlcudes some buffer.
Plus you need around 350-400 meg free if you ever want to upgrade or start
Windows Vista or Windows Server 2008 setup from within Windows. You will
be blocked from running setup unless there is that much free space.
2) In addition to the boot files, you need to reset the boot sector, to be
able to boot. ( Repair process should work here is all the files are in
place and you have set the partition as the active boot partition)
3) you need to be sure to set the partition with the boot files as the
active primary partition.
Thanks,
Darrell Gorter[MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights
--------------------
|> From: PaxeSalute <PaxeSalute.37v9m3@xxxxxx-mx.forums.net>
|> Subject: How to Re-Partition Boot files Partition
|> Date: Mon, 14 Apr 2008 11:52:00 -0500
|> Message-ID: <PaxeSalute.37v9m3@xxxxxx-mx.forums.net>
|> Organization: Forums
|> User-Agent: vBulletin USENET gateway
|> X-Newsreader: vBulletin USENET gateway
|> X-Originating-IP: 200.67.68.91
|> Newsgroups: microsoft.public.windows.vista.file_management
|> NNTP-Posting-Host: 34.37.354a.static.theplanet.com 74.53.55.52
|> Lines: 1
|> Path: TK2MSFTNGHUB02.phx.gbl!TK2MSFTNGP01.phx.gbl!TK2MSFTNGP02.phx.gbl
|> Xref: TK2MSFTNGHUB02.phx.gbl
microsoft.public.windows.vista.file_management:11495
|> X-Tomcat-NG: microsoft.public.windows.vista.file_management
|>
|>
Hello everyone,
Is somebody can confirm me that I will not put my self in trouble with
the following.
Maybe for better understanding of my case please see NotePad attached
file.
Ok my first thinking was to have on DIC0 first partition (C: ) the
Paging File of Vista x64 for that I partition 25GB since I have 8GB RAM.
and second partition was for Paging Files of third OS if one day I
decide to install a Linux one.
But my lack of Computer knowledge, resulted that BOOT files of Both
actual OS installed themself on this First DISC0 partition and I do not
want to mess with them putting some more files there but I do not want
also to have 25GB partition only for Dual BOOT Files, beside this, 12GB
in second Partition for Vista x64 Paging file can be short.
So comes my thinking, how can I re-partition these 2 partitions to
leave just the enough space for the BOOT Files on Partition One of
DISC0, I was thinking 500MB _-(is_that_enough?)-_ and relocate some of
the 24.5GB on partition 2. and make a Extended Partition with the rest.
Sorry for the long reading but finally comes my doubt:
Can I copy my Dual BOOT Files to USB Stick memory, than starts any OS
setting in BIOS priority to USB Device,
_-will_my_BOOT_FILE_(USB)_work_?-_ _-and_allow_Vista_to_Load?-_
Once there I suppose:
1) I can move these partition arround,
2) Copy/Paste from USB to first small 500mb Partition all BOOT Files
again,
3) Shut down, set bios with DICS0 priority boot again and everything
will work as a charme?
Any recommendation will be very welcome.
Thnk you in advance.
+-------------------------------------------------------------------+
|Filename: Partition PC.txt |
|Download: http://vista64.net/forums/attachment.php?attachmentid=3447|
+-------------------------------------------------------------------+
--
PaxeSalute
|>