=?Utf-8?B?TmlnZWwxNjQ5NA==?=

I have done more research and found other people who cannot get this ECS
motherboard to run Vista. it runs XP Ok, I will wait and see if any BIOS
updates for this motherboard come out with respect to Vista.

"Nigel16494" wrote:

> Thanks for the reply Bill,
>
> I think my first reply here got lost, I tried all combinations of power
> setting but no luck. I am hoping someone knows what the subcodes mean on the
> 5C .
>
> -Nigel
>
> "Bill Frisbee" wrote:
>
> > Nigel,
> >
> > I have only seen this stop error (rather similar to this one) that was
> > idicitative of bad hardware, but typically with Vista the onboard controller
> > for the power savings is set to EAC which seems to play holy heck with Vista
> > installs. From your system BIOS change your power savings to either ASPI or
> > ASAPI.
> >
> > Worked on my HP workstation.
> >
> >
> > Bill F.
> >
> > "Nigel16494" <Nigel16494@discussions.microsoft.com> wrote in message
> > news:B272B177-C3DB-4D1A-A656-6C48B4C96904@microsoft.com...
> > > After Windows starts expanding the files in the installation it reboots
> > > STOP: 0x0000005C (0x0000010B,0x00000003,0x00000000,0x00000000)
> > >
> > > PC is ECS RC410L/800-MGF MB, D 945 Intel CPU, 2G Patriot PC4200, 400G SATA
> > > Seagate .
> > >
> > > The memory test provided runs clean, XP is running OK on 2 other
> > > partitions
> > > on this machine.
> > >
> > > Any ideas?
> > >
> > > p.s. It is annoying that BCDEDIT is required to switch the order of the
> > > boot
> > > back, it should have removed the SETUP default boot on the SETUP failure.
> >