Vista Forums - View Single Post

**muplayer** · 10-11-2008

Graphic card is correct slot running at 16x
I monitored pc health status in bios, and also check cPU/ Motherboard/and graphic card temperature, they on average 40C and max 57C on load.
All my settings in BIOS are in Auto or default
My case is left open there is good airflow

Did you check the minidump file i attached? it seem the same file appearing everytimethe computer freezes.

Dram voltage is at 1.7v
Cpu around 1.28 v

The freeze seem to happen when i play games

Quote: Originally Posted by Dwarf

Hi muplayer and welcome to the forums

I have had a look at the manual for your motherboard (you may need to refer to this to follow this post). You state that you are using DIMM1 and DIMM4. You should be using DIMMs1 and 3 or 2 and 4 (i.e. both blue or both white sockets). Make sure that all settings in your BIOS are set to 'Auto' and that the FSBSEL jumper is on pins 1-2 (default). Check that your graphics cards are in the correct slots.
Leave the side off your case and when you next start your system, enter the BIOS and select 'PC Health Status'. Keep an eye on this, and also keep an eye on the 'Onboard Debug LED'. If your system seems stable after 20 mins or so, reboot into Vista but don't run any programs. Again, monitor the LEDs. Next, run some programs and install other programs whilst monitoring the LEDs. Please post back with any codes shown on the LEDs and what you were doing when they appeared. If you get a code appearing whilst you are monitoring the 'PC Health Status', please enclose the readings from that as well.

10-11-2008	#6 (permalink)
muplayer Vista 32 10 posts	Re: New Computer Freeze Graphic card is correct slot running at 16x I monitored pc health status in bios, and also check cPU/ Motherboard/and graphic card temperature, they on average 40C and max 57C on load. All my settings in BIOS are in Auto or default My case is left open there is good airflow Did you check the minidump file i attached? it seem the same file appearing everytimethe computer freezes. Dram voltage is at 1.7v Cpu around 1.28 v The freeze seem to happen when i play games Quote: Originally Posted by Dwarf Hi muplayer and welcome to the forums I have had a look at the manual for your motherboard (you may need to refer to this to follow this post). You state that you are using DIMM1 and DIMM4. You should be using DIMMs1 and 3 or 2 and 4 (i.e. both blue or both white sockets). Make sure that all settings in your BIOS are set to 'Auto' and that the FSBSEL jumper is on pins 1-2 (default). Check that your graphics cards are in the correct slots. Leave the side off your case and when you next start your system, enter the BIOS and select 'PC Health Status'. Keep an eye on this, and also keep an eye on the 'Onboard Debug LED'. If your system seems stable after 20 mins or so, reboot into Vista but don't run any programs. Again, monitor the LEDs. Next, run some programs and install other programs whilst monitoring the LEDs. Please post back with any codes shown on the LEDs and what you were doing when they appeared. If you get a code appearing whilst you are monitoring the 'PC Health Status', please enclose the readings from that as well.
My System Specs