Charlie,
I treid to add more disk to same adapter but then its erroring out saying
that the location is already in use. the virtual server documentation says
you can have four adapters with 8 disk attached to each adapter. but there no
way in interface(atleast which i know) to add more disk to same adapter.
I would appreciate if you can share the knowledge on how do this. It will
help me.
Thanks,
Sameer Dhoot.
"Charlie Russel - MVP" wrote:
Quote:
> Why would you have 4 adapters??? One adapter and 4 disks is more typical.
>
> --
> Charlie.
> http://msmvps.com/blogs/xperts64
> http://mvp.support.microsoft.com/profile/charlie.russel
>
> "Chris" <chris@xxxxxx> wrote in message
> news:erSucV9KJHA.5972@xxxxxx Quote:
> > Hi Guys,
> >
> > Can i just check something with you. I have 4 virtual scsi adapters on 1
> > guest. each has scsi id 7.
> >
> > Each has a Virtual Scsi disk attached, each on Scsi id 0.
> >
> > Does this sound correct?
> >
> > "Tim Walsh" <tmwalsh@xxxxxx> wrote in message
> > news:O%233u4N6KJHA.728@xxxxxx Quote:
> >> Using VMCR-Plus, just shutdown the VM and open the settings. At the top
> >> is a SCSI options window, change it from 1 to 3, and then go in and make
> >> the changes to the SCSI addresses and share options. You still use
> >> addresses 6 and 7 for each new card. I tend to keep all the cards on one
> >> node on the same address when I build these.
> >>
> >>
> >> "Sameer Dhoot" <Sameer Dhoot@xxxxxx> wrote in message
> >> news:1EC1D854-3D22-4999-896D-40453473F6BC@xxxxxx
> >>> We are currenlty running Virtual Server R2 SP1 and wanted to configure
> >>> SQL
> >>> Server Clustering (Two nodes) which required atleast two shared drive
> >>> (quorum
> >>> and sqldata) i am able to add the quorum drive to both the nodes using
> >>> up ID
> >>> SCSI ID 6 and SCSI ID 7 for each node using shared SCSI bus option.
> >>>
> >>> How do i go about adding two more adpaters which will connect to sqldata
> >>> shared array.
> >>>
> >>
> >>
> >
> > >
>