Certainly you can add more disks. You just select SCSI ID 0 for the first
disk (that's the default), and then SCSI ID1 for the second disk, SCSI ID 2
for the third, etc. Your SCSI "Adapter" will have SCSI ID 7, and you can
connect 7 disks to each adapter.
--
Charlie.
http://msmvps.com/blogs/xperts64 http://mvp.support.microsoft.com/profile/charlie.russel
"Sameer Dhoot (http://intellects.in)"
<SameerDhoothttpintellectsin@xxxxxx> wrote in message
news:FF18ACDB-6551-47B7-8DBD-3BAF16DB756C@xxxxxx
Quote:
> Charlie,
>
> I treid to add more disk to same adapter but then its erroring out saying
> that the location is already in use. the virtual server documentation says
> you can have four adapters with 8 disk attached to each adapter. but there
> no
> way in interface(atleast which i know) to add more disk to same adapter.
>
> I would appreciate if you can share the knowledge on how do this. It will
> help me.
>
> Thanks,
> Sameer Dhoot.
>
> "Charlie Russel - MVP" wrote:
> Quote:
>> Why would you have 4 adapters??? One adapter and 4 disks is more typical.
>>
>> --
>> Charlie.
>> http://msmvps.com/blogs/xperts64
>> http://mvp.support.microsoft.com/profile/charlie.russel
>>
>> "Chris" <chris@xxxxxx> wrote in message
>> news:erSucV9KJHA.5972@xxxxxx Quote:
>> > Hi Guys,
>> >
>> > Can i just check something with you. I have 4 virtual scsi adapters on
>> > 1
>> > guest. each has scsi id 7.
>> >
>> > Each has a Virtual Scsi disk attached, each on Scsi id 0.
>> >
>> > Does this sound correct?
>> >
>> > "Tim Walsh" <tmwalsh@xxxxxx> wrote in message
>> > news:O%233u4N6KJHA.728@xxxxxx
>> >> Using VMCR-Plus, just shutdown the VM and open the settings. At the
>> >> top
>> >> is a SCSI options window, change it from 1 to 3, and then go in and
>> >> make
>> >> the changes to the SCSI addresses and share options. You still use
>> >> addresses 6 and 7 for each new card. I tend to keep all the cards on
>> >> one
>> >> node on the same address when I build these.
>> >>
>> >>
>> >> "Sameer Dhoot" <Sameer Dhoot@xxxxxx> wrote in
>> >> message
>> >> news:1EC1D854-3D22-4999-896D-40453473F6BC@xxxxxx
>> >>> We are currenlty running Virtual Server R2 SP1 and wanted to
>> >>> configure
>> >>> SQL
>> >>> Server Clustering (Two nodes) which required atleast two shared drive
>> >>> (quorum
>> >>> and sqldata) i am able to add the quorum drive to both the nodes
>> >>> using
>> >>> up ID
>> >>> SCSI ID 6 and SCSI ID 7 for each node using shared SCSI bus option.
>> >>>
>> >>> How do i go about adding two more adpaters which will connect to
>> >>> sqldata
>> >>> shared array.
>> >>>
>> >>
>> >>
>> >
>> >
>>
>>