Gary thank you for replying, I xed out the server in there. I have since
worked it out on my own, My provider was migrating to a new server and they
didn't even know what to tell since i was using windows mail. what I ended up
doing was the SMTP and POP ended up being a totally different address.
again thank you though.
"Gary VanderMolen" wrote:
Quote:
> Your settings are fine.
> That type of error is usually caused by interference from a non-
> compatible antivirus program. Which antivirus are you running?
> As a minimum, email scanning in the antivirus must be turned off,
> although that may not be sufficient to eliminate all bad effects.
> In a worst case scenario, your antivirus may need to be uninstalled.
>
> If turning off your antivirus email scanning function does not resolve
> your problem, consider upgrading to Windows Live Mail, because it
> is less prone to suffering bad effects from overly intrusive antivirus
> programs: http://get.live.com/wlmail/overview
>
> Email scanning in any antivirus must be disabled, for reasons
> explained here:
> http://thundercloud.net/infoave/tuto...ning/index.htm
>
> --
> Gary VanderMolen, MS-MVP (Mail)
>
>
> "atomblin" <atomblin@xxxxxx> wrote in message news:84AD3889-5CCF-4EC1-8078-5D1EB108806B@xxxxxx Quote:
> > The connection to the server has failed. Account: 'pop', Server:
> > 'pop.broadband.rogers.com', Protocol: POP3, Port: 110, Secure(SSL): No,
> > Socket Error: 10061, Error Number: 0x800CCC0E
> > I keep getting the same error and cant figure out what to do about it.
> >
> > "Gary VanderMolen" wrote:
> > Quote:
> >> I assume your problem is with receiving, since the error message you
> >> supplied pertains to receiving.
> >> Ports 25 and 587 do not affect receiving, since they are for sending.
> >>
> >> The error message is difficult to evaluate since you X'd out part of
> >> the server name. Perhaps the error is in the 'xxxxxxxx' part of the
> >> server name.
> >> --
> >> Gary VanderMolen, MS-MVP (Mail)
> >>
> >>
> >> "bbell121" <bbell121@xxxxxx> wrote in message news:C221B785-112D-4092-886B-15EEAD183DD4@xxxxxx
> >> >I have been getting the below error from another email on another login on
> >> > the same PC the setup STMP and POP3 work on a seperate PC but when I try
> >> > seeting up the same setting on the same PC I have two logins I get this
> >> > mesage;
> >> >
> >> > The connection to the server has failed. Account: 'Colleen', Server:
> >> > 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, Secure(SSL): No,
> >> > Socket Error: 10061, Error Number: 0x800CCC0E
> >> >
> >> > I have readt through this string and have tried most things listed
> >> > I do have Norton system works 2009 I have tried with it installed and
> >> > uninstalled as well.
> >> >
> >> > I am out of ideas???????
> >> >
> >> > I have tried port 25 (which works on another PC) but on this one it doesn't.
> >> > I have tried port 587 not working either.
> >> >
> >> > anyhelp would be greatly appreciated
> >>
> >>
> >>
>
>
>