happened just now, uploaded the minidump thanks
My Computer
System One
-
- CPU
- E5300
- Motherboard
- ECS G31T-M7
- Memory
- 2GB PC-6400 800mhz
- Graphics Card(s)
- ECS nvidia 8400gs
- Hard Drives
- 160GB SATA drive
need help with bsod
- Thread starter xmage
- Start date
Hello xmage.
Here are the results of your bugcheck.
STOP 0x00000116: VIDEO_TDR_ERROR
Usual causes: Video driver. Overheating. Bad video card. Bios. Power to card.
Probably caused by : nvlddmkm.sys
As you can see, the most likely culprit is your video card/driver.
Boot into safe mode and use this app to un-install your driver.
Reboot and install the latest driver.
Guru3D - Driver Sweeper
You will also need to check the video cards temperature, and the system temperature too.
Use this free app.
http://hwmonitor.en.softonic.com/
If anything is overclocked, set it back to default.
You can check to see if there is an update for your Bios, but only update that if nothing else works.
Do you have another card you can try ?.
It wont hurt to check your system files too, they can become damaged after a BSOD.
Open a command prompt as administrator and type sfc/scannow press enter and let it scan, if errors are found, you will need to scan again, until clean.
Hope this helps, good luck and post your results.
Here are the results of your bugcheck.
STOP 0x00000116: VIDEO_TDR_ERROR
Usual causes: Video driver. Overheating. Bad video card. Bios. Power to card.
Probably caused by : nvlddmkm.sys
As you can see, the most likely culprit is your video card/driver.
Boot into safe mode and use this app to un-install your driver.
Reboot and install the latest driver.
Guru3D - Driver Sweeper
You will also need to check the video cards temperature, and the system temperature too.
Use this free app.
http://hwmonitor.en.softonic.com/
If anything is overclocked, set it back to default.
You can check to see if there is an update for your Bios, but only update that if nothing else works.
Do you have another card you can try ?.
It wont hurt to check your system files too, they can become damaged after a BSOD.
Open a command prompt as administrator and type sfc/scannow press enter and let it scan, if errors are found, you will need to scan again, until clean.
Hope this helps, good luck and post your results.
My Computer
System One
-
- Manufacturer/Model
- Self Build
- CPU
- QX9650 (black box) [email protected]
- Motherboard
- Asus P5Q Premium
- Memory
- 8GB-4x2GB Corsair Dominator DDR 2-1066
- Graphics Card(s)
- 2 x ASUS EAH 4870 X 2 (Quad)
- Sound Card
- Supreme FX 2
- Monitor(s) Displays
- Fujitsu Siemens 22inch flat screen
- Screen Resolution
- 1680x1050
- Hard Drives
- 150 Gig WD Raptor
300 Gig Maxtor
300 Gig Maxtor, (External)
- PSU
- CoolerMaster 1000
- Case
- CoolerMaster N-Vidia stacker 830
- Cooling
- Noctua NH-U12P x 1x120mm fan, 6x120mm case fans
- Keyboard
- Logitech G15
- Mouse
- Logitech G5
- Internet Speed
- 20Mbps
- Other Info
- Audio FX Pro 5+1 gaming head set
Thanks for the helping =)i using the latest driver do i have to reinstall using Guru3D? i didnt overclock it and i dont have another card, its temperature always at 70 degree idle scanned with the sfc/scannow no errors
My Computer
System One
-
- CPU
- E5300
- Motherboard
- ECS G31T-M7
- Memory
- 2GB PC-6400 800mhz
- Graphics Card(s)
- ECS nvidia 8400gs
- Hard Drives
- 160GB SATA drive
No, just install the driver as normal.
My Computer
System One
-
- Manufacturer/Model
- Self Build
- CPU
- QX9650 (black box) [email protected]
- Motherboard
- Asus P5Q Premium
- Memory
- 8GB-4x2GB Corsair Dominator DDR 2-1066
- Graphics Card(s)
- 2 x ASUS EAH 4870 X 2 (Quad)
- Sound Card
- Supreme FX 2
- Monitor(s) Displays
- Fujitsu Siemens 22inch flat screen
- Screen Resolution
- 1680x1050
- Hard Drives
- 150 Gig WD Raptor
300 Gig Maxtor
300 Gig Maxtor, (External)
- PSU
- CoolerMaster 1000
- Case
- CoolerMaster N-Vidia stacker 830
- Cooling
- Noctua NH-U12P x 1x120mm fan, 6x120mm case fans
- Keyboard
- Logitech G15
- Mouse
- Logitech G5
- Internet Speed
- 20Mbps
- Other Info
- Audio FX Pro 5+1 gaming head set
My Computer
System One
-
- CPU
- E5300
- Motherboard
- ECS G31T-M7
- Memory
- 2GB PC-6400 800mhz
- Graphics Card(s)
- ECS nvidia 8400gs
- Hard Drives
- 160GB SATA drive