Vista - Page_fault_in_nonpaged_area stop

sportsfan7702 · 09-21-2008

PAGE_FAULT_IN_NONPAGED_AREA STOP..I got a blue screen of death with this..Its a driver issue and I cannot seem to start the pc normally. After talking to the lenovo tech person it seems that a possible premature update caused this as I cant boot...Just letting ya'll know...Matt

my specs: Lenovo IdeaCenter K Series K2.3 Pentium dual-core E2180(2.00GHz) 3GB DDR2 500GB Intel GMA 3100 Desktop with Vista Home Premium

CLFS.SYS

PAGE_FAULT_IN_NONPAGED_AREA

Then it says restart if it is the first time and to make sure hardware is
installed right.

Technical Information:

***STOP: 0x00000050 (0xFFFFF980043BF018,0x0000000000000000,
0xFFFFF9800005F511, 0x0000000000000000)

start of the error I get

**mansrm81** · 09-21-2008

try reseating your ram and video card.

**dinesh** · 09-22-2008

do not reseat anything. Just reinstalling OS will fix the issue.

**roy69** · 09-23-2008

Error message when you start a Windows Vista-based computer: "STOP: 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA"

Look at the above KB for an answer from Microsoft.

**dinesh** · 10-06-2008

Causes : The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

Solution :

Look for other hardware issues. Remove any newly installed Hardware.
Run any system diagnostics that are supplied by your computer manufacturer, especially a RAM check.
Perform a Driver Rollback if incase a driver has been updated for a particular component

**tanuj_chadha** · 10-06-2008

Reseating the ram & the video card should fix the problem. If that also doesnot fox the issue then run the diags on the complete system. And if all the diags pass then do a re-install of the operating system.

09-21-2008	#1 (permalink)
sportsfan7702 Vista Home Premium 32 Bit 4 posts	PAGE_FAULT_IN_NONPAGED_AREA STOP..I got a blue screen of death with this..Its a driver issue and I cannot seem to start the pc normally. After talking to the lenovo tech person it seems that a possible premature update caused this as I cant boot...Just letting ya'll know...Matt my specs: Lenovo IdeaCenter K Series K2.3 Pentium dual-core E2180(2.00GHz) 3GB DDR2 500GB Intel GMA 3100 Desktop with Vista Home Premium CLFS.SYS PAGE_FAULT_IN_NONPAGED_AREA Then it says restart if it is the first time and to make sure hardware is installed right. Technical Information: **STOP: 0x00000050 (0xFFFFF980043BF018,0x0000000000000000, 0xFFFFF9800005F511, 0x0000000000000000) start of the error I get Last edited by roy69; 09-23-2008 at 05:02 AM..*
My System Specs

09-21-2008	#2 (permalink)
mansrm81 Vista Ultimate 64bit SP2/ 1,863 posts	Re: Page_fault_in_nonpaged_area stop try reseating your ram and video card.
My System Specs

09-22-2008	#3 (permalink)
dinesh Windows 7 RTM 64-bit 1,266 posts	Re: Page_fault_in_nonpaged_area stop do not reseat anything. Just reinstalling OS will fix the issue. Last edited by dinesh; 09-22-2008 at 07:08 AM..
My System Specs

09-23-2008	#4 (permalink)
roy69 Vista home premium 64 bit 2,115 posts	Re: Page_fault_in_nonpaged_area stop Error message when you start a Windows Vista-based computer: "STOP: 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA" Look at the above KB for an answer from Microsoft.
My System Specs

10-06-2008	#5 (permalink)
dinesh Windows 7 RTM 64-bit 1,266 posts	Re: Page_fault_in_nonpaged_area stop Causes : The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages. Solution : Look for other hardware issues. Remove any newly installed Hardware. Run any system diagnostics that are supplied by your computer manufacturer, especially a RAM check. Perform a Driver Rollback if incase a driver has been updated for a particular component
My System Specs

10-06-2008	#6 (permalink)
tanuj_chadha Vista 32bit SP1 274 posts	Re: Page_fault_in_nonpaged_area stop Reseating the ram & the video card should fix the problem. If that also doesnot fox the issue then run the diags on the complete system. And if all the diags pass then do a re-install of the operating system.
My System Specs

Similar Threads
Thread	Forum
PAGE_FAULT_IN_NONPAGED_AREA + Winload.exe	Vista performance & maintenance
PAGE_FAULT_IN_NONPAGED_AREA + Winload.exe	.NET General
PAGE_FAULT_IN_NONPAGED_AREA + Winload.exe	Vista General
Page_fault_in_nonpaged_area acedrv.sys	Vista performance & maintenance
PAGE_FAULT_IN_NONPAGED_AREA error	Vista General