Device Manager is blank in Windows Vista ?

What the heck?

Try a repair of Vista with your disk....

~Lordbob
 

My Computer

System One

  • Manufacturer/Model
    Custom
    CPU
    Intel Core 2 Quad Q8200 2.33GHz
    Motherboard
    ASUS P5QC
    Memory
    2x2GB
    Graphics Card(s)
    NVidia GeForce 9500GT 1Gb
    Sound Card
    Mobo
    Monitor(s) Displays
    Samsung SyncMaster 206bw
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung SP2514N ATA 250Gb 7200RPM
    Samsung [Model] 1Tb 7200RPM SATA2
    PSU
    Cooler Master Real Power Pro 750W
    Keyboard
    Razer Tarantula
    Mouse
    Razer Lachesis
    Internet Speed
    not fast enough
Make sure the Plug and Play service is started. Click Here (it is applicable for vista as well)

the system account should have full permission for ENUM key in the registry...Try these steps.

You must be logged on as a local administrator to perform this task:

1. Go to "Start", "Run", and enter "regedt32"
2. Maximize the "HKEY_LOCAL_MACHINE" window.
3. Scroll down to "SYSTEM\CurrentControlSet\Enum"
4. With "Enum" selected click the "Security", "Permissions" menu.

Note: At this point you will probably notice there are no permissions on this key.

5. Click "Add".
6. Add the group "Everyone" and the user "SYSTEM".
7. Select "Everyone" and check "Read" ONLY!
8. Select "SYSTEM" and check "Full Control".
9. Click the "Advanced" button at the bottom of the window.
10. On the Advanced window check "Reset permissions on all child objects..."
11. Click "OK"
12. On the warning window click "Yes"
13. Close REGEDT32

Good luck
 

My Computer

System One

  • Manufacturer/Model
    Custom
    CPU
    AMD
    Motherboard
    ASUS
    Memory
    2GB
    Graphics Card(s)
    Nvidia 256MB
    Sound Card
    Creative 7.1
    Monitor(s) Displays
    19" Viewsonic and Sony 26" S Series TV
    Screen Resolution
    1920x1080
    Hard Drives
    Sata (1 TB) and IDE (350GB)
    Keyboard
    Multimedia (Wireless)
    Mouse
    Optical (Wireless)
    Internet Speed
    2MB
Make sure the Plug and Play service is started. Click Here (it is applicable for vista as well)

the system account should have full permission for ENUM key in the registry...Try these steps.

You must be logged on as a local administrator to perform this task:

1. Go to "Start", "Run", and enter "regedt32"
2. Maximize the "HKEY_LOCAL_MACHINE" window.
3. Scroll down to "SYSTEM\CurrentControlSet\Enum"
4. With "Enum" selected click the "Security", "Permissions" menu.

Note: At this point you will probably notice there are no permissions on this key.

5. Click "Add".
6. Add the group "Everyone" and the user "SYSTEM".
7. Select "Everyone" and check "Read" ONLY!
8. Select "SYSTEM" and check "Full Control".
9. Click the "Advanced" button at the bottom of the window.
10. On the Advanced window check "Reset permissions on all child objects..."
11. Click "OK"
12. On the warning window click "Yes"
13. Close REGEDT32

Good luck
and dont forget to back up the registry key before altering it :rolleyes:
 

My Computer

System One

  • Manufacturer/Model
    Custom Build
    CPU
    Intel Q6600 @ 2.8GHz
    Motherboard
    Evga NF78-CK-132-A 3-Way SLI
    Memory
    8Gb DDR2 Corsair Dominator @ 1066Mhz 5-5-5-15
    Graphics Card(s)
    EVGA 560 GTX SC FTW 1GB
    Sound Card
    Realtek ALC888 7.1 Audio, Logitech G35 7.1 Surround Headset
    Monitor(s) Displays
    Dell S2409W 16:9, HDMi, DVI & VGA
    Screen Resolution
    1920 x 1080
    Hard Drives
    Samsung 7200rpm 250Gb SATA,
    Samsung 7200rpm 750Gb SATA,
    WD 7200rpm 1TB SCSI SATA.
    PSU
    Xigmatek 750W Quad sli quad core 80% eff
    Case
    Antec 900 Gaming Case
    Cooling
    Zalman CNPS9700-NT NVIDIA Tritium, Dominator RAM cooler
    Keyboard
    Logitech generic keyboard
    Mouse
    Razor Lachesis Banshee V2 Blue, 4000DPI
    Internet Speed
    16Mb Sky bb
    Other Info
    Wireless Gaming Receiver for Windows, Wireless Xbox 360 Pad, Wireless Xbox 360 Les Paul Guitar
Verify also:

Start>>Search>>services.msc

And check you have service Plug and Play is started and set to AUTO

if you have different settings you have to fix it directly in registry or by using SC CONFIG command because there is no ability change settings for this service by using services.msc
 

My Computer

Back
Top