Vista - System Information

**Syru$** · 03-07-2009

Hi there

I have just recently done a full wipe of my hard-drive with Windows Vista x32 'Ultimate' on it and came across this issue in reguards of my 'RAM (Memory)' being lower than what it shows when I boot my computer up. I have 8gb RAM in which hasn't been tampered with, and ran fine before the reinstall of my OS took place and now, both System Information and Diaxlog show my RAM as *2302mb* which I am totally confused about :/

Here is my log from Diaxlog:

Code:

Operating System: Windows Vista™ Ultimate (6.0, Build 6000) (6000.vista_gdr.080917-1612)
           Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
       System Model: NFORCE 780i SLI
               BIOS: Phoenix - AwardBIOS v6.00PG
          Processor: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz (4 CPUs), ~2.7GHz
             Memory: 2302MB RAM
          Page File: 822MB used, 3989MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 10
DX Setup Parameters: Not found
     DxDiag Version: 6.00.6000.16386 32bit Unicode

Any idea what may have caused this, or even so, can it be fixed? I would really apreciate information posted rather than be sent to websites to add to the confusion haha.

Kindest Regards

**stormy13** · 03-07-2009

This pretty much sums it up,

Coding Horror: Dude, Where's My 4 Gigabytes of RAM?

BTW if you have 8 GB of ram, why aren't you running Vista x64?

**MrNeeds** · 03-07-2009

Quote: Originally Posted by Syru$

Hi there

I have just recently done a full wipe of my hard-drive with Windows Vista x32 'Ultimate' on it and came across this issue in reguards of my 'RAM (Memory)' being lower than what it shows when I boot my computer up. I have 8gb RAM in which hasn't been tampered with, and ran fine before the reinstall of my OS took place and now, both System Information and Diaxlog show my RAM as *2302mb* which I am totally confused about :/

Here is my log from Diaxlog:

Code:

Operating System: Windows Vista™ Ultimate (6.0, Build 6000) (6000.vista_gdr.080917-1612)
           Language: English (Regional Setting: English)
System Manufacturer: NVIDIA
       System Model: NFORCE 780i SLI
               BIOS: Phoenix - AwardBIOS v6.00PG
          Processor: Intel(R) Core(TM)2 Quad  CPU   Q9450  @ 2.66GHz (4 CPUs), ~2.7GHz
             Memory: 2302MB RAM
          Page File: 822MB used, 3989MB available
        Windows Dir: C:\Windows
    DirectX Version: DirectX 10
DX Setup Parameters: Not found
     DxDiag Version: 6.00.6000.16386 32bit Unicode

Any idea what may have caused this, or even so, can it be fixed? I would really apreciate information posted rather than be sent to websites to add to the confusion haha.

Kindest Regards

64-bit: More than just the RAM please read this to understand

**Syru$** · 03-07-2009

Thanks buddy, will check link to see if I can resolve the issue. x32 came with the desktop when I bought it so never really thought about x64. Is there a huge difference between them both? *New to Vista so don't really know much* lol.

**MrNeeds** · 03-07-2009

Quote: Originally Posted by Syru$

Thanks buddy, will check link to see if I can resolve the issue. x32 came with the desktop when I bought it so never really thought about x64. Is there a huge difference between them both? *New to Vista so don't really know much* lol.

that link will provide all the info you need for 64bit

**Dwarf** · 03-07-2009

Hi Syru$,

A few things in your post are confusing. Firstly, your specs say 64-bit, yet you mention 32-bit in the post. Have you got muddled up, or did your system originally have 32-bit and, if so, did you replace the 32-bit install with 64-bit? Secondly, I notice from the Build number that you haven't got SP1 installed. This important update has a lot of fixes included in it, one of which concerns the correct reporting of installed memory. Thirdly - have you installed the motherboard drivers yet?

**Syru$** · 03-07-2009

I have Windows Vista 32bit Ultimate installed on my machine. I have just noticed also that SP1 "isn't" installed where as Windows update obviously didn't download/install it to my machine. Could this be the problem? And I'm more than sure I have my motherboard driver installed :/ but even so, if I don't then the company I bought the desktop from, haven't provided me with the CD to install its drivers. This is my first time of re-installing/formatting on this machine. Would I be able to download the driver for my motherboad via the internet?

**MrNeeds** · 03-07-2009

Quote: Originally Posted by Syru$

I have Windows Vista 32bit Ultimate installed on my machine. I have just noticed also that SP1 "isn't" installed where as Windows update obviously didn't download/install it to my machine. Could this be the problem? And I'm more than sure I have my motherboard driver installed :/ but even so, if I don't then the company I bought the desktop from, haven't provided me with the CD to install its drivers. This is my first time of re-installing/formatting on this machine. Would I be able to download the driver for my motherboad via the internet?

we need information on what motherboard you own and we could point you in the right direction, but you appear to have an Nforce chipset so the correct site would be http://www.nvidia.com/object/nforce_vista_15.23.html

**Syru$** · 03-07-2009

I just checked all what came with the desktop and suprise, suprise .. no mainboard driver CD, only provided me with ..

CD1. -ASUS Graphic Card Multi-Language manual
CD2. -VGA Driver (Vista32/64 174.74WHQL)

But yeah, you was correct about my motherboard being Nforce 780i SLI which I went to the EVGA website and has the same 15.23 driver which I'm currently downloading. I have also downloaded SP1 and will install that once my mainboard driver is updated.

Will keep you posted, and I appreciate everyones help, thankyou

**Syru$** · 03-07-2009

Just a quick note that I downloade/installed SP1 & Motherboard driver and things seem to be up and running perfect now

Thankyou ever so much for your help *Beer*

03-07-2009	#1 (permalink)
Syru$ Vista Ultimate x64 10 posts	System Information Hi there I have just recently done a full wipe of my hard-drive with Windows Vista x32 'Ultimate' on it and came across this issue in reguards of my 'RAM (Memory)' being lower than what it shows when I boot my computer up. I have 8gb RAM in which hasn't been tampered with, and ran fine before the reinstall of my OS took place and now, both System Information and Diaxlog show my RAM as 2302mb which I am totally confused about :/ Here is my log from Diaxlog: Code: Operating System: Windows Vista™ Ultimate (6.0, Build 6000) (6000.vista_gdr.080917-1612) Language: English (Regional Setting: English) System Manufacturer: NVIDIA System Model: NFORCE 780i SLI BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz (4 CPUs), ~2.7GHz Memory: 2302MB RAM Page File: 822MB used, 3989MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6000.16386 32bit Unicode Any idea what may have caused this, or even so, can it be fixed? I would really apreciate information posted rather than be sent to websites to add to the confusion haha. Kindest Regards Last edited by Syru$; 03-07-2009 at 04:26 PM..
My System Specs

03-07-2009	#2 (permalink)
stormy13 Vista Ultimate x64 607 posts	Re: System Information This pretty much sums it up, Coding Horror: Dude, Where's My 4 Gigabytes of RAM? BTW if you have 8 GB of ram, why aren't you running Vista x64?
My System Specs

03-07-2009	#3 (permalink)
MrNeeds Vista Home Premium x64 1,179 posts	Re: System Information Quote: Originally Posted by Syru$ Hi there I have just recently done a full wipe of my hard-drive with Windows Vista x32 'Ultimate' on it and came across this issue in reguards of my 'RAM (Memory)' being lower than what it shows when I boot my computer up. I have 8gb RAM in which hasn't been tampered with, and ran fine before the reinstall of my OS took place and now, both System Information and Diaxlog show my RAM as 2302mb which I am totally confused about :/ Here is my log from Diaxlog: Code: Operating System: Windows Vista™ Ultimate (6.0, Build 6000) (6000.vista_gdr.080917-1612) Language: English (Regional Setting: English) System Manufacturer: NVIDIA System Model: NFORCE 780i SLI BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz (4 CPUs), ~2.7GHz Memory: 2302MB RAM Page File: 822MB used, 3989MB available Windows Dir: C:\Windows DirectX Version: DirectX 10 DX Setup Parameters: Not found DxDiag Version: 6.00.6000.16386 32bit Unicode Any idea what may have caused this, or even so, can it be fixed? I would really apreciate information posted rather than be sent to websites to add to the confusion haha. Kindest Regards 64-bit: More than just the RAM please read this to understand
My System Specs

03-07-2009	#4 (permalink)
Syru$ Vista Ultimate x64 10 posts	Re: System Information Thanks buddy, will check link to see if I can resolve the issue. x32 came with the desktop when I bought it so never really thought about x64. Is there a huge difference between them both? New to Vista so don't really know much lol.
My System Specs

03-07-2009	#5 (permalink)
MrNeeds Vista Home Premium x64 1,179 posts	Re: System Information Quote: Originally Posted by Syru$ Thanks buddy, will check link to see if I can resolve the issue. x32 came with the desktop when I bought it so never really thought about x64. Is there a huge difference between them both? New to Vista so don't really know much lol. that link will provide all the info you need for 64bit
My System Specs

03-07-2009	#6 (permalink)
Dwarf Vista Home Premium 32-bit & Vista Ultimate 64-bit both Service Pack 2 W7 Pro RTM 7600 32 & 64 2,161 posts	Re: System Information Hi Syru$, A few things in your post are confusing. Firstly, your specs say 64-bit, yet you mention 32-bit in the post. Have you got muddled up, or did your system originally have 32-bit and, if so, did you replace the 32-bit install with 64-bit? Secondly, I notice from the Build number that you haven't got SP1 installed. This important update has a lot of fixes included in it, one of which concerns the correct reporting of installed memory. Thirdly - have you installed the motherboard drivers yet?
My System Specs

03-07-2009	#7 (permalink)
Syru$ Vista Ultimate x64 10 posts	Re: System Information I have Windows Vista 32bit Ultimate installed on my machine. I have just noticed also that SP1 "isn't" installed where as Windows update obviously didn't download/install it to my machine. Could this be the problem? And I'm more than sure I have my motherboard driver installed :/ but even so, if I don't then the company I bought the desktop from, haven't provided me with the CD to install its drivers. This is my first time of re-installing/formatting on this machine. Would I be able to download the driver for my motherboad via the internet?
My System Specs

03-07-2009	#8 (permalink)
MrNeeds Vista Home Premium x64 1,179 posts	Re: System Information Quote: Originally Posted by Syru$ I have Windows Vista 32bit Ultimate installed on my machine. I have just noticed also that SP1 "isn't" installed where as Windows update obviously didn't download/install it to my machine. Could this be the problem? And I'm more than sure I have my motherboard driver installed :/ but even so, if I don't then the company I bought the desktop from, haven't provided me with the CD to install its drivers. This is my first time of re-installing/formatting on this machine. Would I be able to download the driver for my motherboad via the internet? we need information on what motherboard you own and we could point you in the right direction, but you appear to have an Nforce chipset so the correct site would be http://www.nvidia.com/object/nforce_vista_15.23.html
My System Specs

03-07-2009	#9 (permalink)
Syru$ Vista Ultimate x64 10 posts	Re: System Information I just checked all what came with the desktop and suprise, suprise .. no mainboard driver CD, only provided me with .. CD1. -ASUS Graphic Card Multi-Language manual CD2. -VGA Driver (Vista32/64 174.74WHQL) But yeah, you was correct about my motherboard being Nforce 780i SLI which I went to the EVGA website and has the same 15.23 driver which I'm currently downloading. I have also downloaded SP1 and will install that once my mainboard driver is updated. Will keep you posted, and I appreciate everyones help, thankyou
My System Specs

03-07-2009	#10 (permalink)
Syru$ Vista Ultimate x64 10 posts	Re: System Information Just a quick note that I downloade/installed SP1 & Motherboard driver and things seem to be up and running perfect now Thankyou ever so much for your help Beer
My System Specs

Similar Threads
Thread	Forum
43 GB System File in System Volume Information on 160 GB partition	Vista General
System Information - "Can't Collect Information"	Vista General
System Information	Tutorials
System Information	Vista General
Where is System Information	Vista General