Error when factory reset using (recovery disks)

Nutronium

Member
My computer stopped working and so I tried a factory reset that should make my computer like it was when I first had it. I stuck disk 1 and it worked. I then stuck disk 2 and halfway throgh it gave me an error that said something like if it happens again to contact HP.

What can I do to fix this? I then installed Linux and it worked but I want my Vista back. Thank you all so much for the help
 

My Computer

Hello Nutronium, welcome to Vista Forums!





If the factory installed recovery partition is still intact, have a look at the instructions below; I hope it helps, please remember to post back with the outcome.


HP Recovery Center

Be advised that this will take the machine back to the point when you first took it of the box.
The "HP Recovery Center" will give you the option to send to backup anything you
don't want to lose, so have backup media available to use if you choose this option.

With the machine off press the power button, as soon as you do that start tapping the F11 key.
It may take several attempts to do this, if the first attempt fails, try again.
That should take you to the HP Recovery Center. When there just follow the prompts.
It is pretty much self explanatory. From the time you boot into F11 (not counting
any backups you choose to make) you should be back on a working desktop in about
30 minutes. After it restarts just follow the prompts again to finish the process.

If your first option is system restore select no, which should take you to system recovery.
You want to try system recovery not system restore, unless you have good restore points!
 

My Computer

System One

  • Manufacturer/Model
    * BFK Customs *
    CPU
    Intel C2Q 9550 Yorkfield
    Motherboard
    ASUS P5Q Pro
    Memory
    8GB Dominator 8500C5D
    Graphics Card(s)
    XFX ATI 1GB 4870 XXX
    Sound Card
    Realtek HD 7-1
    Monitor(s) Displays
    1x 47" LCD HDMI & 2x 26" LCD HDMI
    Screen Resolution
    1920x1080P & 1920x1200
    Hard Drives
    2x 500GB 7200RPM 32MB Cache WD Caviar Black
    PSU
    Corsair 620HX
    Case
    CM Cosmos RC-1000
    Cooling
    Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
    Keyboard
    HP Enhansed Multimedia
    Mouse
    Razer Diamondback 3G
    Internet Speed
    18.6Mb/s
    Other Info
    My First Build ;)
Hi nutronium,
Have you made any changes to your partitions? if you have changed your partitions you have to set the partitions to the original state for factory recovery to recognise them.
 

My Computer

System One

  • Manufacturer/Model
    Biostar
    CPU
    AMD Athlonx64 Dual Core 3800+ 2.0GHz
    Motherboard
    Biostar MCP6P-M2
    Memory
    4GB
    Graphics Card(s)
    NVIDIA GeForce 8400GS
    Monitor(s) Displays
    CIBOX
    Screen Resolution
    1280x800
    Hard Drives
    Hitachi 160GB
To get to Windows Disk Management go to Start then right Click Computer and click Manage then click Disk management on the left hand pane

Hope This Helps,
Josh
 

My Computer

System One

  • Manufacturer/Model
    Custom Built
    CPU
    Intel Core i5 2400 @ 3.10GHz
    Motherboard
    Foxconn H67MP-S/-V/H67MP
    Memory
    8.0GB DDR3 @ 665MHz (2GBx4)
    Graphics Card(s)
    AMD HD Radeon 6870
    Sound Card
    Realtek High Definition Audio
    Monitor(s) Displays
    SMB1930NW (1440x900@60Hz)
    Screen Resolution
    1280x800
    Hard Drives
    977GB Seagate ST31000524AS ATA Device (SATA) + 250GB WD iSCSI attached Drive
    Case
    Novatech Night
    Keyboard
    Standard PS/2 Keyboard
    Mouse
    Dell HID-compliant mouse

My Computer

System One

  • Manufacturer/Model
    Biostar
    CPU
    AMD Athlonx64 Dual Core 3800+ 2.0GHz
    Motherboard
    Biostar MCP6P-M2
    Memory
    4GB
    Graphics Card(s)
    NVIDIA GeForce 8400GS
    Monitor(s) Displays
    CIBOX
    Screen Resolution
    1280x800
    Hard Drives
    Hitachi 160GB
Hello Nutronium, welcome to Vista Forums!





If the factory installed recovery partition is still intact, have a look at the instructions below; I hope it helps, please remember to post back with the outcome.


HP Recovery Center

Be advised that this will take the machine back to the point when you first took it of the box.
The "HP Recovery Center" will give you the option to send to backup anything you
don't want to lose, so have backup media available to use if you choose this option.

With the machine off press the power button, as soon as you do that start tapping the F11 key.
It may take several attempts to do this, if the first attempt fails, try again.
That should take you to the HP Recovery Center. When there just follow the prompts.
It is pretty much self explanatory. From the time you boot into F11 (not counting
any backups you choose to make) you should be back on a working desktop in about
30 minutes. After it restarts just follow the prompts again to finish the process.

If your first option is system restore select no, which should take you to system recovery.
You want to try system recovery not system restore, unless you have good restore points!



Did you try this?
 

My Computer

System One

  • Manufacturer/Model
    * BFK Customs *
    CPU
    Intel C2Q 9550 Yorkfield
    Motherboard
    ASUS P5Q Pro
    Memory
    8GB Dominator 8500C5D
    Graphics Card(s)
    XFX ATI 1GB 4870 XXX
    Sound Card
    Realtek HD 7-1
    Monitor(s) Displays
    1x 47" LCD HDMI & 2x 26" LCD HDMI
    Screen Resolution
    1920x1080P & 1920x1200
    Hard Drives
    2x 500GB 7200RPM 32MB Cache WD Caviar Black
    PSU
    Corsair 620HX
    Case
    CM Cosmos RC-1000
    Cooling
    Tuniq Tower 120, 2x 140mm and 3x 120mm case fans
    Keyboard
    HP Enhansed Multimedia
    Mouse
    Razer Diamondback 3G
    Internet Speed
    18.6Mb/s
    Other Info
    My First Build ;)
This works /\ ... I just did that very thing with one of my kid's Vista machines. :geek:
 

My Computer

System One

  • Manufacturer/Model
    Bruce ... somewhere in his 40's
    CPU
    Intel(R) Core(TM)2 Quad CPU
    Motherboard
    INTEL/D975XBX2
    Memory
    4 GB
    Graphics Card(s)
    ATI Radeon HD 2600 Pro
    Monitor(s) Displays
    Samsung SyncMaster 914v
    Screen Resolution
    1280 x 1024
    Hard Drives
    2/500GB each ... ST3500630AS ATA Device.
    One is not connected
    PSU
    Rocketfish 700 W
    Case
    G.Skill Gigabyte Chassis
    Keyboard
    Standard PS/2 Keyboard
    Mouse
    Microsoft PS/2 Mouse
    Internet Speed
    DSL
    Other Info
    ATI HDMI Audio
Oh dear, well let us know
 

My Computer

System One

  • Manufacturer/Model
    Bruce ... somewhere in his 40's
    CPU
    Intel(R) Core(TM)2 Quad CPU
    Motherboard
    INTEL/D975XBX2
    Memory
    4 GB
    Graphics Card(s)
    ATI Radeon HD 2600 Pro
    Monitor(s) Displays
    Samsung SyncMaster 914v
    Screen Resolution
    1280 x 1024
    Hard Drives
    2/500GB each ... ST3500630AS ATA Device.
    One is not connected
    PSU
    Rocketfish 700 W
    Case
    G.Skill Gigabyte Chassis
    Keyboard
    Standard PS/2 Keyboard
    Mouse
    Microsoft PS/2 Mouse
    Internet Speed
    DSL
    Other Info
    ATI HDMI Audio
Back
Top