No signal message followed by light blue blank screen

sdraza1

Member
I was getting a message of ' NO SIGNAL' off and on on my computer, I opened the computer and pressed firmly on RAM and all other connection which temporarily fixed the problem. After a while I again started haveing the NO Signal message. and after restarting it is a light blue blank screen. Can anybody help me to fix the problem. thanks
 

My Computer

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
If you can get it to work with this method, send us the BSOD report, if any

If you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.

Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
  • Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows**.
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
If you can get it to work with this method, send us the BSOD report, if any

If you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.

Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
  • Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows**.
Now i don't know whether I have 32 bit or 64 bit version. Will it be ok if I make both 32 and 64 bit version CD's and try both of them one by one. thanks
 

My Computer

Your specs (which you filled out) says 32 bit
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
If you can get it to work with this method, send us the BSOD report, if any

If you create a recovery DVD, you may be able to boot to recovery options
Create Recovery DVD

The Vista recovery disk is used to boot Vista when it won't boot - to run Startup Repair, System Restore, access a Command Line, Recover using a Vista Backup Image, etc.
System Recovery Options

If Vista will not start now, boot the Recovery CD to run Startup Repair which automates System Restore as well as numerous other tests including System File Checker which can repair system files which are not corrupted beyond repair.

If Vista still will not start, try booting into Safe Mode to run sfc /scannow to repair System files.
Special Thanks Given to Seven Forums.

Below is a bulletin distributed by MS to explain the start up procedure when Windows will not boot.
  • Startup Repair. Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows**.

Your specs (which you filled out) says 32 bit

Thanks a lot, I was able to make a recovery CD and run startup repair which however didn't help. I then tried system restore and now I could boot the computer.
After restarting I saw a window named problem reports and soloutions windows has identified, I used print screen to save this as a word file, now how can I sent it to you or what do you suggest to do so that problem doesn't occur again. thanks again
 

My Computer

Just try going back far enough with system restore to before the problem began. Try to go back 3 days before the problem
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
Just try going back far enough with system restore to before the problem began. Try to go back 3 days before the problem

Actually I restored to 7-10 days back. Start up repair test showed all tests error codes 0x0. One more thing no signal message was coming since many months off and on, what can be the cause of it and what to do for it not to recur.
 

My Computer

Usually 0x0 refers to registry. The solutions would be a system restore (which you cannot do), a repair install, have someone proficient in registry help or just reinstall.
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
Usually 0x0 refers to registry. The solutions would be a system restore (which you cannot do), a repair install, have someone proficient in registry help or just reinstall.
No I could do system restore when I used recovery disk and computer starting booting up from Hard Drive. After that I tried to get the sound from computer as it didn't have any sound since I bought it because of presumeably driver problem. I showed motherboard to a computer guy and he told me that it was of intel. I went to intel website and downloaded audio driver for windows vista and computer was restarted but now same problem recurred. that is NO SIGNAL. THIS time I have not been able to boot from recovery cd and F8 key doesnt do anything. thanks for all of your help.
 

My Computer

There is a way to restore to factory specs. Usually an f key. Every computer is different. What is your computer model and brand. We can help you go that way. If you have stuff to save we can use ubuntu to save it.

I think that this is the easiest way to go. There may be a multitude of other ways, but why not just get it working quickly, for the New Year
http://www.howtogeek.com/howto/wind...backup-files-from-your-dead-windows-computer/

When you say that you used the recovery cd. Im not sure if you mean the CD to return to factory specs or to get to repairs.
 

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
There is a way to restore to factory specs. Usually an f key. Every computer is different. What is your computer model and brand. We can help you go that way. If you have stuff to save we can use ubuntu to save it.

I think that this is the easiest way to go. There may be a multitude of other ways, but why not just get it working quickly, for the New Year
Use Ubuntu Live CD to Backup Files from Your Dead Windows Computer - How-To Geek

When you say that you used the recovery cd. Im not sure if you mean the CD to return to factory specs or to get to repairs.
It is not a branded computer. I bought it from a guy with vista already installed. Perhaps I will press F key repeatedly to restore the computer to default setting.
 

My Computer

My Computer

System One

  • Manufacturer/Model
    Dell XPS420
    Memory
    6 gig
    Graphics Card(s)
    ATI Radeon HD3650 256 MB
    Sound Card
    Intergrated 7.1 Channel Audio
    Monitor(s) Displays
    Dell SP2009W 20 inch Flat Panel w Webcam
    Hard Drives
    640 gb
    Cooling
    Fan
    Keyboard
    Dell USB
    Mouse
    Dell USB 4 button optical
    Other Info
    DSL provided by ATT
Back
Top