Am using a Vista (Dell Inspiron 1525) laptop to access a Lyncsys network and keep getting nabove message. Anyone help?
wireless association failed due to unknown reason
- Thread starter howittm
- Start date
Hi Howittm, welcome to the forums
This error is sometimes associated with the dynamic allocation of IP (DHCP) on vista where the new network system is incompatible with older routers, you could try setting a manual unused IP from the range that the router is set to issue and see if this helps. if you find that this helps have a look at the Article Here which will disable one of the new features of vista .
I would also try to connect directly (wired) to the router if possible to eliminate a basic network misconfig.
This error is sometimes associated with the dynamic allocation of IP (DHCP) on vista where the new network system is incompatible with older routers, you could try setting a manual unused IP from the range that the router is set to issue and see if this helps. if you find that this helps have a look at the Article Here which will disable one of the new features of vista .
I would also try to connect directly (wired) to the router if possible to eliminate a basic network misconfig.
My Computers
System One System Two
-
- Operating System
- Windows 10 Pro x64 Latest Release Preview
- Monitor(s) Displays
- Acer G276HL 27", (DVi) + Samsung 39" HDTV (HDMI)
- Screen Resolution
- 2 x 1920x1080 @50Hz
-
- Manufacturer/Model
- Real World Computers (Custom by Me)
- CPU
- AMD FX8350 Vishera 8 Core @4GHz
- Motherboard
- Asus M5A78L-M USB3
- Memory
- 32GB [4x8GB] DDR3 1600 MHz
- Graphics card(s)
- Asus nVidia GTX750TI-OC-2GD5 (2GB DDR5)
- Sound Card
- ASUS Xoner DG + SPDIF to 5.1 System + HDMI
- Monitor(s) Displays
- Samsung 32" TV
- Screen Resolution
- 1920 x 1080
- Hard Drives
- Internal
Crucial CT256MX100SSD1 256GB SSD,
Seagate ST2000DM001-1CH1 2TB,
External (USB3)
Seagate Backup+ Hub BK SCSI Disk 8TB
2.5/3.5 Hot Swap Cradle, USB3 + eSata (client HDDs)
NAS 4TB
- PSU
- Aerocool Templarius Imperator 750W 80+ Silver
- Case
- AeroCool X-Warrior Red Devil Tower
- Cooling
- Hyper103 CPU, Rear 120mm, Front 2x120mm, Side 2x120mm
- Internet Speed
- 68 MB Down 18.5 MB Up
- Other Info
- Six Sensor Auto / Manual Digital cooling (Fan) control with Touch control Panel
DogWarrior
New Member
I'm not an expert like the other guy there, but this is how I fixed my wireless card not connecting to my router under the association failure. Click the reset button on your router(da little black reset button) then take and load your router cd in the new laptop your having the issue with and set the router up through that laptop. Follow the steps the cd tells you too. Afterwards you should be able to connect to the unsecured router. Once you connect go into your router's configuration page online and set all your passwords, mac filter , ect.. Go around to all your other wireless puter's and connect using your new password and router name if you changed it. Remember there's no name for the router once you reset it, all you have to do is put in the password and you should be able to get to the web page.
Good luck and I hope this works for all like it did for me.
Good luck and I hope this works for all like it did for me.My Computer
System One
-
- Manufacturer/Model
- ME
- CPU
- PENTIUM D 3.2MHZ (940) OVERCLOCKED TO 3.8MHZ
- Motherboard
- XFX 680i LT
- Memory
- OCZ 2G 800MHZ
- Graphics Card(s)
- 2 XFX Nvidia 9800gt in SLI mode
- Sound Card
- REALTEC 8 CHANNEL
- Monitor(s) Displays
- 2 ACER 19" widescreens
- Screen Resolution
- to lazy to look up what i'm at right now :)
- Hard Drives
- 2 80g in raid
- PSU
- 650w
- Case
- back in black
- Cooling
- 6 fans total, anyone wana help me with liquid cooling costs?
bigmoneygrip
New Member
I logged into my NetGear WGT632 router and upgraded f/w. Then set router to use 'g only' instead of 'b and g', also set authentication to Automatic from Shared.. Vista machine connected to router.
My Computer
Hi there! I got my self a new Dell Studio 1535.
I can connect wired no probs but any wireless I cant not, I get the same msg fromt his post.
I tried two wlan and nothing.
I changed according to windows, the registry entries for dhpc and also changed 802.11 b/g to g only and still nothing.
Can someone please help! im freaking out!haaa!
I can connect wired no probs but any wireless I cant not, I get the same msg fromt his post.
I tried two wlan and nothing.
I changed according to windows, the registry entries for dhpc and also changed 802.11 b/g to g only and still nothing.
Can someone please help! im freaking out!haaa!
My Computer
System One
-
- Manufacturer/Model
- Dell Studio 1535
- CPU
- Core 2 Due T5750 2.00GHz
- Memory
- 2.00 GB
- Sound Card
- HD 5.1
- Monitor(s) Displays
- 15"
- Hard Drives
- 160 GB SATA
- Internet Speed
- ADSL
- Other Info
- Very new with Vista...