Local Only Problem. Please HELP!!!

For the last two weeks, I can't connect to the internet. It's says Local Only. When I run the diagnostic, it says...

There might be a problem with one or more netwok adapters on this computer

I tried connecting directly with my cable modem (Motorola SB4100) and I'm still having the same problem. I thought it might had something to do with Norton but it wasn't the case. I got so fustrated that i did a system recovery and yet the same problem occurs.

My current hardware are..
Hp Pavillion m7750n Desktop
Motorola Surfboard SB4100
Netgear WPN824

Windows IP Configuration
Host Name . . . . . . . . . . . . : Arnold-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
Physical Address. . . . . . . . . : 00-12-17-93-C8-90
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
Physical Address. . . . . . . . . : 00-1A-92-25-BB-E0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::65d9:ac79:6a0d:e545%8(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.229.69(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : 0.0.0.0
DHCPv6 IAID . . . . . . . . . . . : 201333394
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:169.254.229.69%17(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Disabled

Please help me with this. Thanks in advanced

Click on Start=> Run type CMD to open a command prompt.
In the command prompt type the following commands:
To Reset Reset WINSOCK entries type: netsh winsock reset catalog and press enter
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew

try Network and Sharing, link on right side, View Status,Diagnose
It may give an error message I can use.