I am unable to install powershell. I had previous version installed, which i
have uninstalled. Still i am unable to install. Here is the log file during
installation

0.171:
================================================================================
0.171: 2007/05/24 20:02:36.213 (local)
0.171: c:\d3cfe92858361f88155469eb\update\update.exe (version 6.2.29.0)
0.171: Hotfix started with following command line: /log:c:\out.txt
0.251: SOFTWARE\Microsoft\PowerShell\1\PowerShellEngine is not Present
0.251: Condition succeeded for section Prereq.CheckRegistry.Section in Line
1 of PreRequisite
0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
0.251: First Condition in Prereq.InstallRegistry.Section Succeeded
0.251: Condition succeeded for section Prereq.InstallRegistry.Section in
Line 2 of PreRequisite
0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
0.251: First Condition in Prereq.CheckLangPack.Section Succeeded
0.251: Condition succeeded for section Prereq.CheckLangPack.Section in Line
3 of PreRequisite
0.251: SOFTWARE\Microsoft\NET Framework Setup\NDP\v2.0.50727\Install is
Equal To Specified Value
0.251: Condition succeeded for section Prereq.CheckCLR.Section in Line 4 of
PreRequisite
0.261: {2DFDD440-A33C-42E4-A366-71E6CB4246A0}
{34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
0.261: MsiGetComponentPath for {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
returned INSTALLSTATE_LOCAL or INSTALLSTATE_SOURCE
0.261: Condition Check for Line 5 of PreRequisite returned FALSE
0.281: Windows PowerShell(TM) 1.0 Setup encountered an error: Cannot
install this version of the product. You must first remove any earlier
versions of Windows PowerShell(TM) 1.0 before you can install this version.
Please click OK to close the Setup Wizard. Next open the Add/Remove Programs
Control Panel, uninstall any versions of the Windows PowerShell(TM) 1.0, and
run the Windows PowerShell(TM) 1.0 setup again.
0.361: Cannot install this version of the product. You must first remove any
earlier versions of Windows PowerShell(TM) 1.0 before you can install this
version. Please click OK to close the Setup Wizard. Next open the Add/Remove
Programs Control Panel, uninstall any versions of the Windows PowerShell(TM)
1.0, and run the Windows PowerShell(TM) 1.0 setup again.
3.285: Message displayed to the user: Cannot install this version of the
product. You must first remove any earlier versions of Windows PowerShell(TM)
1.0 before you can install this version. Please click OK to close the Setup
Wizard. Next open the Add/Remove Progr
3.285: User Input: OK
3.285: Update.exe extended error code = 0xf0f4
3.285: Update.exe return code was masked to 0x643 for MSI custom action
compliance.

Any help would be appreciated.

Thanks

What OS are you trying to install on and what is the name of the exe file you
are running
--
Richard Siddaway
Please note that all scripts are supplied "as is" and with no warranty
Blog: http://richardsiddaway.spaces.live.com/
PowerShell User Group: http://www.get-psuguk.org.uk


"Naveen" wrote:

> I am unable to install powershell. I had previous version installed, which i
> have uninstalled. Still i am unable to install. Here is the log file during
> installation
>
> 0.171:
> ================================================================================
> 0.171: 2007/05/24 20:02:36.213 (local)
> 0.171: c:\d3cfe92858361f88155469eb\update\update.exe (version 6.2.29.0)
> 0.171: Hotfix started with following command line: /log:c:\out.txt
> 0.251: SOFTWARE\Microsoft\PowerShell\1\PowerShellEngine is not Present
> 0.251: Condition succeeded for section Prereq.CheckRegistry.Section in Line
> 1 of PreRequisite
> 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> 0.251: First Condition in Prereq.InstallRegistry.Section Succeeded
> 0.251: Condition succeeded for section Prereq.InstallRegistry.Section in
> Line 2 of PreRequisite
> 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> 0.251: First Condition in Prereq.CheckLangPack.Section Succeeded
> 0.251: Condition succeeded for section Prereq.CheckLangPack.Section in Line
> 3 of PreRequisite
> 0.251: SOFTWARE\Microsoft\NET Framework Setup\NDP\v2.0.50727\Install is
> Equal To Specified Value
> 0.251: Condition succeeded for section Prereq.CheckCLR.Section in Line 4 of
> PreRequisite
> 0.261: {2DFDD440-A33C-42E4-A366-71E6CB4246A0}
> {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> 0.261: MsiGetComponentPath for {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> returned INSTALLSTATE_LOCAL or INSTALLSTATE_SOURCE
> 0.261: Condition Check for Line 5 of PreRequisite returned FALSE
> 0.281: Windows PowerShell(TM) 1.0 Setup encountered an error: Cannot
> install this version of the product. You must first remove any earlier
> versions of Windows PowerShell(TM) 1.0 before you can install this version.
> Please click OK to close the Setup Wizard. Next open the Add/Remove Programs
> Control Panel, uninstall any versions of the Windows PowerShell(TM) 1.0, and
> run the Windows PowerShell(TM) 1.0 setup again.
> 0.361: Cannot install this version of the product. You must first remove any
> earlier versions of Windows PowerShell(TM) 1.0 before you can install this
> version. Please click OK to close the Setup Wizard. Next open the Add/Remove
> Programs Control Panel, uninstall any versions of the Windows PowerShell(TM)
> 1.0, and run the Windows PowerShell(TM) 1.0 setup again.
> 3.285: Message displayed to the user: Cannot install this version of the
> product. You must first remove any earlier versions of Windows PowerShell(TM)
> 1.0 before you can install this version. Please click OK to close the Setup
> Wizard. Next open the Add/Remove Progr
> 3.285: User Input: OK
> 3.285: Update.exe extended error code = 0xf0f4
> 3.285: Update.exe return code was masked to 0x643 for MSI custom action
> compliance.
>
> Any help would be appreciated.
>
> Thanks

WindowsXP-KB926139-x86-ENU.exe and OS is windows xp sp2

"RichS" wrote:

> What OS are you trying to install on and what is the name of the exe file you
> are running
> --
> Richard Siddaway
> Please note that all scripts are supplied "as is" and with no warranty
> Blog: http://richardsiddaway.spaces.live.com/
> PowerShell User Group: http://www.get-psuguk.org.uk
>
>
> "Naveen" wrote:
>
> > I am unable to install powershell. I had previous version installed, which i
> > have uninstalled. Still i am unable to install. Here is the log file during
> > installation
> >
> > 0.171:
> > ================================================================================
> > 0.171: 2007/05/24 20:02:36.213 (local)
> > 0.171: c:\d3cfe92858361f88155469eb\update\update.exe (version 6.2.29.0)
> > 0.171: Hotfix started with following command line: /log:c:\out.txt
> > 0.251: SOFTWARE\Microsoft\PowerShell\1\PowerShellEngine is not Present
> > 0.251: Condition succeeded for section Prereq.CheckRegistry.Section in Line
> > 1 of PreRequisite
> > 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> > 0.251: First Condition in Prereq.InstallRegistry.Section Succeeded
> > 0.251: Condition succeeded for section Prereq.InstallRegistry.Section in
> > Line 2 of PreRequisite
> > 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> > 0.251: First Condition in Prereq.CheckLangPack.Section Succeeded
> > 0.251: Condition succeeded for section Prereq.CheckLangPack.Section in Line
> > 3 of PreRequisite
> > 0.251: SOFTWARE\Microsoft\NET Framework Setup\NDP\v2.0.50727\Install is
> > Equal To Specified Value
> > 0.251: Condition succeeded for section Prereq.CheckCLR.Section in Line 4 of
> > PreRequisite
> > 0.261: {2DFDD440-A33C-42E4-A366-71E6CB4246A0}
> > {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> > 0.261: MsiGetComponentPath for {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> > returned INSTALLSTATE_LOCAL or INSTALLSTATE_SOURCE
> > 0.261: Condition Check for Line 5 of PreRequisite returned FALSE
> > 0.281: Windows PowerShell(TM) 1.0 Setup encountered an error: Cannot
> > install this version of the product. You must first remove any earlier
> > versions of Windows PowerShell(TM) 1.0 before you can install this version.
> > Please click OK to close the Setup Wizard. Next open the Add/Remove Programs
> > Control Panel, uninstall any versions of the Windows PowerShell(TM) 1.0, and
> > run the Windows PowerShell(TM) 1.0 setup again.
> > 0.361: Cannot install this version of the product. You must first remove any
> > earlier versions of Windows PowerShell(TM) 1.0 before you can install this
> > version. Please click OK to close the Setup Wizard. Next open the Add/Remove
> > Programs Control Panel, uninstall any versions of the Windows PowerShell(TM)
> > 1.0, and run the Windows PowerShell(TM) 1.0 setup again.
> > 3.285: Message displayed to the user: Cannot install this version of the
> > product. You must first remove any earlier versions of Windows PowerShell(TM)
> > 1.0 before you can install this version. Please click OK to close the Setup
> > Wizard. Next open the Add/Remove Progr
> > 3.285: User Input: OK
> > 3.285: Update.exe extended error code = 0xf0f4
> > 3.285: Update.exe return code was masked to 0x643 for MSI custom action
> > compliance.
> >
> > Any help would be appreciated.
> >
> > Thanks

It is possible that there is a problem with the file you downloaded. have
you tried to download a another copy and re-try the install.

Check that are are no stray bits of PowerShell left on your system - either
in the file system or the registry
--
Richard Siddaway
Please note that all scripts are supplied "as is" and with no warranty
Blog: http://richardsiddaway.spaces.live.com/
PowerShell User Group: http://www.get-psuguk.org.uk


"Naveen" wrote:

> WindowsXP-KB926139-x86-ENU.exe and OS is windows xp sp2
>
> "RichS" wrote:
>
> > What OS are you trying to install on and what is the name of the exe file you
> > are running
> > --
> > Richard Siddaway
> > Please note that all scripts are supplied "as is" and with no warranty
> > Blog: http://richardsiddaway.spaces.live.com/
> > PowerShell User Group: http://www.get-psuguk.org.uk
> >
> >
> > "Naveen" wrote:
> >
> > > I am unable to install powershell. I had previous version installed, which i
> > > have uninstalled. Still i am unable to install. Here is the log file during
> > > installation
> > >
> > > 0.171:
> > > ================================================================================
> > > 0.171: 2007/05/24 20:02:36.213 (local)
> > > 0.171: c:\d3cfe92858361f88155469eb\update\update.exe (version 6.2.29.0)
> > > 0.171: Hotfix started with following command line: /log:c:\out.txt
> > > 0.251: SOFTWARE\Microsoft\PowerShell\1\PowerShellEngine is not Present
> > > 0.251: Condition succeeded for section Prereq.CheckRegistry.Section in Line
> > > 1 of PreRequisite
> > > 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> > > 0.251: First Condition in Prereq.InstallRegistry.Section Succeeded
> > > 0.251: Condition succeeded for section Prereq.InstallRegistry.Section in
> > > Line 2 of PreRequisite
> > > 0.251: SOFTWARE\Microsoft\PowerShell\1 is not Present
> > > 0.251: First Condition in Prereq.CheckLangPack.Section Succeeded
> > > 0.251: Condition succeeded for section Prereq.CheckLangPack.Section in Line
> > > 3 of PreRequisite
> > > 0.251: SOFTWARE\Microsoft\NET Framework Setup\NDP\v2.0.50727\Install is
> > > Equal To Specified Value
> > > 0.251: Condition succeeded for section Prereq.CheckCLR.Section in Line 4 of
> > > PreRequisite
> > > 0.261: {2DFDD440-A33C-42E4-A366-71E6CB4246A0}
> > > {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> > > 0.261: MsiGetComponentPath for {34ddd58c-e1cd-4d2f-8c64-4ad7bf9b2cea}
> > > returned INSTALLSTATE_LOCAL or INSTALLSTATE_SOURCE
> > > 0.261: Condition Check for Line 5 of PreRequisite returned FALSE
> > > 0.281: Windows PowerShell(TM) 1.0 Setup encountered an error: Cannot
> > > install this version of the product. You must first remove any earlier
> > > versions of Windows PowerShell(TM) 1.0 before you can install this version.
> > > Please click OK to close the Setup Wizard. Next open the Add/Remove Programs
> > > Control Panel, uninstall any versions of the Windows PowerShell(TM) 1.0, and
> > > run the Windows PowerShell(TM) 1.0 setup again.
> > > 0.361: Cannot install this version of the product. You must first remove any
> > > earlier versions of Windows PowerShell(TM) 1.0 before you can install this
> > > version. Please click OK to close the Setup Wizard. Next open the Add/Remove
> > > Programs Control Panel, uninstall any versions of the Windows PowerShell(TM)
> > > 1.0, and run the Windows PowerShell(TM) 1.0 setup again.
> > > 3.285: Message displayed to the user: Cannot install this version of the
> > > product. You must first remove any earlier versions of Windows PowerShell(TM)
> > > 1.0 before you can install this version. Please click OK to close the Setup
> > > Wizard. Next open the Add/Remove Progr
> > > 3.285: User Input: OK
> > > 3.285: Update.exe extended error code = 0xf0f4
> > > 3.285: Update.exe return code was masked to 0x643 for MSI custom action
> > > compliance.
> > >
> > > Any help would be appreciated.
> > >
> > > Thanks