Running an SBS2003 and an additional 2000 TS server do I need the
replication enabled on the TS?
It's throwing



"Following is the summary of warnings and errors encountered by File
Replication Service while polling the Domain Controller \
\server.domain.local for FRS replica set configuration information.

Could not bind to a Domain Controller. Will try again at next polling
cycle."

If it's only a TS I reckon it shouldn't need the FRS running. Can
someone correct me if I'm wrong?
yaro

Did you make the TS a domain controller ? It is not adviced and not
necessary.

Fred


"yaro137" <yaro137@newsgroup> schreef in bericht
news:4c747d14-dd45-4567-a4f0-aa24ed528ed8@newsgroup

> Running an SBS2003 and an additional 2000 TS server do I need the
> replication enabled on the TS?
> It's throwing
>
> "Following is the summary of warnings and errors encountered by File
> Replication Service while polling the Domain Controller \
> \server.domain.local for FRS replica set configuration information.
>
> Could not bind to a Domain Controller. Will try again at next polling
> cycle."
>
> If it's only a TS I reckon it shouldn't need the FRS running. Can
> someone correct me if I'm wrong?
> yaro

On Jan 7, 6:00*pm, "Fred Blum - fill in the blanks"
<h.f.b...@newsgroup> wrote:

> Did you make the TS a domain controller ? It is not adviced and not
> necessary.
>
> Fred
>
> "yaro137" <yaro...@newsgroup> schreef in berichtnews:4c747d14-dd45-4567-a4f0-aa24ed528ed8@newsgroup
>

> > Running an SBS2003 and an additional 2000 TS server do I need the
> > replication enabled on the TS?
> > It's throwing

>

> > "Following is the summary of warnings and errors encountered by File
> > Replication Service while polling the Domain Controller \
> > \server.domain.local for FRS replica set configuration information.

>

> > Could not bind to a Domain Controller. Will try again at next polling
> > cycle."

>

> > If it's only a TS I reckon it shouldn't need the FRS running. Can
> > someone correct me if I'm wrong?
> > yaro

Its not a DC. It runs only as a terminal server. I noticed that in
other places some file member servers also run this service. Thanks
yaro

yaro137 wrote:

> On Jan 7, 6:00 pm, "Fred Blum - fill in the blanks"
> <h.f.b...@newsgroup> wrote:

>> Did you make the TS a domain controller ? It is not adviced and not
>> necessary.
>>
>> Fred
>>
>> "yaro137" <yaro...@newsgroup> schreef in
>> berichtnews:4c747d14-dd45-4567-a4f0-aa24ed528ed8@newsgroup
>>

>>> Running an SBS2003 and an additional 2000 TS server do I need the
>>> replication enabled on the TS?
>>> It's throwing

>>

>>> "Following is the summary of warnings and errors encountered by File
>>> Replication Service while polling the Domain Controller \
>>> \server.domain.local for FRS replica set configuration information.

>>

>>> Could not bind to a Domain Controller. Will try again at next
>>> polling cycle."

>>

>>> If it's only a TS I reckon it shouldn't need the FRS running. Can
>>> someone correct me if I'm wrong?
>>> yaro

>
> Its not a DC. It runs only as a terminal server. I noticed that in
> other places some file member servers also run this service. Thanks
> yaro

>> "Following is the summary of warnings and errors encountered by File
>> Replication Service while polling the Domain Controller \
>> \server.domain.local for FRS replica set configuration information.

....says that once it was a DC with a FRS replica set and likely it was rudly
and improperly forced to *not* be a DC.

A metadata cleanup would be required to remove the FRS replica for this
server.

http://technet.microsoft.com/en-us/l...78(WS.10).aspx

But *always* have a verified complete backup of AD and any server you are
working with prior to doing anything like this.

Probably should start with a dcdiag /c /v



--
/kj

On Jan 7, 8:34*pm, "kj [SBS MVP]" <KevinJ....@newsgroup>
wrote:

> yaro137 wrote:

> > On Jan 7, 6:00 pm, "Fred Blum - fill in the blanks"
> > <h.f.b...@newsgroup> wrote:

> >> Did you make the TS a domain controller ? It is not adviced and not
> >> necessary.

>

> >> Fred

>

> >> "yaro137" <yaro...@newsgroup> schreef in
> >> berichtnews:4c747d14-dd45-4567-a4f0-aa24ed528ed8@newsgroup

>

> >>> Running an SBS2003 and an additional 2000 TS server do I need the
> >>> replication enabled on the TS?
> >>> It's throwing

>

> >>> "Following is the summary of warnings and errors encountered by File
> >>> Replication Service while polling the Domain Controller \
> >>> \server.domain.local for FRS replica set configuration information.

>

> >>> Could not bind to a Domain Controller. Will try again at next
> >>> polling cycle."

>

> >>> If it's only a TS I reckon it shouldn't need the FRS running. Can
> >>> someone correct me if I'm wrong?
> >>> yaro

>

> > Its not a DC. It runs only as a terminal server. I noticed that in
> > other places some file member servers also run this service. Thanks
> > yaro

> >> "Following is the summary of warnings and errors encountered by File
> >> Replication Service while polling the Domain Controller \
> >> \server.domain.local for FRS replica set configuration information.

>
> ...says that once it was a DC with a FRS replica set and likely it was rudly
> and improperly forced to *not* be a DC.
>
> A metadata cleanup would be required to remove the FRS replica for this
> server.
>
> http://technet.microsoft.com/en-us/l...78(WS.10).aspx
>
> But *always* have a verified complete backup of AD and any server you are
> working with prior to doing anything like this.
>
> Probably should start with a dcdiag /c /v
>
> --
> /kj

Thanks kj I'll try that.
yaro

On Jan 8, 10:31*am, yaro137 <yaro...@newsgroup> wrote:

> On Jan 7, 8:34*pm, "kj [SBS MVP]" <KevinJ....@newsgroup>
> wrote:
>
>
>

> > yaro137 wrote:

> > > On Jan 7, 6:00 pm, "Fred Blum - fill in the blanks"
> > > <h.f.b...@newsgroup> wrote:
> > >> Did you make the TS a domain controller ? It is not adviced and not
> > >> necessary.

>

> > >> Fred

>

> > >> "yaro137" <yaro...@newsgroup> schreef in
> > >> berichtnews:4c747d14-dd45-4567-a4f0-aa24ed528ed8@newsgroup

>

> > >>> Running an SBS2003 and an additional 2000 TS server do I need the
> > >>> replication enabled on the TS?
> > >>> It's throwing

>

> > >>> "Following is the summary of warnings and errors encountered by File
> > >>> Replication Service while polling the Domain Controller \
> > >>> \server.domain.local for FRS replica set configuration information.

>

> > >>> Could not bind to a Domain Controller. Will try again at next
> > >>> polling cycle."

>

> > >>> If it's only a TS I reckon it shouldn't need the FRS running. Can
> > >>> someone correct me if I'm wrong?
> > >>> yaro

>

> > > Its not a DC. It runs only as a terminal server. I noticed that in
> > > other places some file member servers also run this service. Thanks
> > > yaro
> > >> "Following is the summary of warnings and errors encountered by File
> > >> Replication Service while polling the Domain Controller \
> > >> \server.domain.local for FRS replica set configuration information.

>

> > ...says that once it was a DC with a FRS replica set and likely it was rudly
> > and improperly forced to *not* be a DC.

>

> > A metadata cleanup would be required to remove the FRS replica for this
> > server.

>

> >http://technet.microsoft.com/en-us/l...78(WS.10).aspx

>

> > But *always* have a verified complete backup of AD and any server you are
> > working with prior to doing anything like this.

>

> > Probably should start with a dcdiag /c /v

>

> > --
> > /kj

>
> Thanks kj I'll try that.
> yaro

As to the dcdiag command, I won't be able to run it on that server as
it's not a DC.
yaro

"yaro137" <yaro137@newsgroup> wrote in message
news:e794a477-3f4f-4829-af6a-072ec3d1670b@newsgroup

>

> > A metadata cleanup would be required to remove the FRS replica for this
> > server.

>

> >http://technet.microsoft.com/en-us/l...78(WS.10).aspx

>

> > But *always* have a verified complete backup of AD and any server you
> > are
> > working with prior to doing anything like this.

>

> > Probably should start with a dcdiag /c /v

>

> > --
> > /kj

>
> Thanks kj I'll try that.
> yaro

> As to the dcdiag command, I won't be able to run it on that server as
> it's not a DC.
> yaro

He meant to run it on the SBS. :-)


--
Ace

This posting is provided "AS-IS" with no warranties or guarantees and
confers no rights.

Please reply back to the newsgroup or forum for collaboration benefit among
responding engineers, and to help others benefit from your resolution.

Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE &
MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services

If you feel this is an urgent issue and require immediate assistance, please
contact Microsoft PSS directly. Please check http://support.microsoft.com
for regional support phone numbers.

On Jan 8, 3:28*pm, "Ace Fekay [MVP-DS, MCT]"
<ace...@newsgroup> wrote:

> "yaro137" <yaro...@newsgroup> wrote in message
>
> news:e794a477-3f4f-4829-af6a-072ec3d1670b@newsgroup
>
>
>
>
>

> > > A metadata cleanup would be required to remove the FRS replica for this
> > > server.

>

> > >http://technet.microsoft.com/en-us/l...78(WS.10).aspx

>

> > > But *always* have a verified complete backup of AD and any server you
> > > are
> > > working with prior to doing anything like this.

>

> > > Probably should start with a dcdiag /c /v

>

> > > --
> > > /kj

>

> > Thanks kj I'll try that.
> > yaro
> > As to the dcdiag command, I won't be able to run it on that server as
> > it's not a DC.
> > yaro

>
> He meant to run it on the SBS. :-)
>
> --
> Ace
>
> This posting is provided "AS-IS" with no warranties or guarantees and
> confers no rights.
>
> Please reply back to the newsgroup or forum for collaboration benefit among
> responding engineers, and to help others benefit from your resolution.
>
> Ace Fekay, MVP, MCT, MCITP EA, MCTS Windows 2008 & Exchange 2007, MCSE &
> MCSA 2003/2000, MCSA Messaging 2003
> Microsoft Certified Trainer
> Microsoft MVP - Directory Services
>
> If you feel this is an urgent issue and require immediate assistance, please
> contact Microsoft PSS directly. Please checkhttp://support.microsoft.com
> for regional support phone numbers.

Oh so that's the thing. Thanks Ace
yaro