Windows Vista Forums
Vista Forums Home Join Vista Forums Windows 7 Forum Vista Tutorials Tags
Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks.

Go Back   Vista Forums > Misc Newsgroups > Virtual PC

Vista - Unable to access Internet or network with Virtual PC 2007

Reply
 
Old 10-28-2008   #1 (permalink)
bqpryor


 
 

Unable to access Internet or network with Virtual PC 2007

I have successfully installed Virtual PC (Vista Business) on my host computer
(also Vista Business). I am unable to access the Internet. On the host PC,
I installed (and enabled) Virtual Machine Network Services on my NIC. under
the Sharing tab for the NIC I checked both boxes, "Allow other network users
to connect through this computer's Internet connection" and "Allow other
network users to control or disable the shared Internet connection." I also
checked "HTTP" and "HTTPS" on the ICS Settings button on the Sharing tab. I
installed Microsoft Loopback Adapter as a second Internet connection,
installing and enabling Virtual Machine Network Services on that adapter as
well. I have tried static and dynamic IP addresses with IPv4 with no
success- I am currently set to static. On the VM settings, if I use NAT as
the adapter, I can see the emulated Intel NIC, and the guest PC reports that
it can access a network, though the only device in the network is the guest
PC. It reports that it cannot connect to the Internet from the network. If
I use my host PC’s NIC as the adapter in the VM settings, I get a message
that reads “The network adapter with address "00:00:00:00:00:00" of virtual
machine "Vista Business VM1" failed to initialize because the address is a
null address.” When I start up the VM. When I look at the connection, it
shows that the guest PC is not connected to the Internet, with no network
between the guest PC and the Internet. I am a home user and I am trying to
set up Virtual PC for educational purposes, so a basic setup would be
adequate.


My System SpecsSystem Spec
Old 10-29-2008   #2 (permalink)
Melelina


 
 

Re: Unable to access Internet or network with Virtual PC 2007


"bqpryor" <bqpryor@xxxxxx> wrote in message
news:CBDAF1E3-DBDB-4010-B080-2806D9543479@xxxxxx
Quote:

>I have successfully installed Virtual PC (Vista Business) on my host
>computer
> (also Vista Business). I am unable to access the Internet. On the host
> PC,
> I installed (and enabled) Virtual Machine Network Services on my NIC.
> under
> the Sharing tab for the NIC I checked both boxes, "Allow other network
> users
> to connect through this computer's Internet connection" and "Allow other
> network users to control or disable the shared Internet connection." I
> also
> checked "HTTP" and "HTTPS" on the ICS Settings button on the Sharing tab.
> I
> installed Microsoft Loopback Adapter as a second Internet connection,
> installing and enabling Virtual Machine Network Services on that adapter
> as
> well. I have tried static and dynamic IP addresses with IPv4 with no
> success- I am currently set to static. On the VM settings, if I use NAT
> as
> the adapter, I can see the emulated Intel NIC, and the guest PC reports
> that
> it can access a network, though the only device in the network is the
> guest
> PC. It reports that it cannot connect to the Internet from the network.
> If
> I use my host PC's NIC as the adapter in the VM settings, I get a message
> that reads "The network adapter with address "00:00:00:00:00:00" of
> virtual
> machine "Vista Business VM1" failed to initialize because the address is a
> null address." When I start up the VM. When I look at the connection, it
> shows that the guest PC is not connected to the Internet, with no network
> between the guest PC and the Internet. I am a home user and I am trying
> to
> set up Virtual PC for educational purposes, so a basic setup would be
> adequate.
>
I take it that you don't have a router?


My System SpecsSystem Spec
Old 10-29-2008   #3 (permalink)
Bill Grant


 
 

Re: Unable to access Internet or network with Virtual PC 2007



"bqpryor" <bqpryor@xxxxxx> wrote in message
news:CBDAF1E3-DBDB-4010-B080-2806D9543479@xxxxxx
Quote:

> I have successfully installed Virtual PC (Vista Business) on my host
> computer
> (also Vista Business). I am unable to access the Internet. On the host
> PC,
> I installed (and enabled) Virtual Machine Network Services on my NIC.
> under
> the Sharing tab for the NIC I checked both boxes, "Allow other network
> users
> to connect through this computer's Internet connection" and "Allow other
> network users to control or disable the shared Internet connection." I
> also
> checked "HTTP" and "HTTPS" on the ICS Settings button on the Sharing tab.
> I
> installed Microsoft Loopback Adapter as a second Internet connection,
> installing and enabling Virtual Machine Network Services on that adapter
> as
> well. I have tried static and dynamic IP addresses with IPv4 with no
> success- I am currently set to static. On the VM settings, if I use NAT
> as
> the adapter, I can see the emulated Intel NIC, and the guest PC reports
> that
> it can access a network, though the only device in the network is the
> guest
> PC. It reports that it cannot connect to the Internet from the network.
> If
> I use my host PC’s NIC as the adapter in the VM settings, I get a message
> that reads “The network adapter with address "00:00:00:00:00:00" of
> virtual
> machine "Vista Business VM1" failed to initialize because the address is a
> null address.” When I start up the VM. When I look at the connection, it
> shows that the guest PC is not connected to the Internet, with no network
> between the guest PC and the Internet. I am a home user and I am trying
> to
> set up Virtual PC for educational purposes, so a basic setup would be
> adequate.
>
Have a look at this post in Ben's blog,

http://blogs.msdn.com/virtual_pc_guy...17/354971.aspx


My System SpecsSystem Spec
Old 10-29-2008   #4 (permalink)
bqpryor


 
 

Re: Unable to access Internet or network with Virtual PC 2007

I do have a Linksys wireless router WRTP54G, but Bill Grant's response to my
question pointed me in the correct direction for solving the problem. Thanks
for your response.

"Melelina" wrote:
Quote:

>
> "bqpryor" <bqpryor@xxxxxx> wrote in message
> news:CBDAF1E3-DBDB-4010-B080-2806D9543479@xxxxxx
Quote:

> >I have successfully installed Virtual PC (Vista Business) on my host
> >computer
> > (also Vista Business). I am unable to access the Internet. On the host
> > PC,
> > I installed (and enabled) Virtual Machine Network Services on my NIC.
> > under
> > the Sharing tab for the NIC I checked both boxes, "Allow other network
> > users
> > to connect through this computer's Internet connection" and "Allow other
> > network users to control or disable the shared Internet connection." I
> > also
> > checked "HTTP" and "HTTPS" on the ICS Settings button on the Sharing tab.
> > I
> > installed Microsoft Loopback Adapter as a second Internet connection,
> > installing and enabling Virtual Machine Network Services on that adapter
> > as
> > well. I have tried static and dynamic IP addresses with IPv4 with no
> > success- I am currently set to static. On the VM settings, if I use NAT
> > as
> > the adapter, I can see the emulated Intel NIC, and the guest PC reports
> > that
> > it can access a network, though the only device in the network is the
> > guest
> > PC. It reports that it cannot connect to the Internet from the network.
> > If
> > I use my host PC's NIC as the adapter in the VM settings, I get a message
> > that reads "The network adapter with address "00:00:00:00:00:00" of
> > virtual
> > machine "Vista Business VM1" failed to initialize because the address is a
> > null address." When I start up the VM. When I look at the connection, it
> > shows that the guest PC is not connected to the Internet, with no network
> > between the guest PC and the Internet. I am a home user and I am trying
> > to
> > set up Virtual PC for educational purposes, so a basic setup would be
> > adequate.
> >
>
> I take it that you don't have a router?
>
>
>
My System SpecsSystem Spec
Reply

Thread Tools


Similar Threads
Thread Forum
Win 3.11 WfW Internet Under Virtual PC 2007? How to do? Virtual PC
Virtual PC 2007 can't see Network SQL Servers Virtual PC
installing Virtual PC 2004 or 2007 eliminiating internet connectio PowerShell
Network access in virtual pc 2007 Vista General
Virtual PC 2007 does not connect to internet Vista General


Vista Forums is an independent web site and has not been authorized,
sponsored, or otherwise approved by Microsoft Corporation.
"Windows Vista", the Start Orb, and related materials are trademarks of Microsoft Corp.
Designer Media Ltd

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46