Vista - Re: Converting real hard drive to vhd file

Windows 98 is both easier and harder to transfer to a VM, it's harder
because none of the current PtoV products support it.

Remember that none of the hardware is going to be the same, so getting
it to boot might be a problem, but what you need to end up doing is
create a VHD and VM, boot it with a Win98 boot floppy, FDISK, FORMAT
the virtual hard drive with the /S switch to copy the boot files, then
shut it down. Then you need to use a product like Win image to copy
*all* the files on the original PC's hard drive into the VM, with the
directory structure intact.

Then you just boot the VM again and hopefully it detects all the
hardware correctly and boots. Then if it does, install the VPC
additions and you're good to go.

--
Bob Comer



On Tue, 4 Aug 2009 17:44:05 +0100, "Michael Chare"
<MunderscoreNEWS@xxxxxx> wrote:

"Robert Comer" <bobcomer-removeme-@xxxxxx> wrote in message
news:fufh751ee9247u0rme7e786bvmdmt1hkd6@xxxxxx

Thanks, I will give Win Image a try.

--
Michael Chare