Vista - Abit An-7 no sound?

Just installed Vista on this mobo but get no sound at all? Downloaded
what I thought were the correct RealTek drivers, device manager shows
it working fine BUT I still don't get any sound at all!!

Anybody got this working?



cheers,
Len

Do you mean an A7N motherboard?

--

Regards,

Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)



"Len Cuff" <len.cuff@xxxxxx> wrote in message
news:qv17i3hsuoimji2oena7cqo1nh21dkbs6e@xxxxxx

"Len Cuff" <len.cuff@xxxxxx> wrote in message
news:qv17i3hsuoimji2oena7cqo1nh21dkbs6e@xxxxxxNVIDIA is not supporting the NForce 2 chipset for Vista. That could be your
problem.

On Sat, 27 Oct 2007 18:49:38 GMT, Len Cuff <len.cuff@xxxxxx>
wrote:
Well I downloaded the Vista drivers but still nothing UNTIL I tried
moving the connection! Seems I have sound but from one of the other
connections - there are 5 to choose from on this mobo!

cheers,
Len

pvdg42 wrote:
Probably not much of an idea but you have tried all the sockets on the
board for output, I had an Asus MB and one set of drivers had the output
and input sockets the wrong way around

Len Cuff wrote:
Ha, so I was a bit late then, oh well, good luck with the rest of the
day experimenting what comes out and goes in where then

I have Vista Ultimate installed on two Asus A7N8X 2.0 Deluxe M/B. Works
fairly nice.

Sound is good using the drivers obtained from Windows Update on the first
boot into the desktop. I also had problems with the mini plug connector on
the rear of the M/B. A quick squirt of WD-40 on the plug, and about 5-6
insert/removal cycles solved the problem for me. The connectors become
oxidized and have to be cleaned, especially if the connectors have been
plugged in for a couple of years.

--

Regards,

Richard Urban
Microsoft MVP Windows Shell/User
(For email, remove the obvious from my address)



"Len Cuff" <len.cuff@xxxxxx> wrote in message
newse57i3dsk9ct1opggs8g4cpefo51gjr5g7@xxxxxx

On Sat, 27 Oct 2007 18:49:38 GMT, Len Cuff <len.cuff@xxxxxx>
wrote:
Gave up in the end as all I could get was very 'echoy' sound! Slapped
in an old PCI Soundblaster card and it installed and is working fine!



cheers,
Len