Hope that this does not post twice......

Having received Vista Beta 2 Kit from Microsoft, I have not seen any
information on when RC1 CCP Kit will be shipped.. It was my understanding
that I would receive RC1 from them since I ordered Beta 2 Kit....


Any info would be greatly appreciated.....

I would advise you to read a bit in this group.
Your question has been answered many times.
You will get an email with your original key and a download link plus the
info on when you will receive the kit if ordered.
Paula

"retired fire" <retiredfire@discussions.microsoft.com> wrote in message
news:6F355BE3-62CF-4264-AA88-F8971BE73357@microsoft.com...
> Hope that this does not post twice......
>
> Having received Vista Beta 2 Kit from Microsoft, I have not seen any
> information on when RC1 CCP Kit will be shipped.. It was my understanding
> that I would receive RC1 from them since I ordered Beta 2 Kit....
>
>
> Any info would be greatly appreciated.....

Thank for the info...I have seen no info about Microsoft shipping Cpp Kit on
this site, nor on Microsoft sites anywhere.... only discussion on
downloading and burning DVD's... I have not received any e-mails about
this....

Thanks again for the info...

"Paula" wrote:

> I would advise you to read a bit in this group.
> Your question has been answered many times.
> You will get an email with your original key and a download link plus the
> info on when you will receive the kit if ordered.
> Paula
>
> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
> news:6F355BE3-62CF-4264-AA88-F8971BE73357@microsoft.com...
> > Hope that this does not post twice......
> >
> > Having received Vista Beta 2 Kit from Microsoft, I have not seen any
> > information on when RC1 CCP Kit will be shipped.. It was my understanding
> > that I would receive RC1 from them since I ordered Beta 2 Kit....
> >
> >
> > Any info would be greatly appreciated.....
>
>
>

"retired fire" <retiredfire@discussions.microsoft.com> wrote in message
news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
> Thank for the info...I have seen no info about Microsoft shipping Cpp Kit
> on
> this site, nor on Microsoft sites anywhere.... only discussion on
> downloading and burning DVD's... I have not received any e-mails about
> this....

That's because CPP hasn't got RC1 yet. When we do, you'll get the email
soon. That the way it has worked with other stuff anyways...

TaK

Thanks for the info...finally someone who answered my question without being
rude...

"Raven Mill" wrote:

> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
> news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
> > Thank for the info...I have seen no info about Microsoft shipping Cpp Kit
> > on
> > this site, nor on Microsoft sites anywhere.... only discussion on
> > downloading and burning DVD's... I have not received any e-mails about
> > this....
>
> That's because CPP hasn't got RC1 yet. When we do, you'll get the email
> soon. That the way it has worked with other stuff anyways...
>
> TaK
>
>
>

CPP got access to RC1 yesterday

--
Jane, not plain 64 bit enabled
Batteries not included. Braincell on vacation :-)
"Raven Mill" <nospammingdammit> wrote in message
news:%23Psvejr0GHA.1300@TK2MSFTNGP05.phx.gbl...
> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
> news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
>> Thank for the info...I have seen no info about Microsoft shipping Cpp Kit
>> on
>> this site, nor on Microsoft sites anywhere.... only discussion on
>> downloading and burning DVD's... I have not received any e-mails about
>> this....
>
> That's because CPP hasn't got RC1 yet. When we do, you'll get the email
> soon. That the way it has worked with other stuff anyways...
>
> TaK
>
>

Actually, Microsofts website states that RC1 is available for CPP and that
you should have recived an e-mail in Early Sept. If you were part of the CPP
program from June Or beta 2. However I did not recive this email so I called
Microsoft and was told that the website is not correct, and that currently
it is only available to MSDN and TECHNET. But should be available soon. Go
figure, leave it to MS to post saying that it is available and then not make
it available, and then say ooops our site is wrong but lets not fix it. lol
"Jane C" <jellybean@nospam.xjgarage.org> wrote in message
news:FFFA64FD-782E-4D82-9382-A5B9E70FD01C@microsoft.com...
> CPP got access to RC1 yesterday
>
> --
> Jane, not plain 64 bit enabled
> Batteries not included. Braincell on vacation :-)
> "Raven Mill" <nospammingdammit> wrote in message
> news:%23Psvejr0GHA.1300@TK2MSFTNGP05.phx.gbl...
>> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
>> news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
>>> Thank for the info...I have seen no info about Microsoft shipping Cpp
>>> Kit on
>>> this site, nor on Microsoft sites anywhere.... only discussion on
>>> downloading and burning DVD's... I have not received any e-mails about
>>> this....
>>
>> That's because CPP hasn't got RC1 yet. When we do, you'll get the email
>> soon. That the way it has worked with other stuff anyways...
>>
>> TaK
>>
>>
>

Microsoft has already started sending out the emails. I received mine
yesterday. It's actually the wording about sending out the emails that is
incorrect. It should really state 'We are currently in the process of
sending out emails to CPP participants.' Whoever wrote it needs a prod ;-)
Funny thing is, the download was available for CPP folk before it got to
MSDN and Technet!!

In the coming weeks we have heard that Microsoft will open RC1 to new
registrations. That might have been what was confusing whoever you spoke to
at Microsoft.

--
Jane, not plain 64 bit enabled
Batteries not included. Braincell on vacation :-)

"Joshua Elwell" <elwellj@gmail.com> wrote in message
news:25C101F9-6E33-4BB4-BAD3-CB7BB7580680@microsoft.com...
> Actually, Microsofts website states that RC1 is available for CPP and that
> you should have recived an e-mail in Early Sept. If you were part of the
> CPP program from June Or beta 2. However I did not recive this email so I
> called Microsoft and was told that the website is not correct, and that
> currently it is only available to MSDN and TECHNET. But should be
> available soon. Go figure, leave it to MS to post saying that it is
> available and then not make it available, and then say ooops our site is
> wrong but lets not fix it. lol
> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
> news:FFFA64FD-782E-4D82-9382-A5B9E70FD01C@microsoft.com...
>> CPP got access to RC1 yesterday
>>
>> --
>> Jane, not plain 64 bit enabled
>> Batteries not included. Braincell on vacation :-)
>> "Raven Mill" <nospammingdammit> wrote in message
>> news:%23Psvejr0GHA.1300@TK2MSFTNGP05.phx.gbl...
>>> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
>>> news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
>>>> Thank for the info...I have seen no info about Microsoft shipping Cpp
>>>> Kit on
>>>> this site, nor on Microsoft sites anywhere.... only discussion on
>>>> downloading and burning DVD's... I have not received any e-mails about
>>>> this....
>>>
>>> That's because CPP hasn't got RC1 yet. When we do, you'll get the email
>>> soon. That the way it has worked with other stuff anyways...
>>>
>>> TaK
>>>
>>>
>>
>

Pretty funny though. :-) I did follow the link and have the RC1 and used the
Beta 2 key that I was given and it worked great.

Thanks for the response.

"Jane C" <jellybean@nospam.xjgarage.org> wrote in message
news:21E86790-78B3-42FD-96C9-D5A4D9565DAF@microsoft.com...
> Microsoft has already started sending out the emails. I received mine
> yesterday. It's actually the wording about sending out the emails that is
> incorrect. It should really state 'We are currently in the process of
> sending out emails to CPP participants.' Whoever wrote it needs a prod
> ;-) Funny thing is, the download was available for CPP folk before it got
> to MSDN and Technet!!
>
> In the coming weeks we have heard that Microsoft will open RC1 to new
> registrations. That might have been what was confusing whoever you spoke
> to at Microsoft.
>
> --
> Jane, not plain 64 bit enabled
> Batteries not included. Braincell on vacation :-)
>
> "Joshua Elwell" <elwellj@gmail.com> wrote in message
> news:25C101F9-6E33-4BB4-BAD3-CB7BB7580680@microsoft.com...
>> Actually, Microsofts website states that RC1 is available for CPP and
>> that you should have recived an e-mail in Early Sept. If you were part of
>> the CPP program from June Or beta 2. However I did not recive this email
>> so I called Microsoft and was told that the website is not correct, and
>> that currently it is only available to MSDN and TECHNET. But should be
>> available soon. Go figure, leave it to MS to post saying that it is
>> available and then not make it available, and then say ooops our site is
>> wrong but lets not fix it. lol
>> "Jane C" <jellybean@nospam.xjgarage.org> wrote in message
>> news:FFFA64FD-782E-4D82-9382-A5B9E70FD01C@microsoft.com...
>>> CPP got access to RC1 yesterday
>>>
>>> --
>>> Jane, not plain 64 bit enabled
>>> Batteries not included. Braincell on vacation :-)
>>> "Raven Mill" <nospammingdammit> wrote in message
>>> news:%23Psvejr0GHA.1300@TK2MSFTNGP05.phx.gbl...
>>>> "retired fire" <retiredfire@discussions.microsoft.com> wrote in message
>>>> news:50CC7627-3701-4A6B-A99E-DBA61588C712@microsoft.com...
>>>>> Thank for the info...I have seen no info about Microsoft shipping Cpp
>>>>> Kit on
>>>>> this site, nor on Microsoft sites anywhere.... only discussion on
>>>>> downloading and burning DVD's... I have not received any e-mails
>>>>> about
>>>>> this....
>>>>
>>>> That's because CPP hasn't got RC1 yet. When we do, you'll get the
>>>> email soon. That the way it has worked with other stuff anyways...
>>>>
>>>> TaK
>>>>
>>>>
>>>
>>
>