Vista - Vista RC1 - Clean Installation: "Completing Installation" exceptio

I've made 3 attempts to install vista rc1 (build 5600) last night from a
clean machine (See specs below.) After entering my product key, vista starts
copying and extracting files, reboots, etc...
Finally about 2 and a half minutes into the "Completing Installation"
section of the installation the computer restarts and it asks me if I want to
boot vista normally, safemode etc... If I boot into vista at this point it
tells me that setup had stopped unexpectedly, and that I would need to
restart installation. I've tried installing on all 3 devices.

Previously I was successful at installing beta2 on the WD 40Gb dual booting
with xp. I had another issue with vista booting to it about a month after
installation which is most likely unrelated. This time I am doing a clean
install, all 3 drives are formatted and no other harddrives exist in the
machine.

Any ideas?




CPU: Athlon XP 3000+ (333Mhz FSB)
Memory: 1024Mb PC3200 @ DDR333 OCZ
512Mb PC3200 @ DDR333 Mushkin
Video: ATI Radeon 9600 Pro 8x AGP
Chipset: VIA KT400
Motherboard: Soyo Dragon KT400 Ultra Plantinum Ed.
Audio: Sound Blaster Audigy2 ZS
IDE 1: 40GB Western Digital Caviar 7200 IDE ATA100
IDE 2: 80GB Western Digital Caviar 7200 IDE ATA100
IDE 3: 60GB Maxtor 7200 IDE ATA133

"Jonathan MacCollum" <JonathanMacCollum@discussions.microsoft.com> wrote in
message news0760CBE-D877-4EB8-8698-F9BCCF381534@microsoft.com...
> I've made 3 attempts to install vista rc1 (build 5600) last night from a
> clean machine (See specs below.) After entering my product key, vista
> starts
> copying and extracting files, reboots, etc...
> Finally about 2 and a half minutes into the "Completing Installation"
> section of the installation the computer restarts and it asks me if I want
> to
> boot vista normally, safemode etc... If I boot into vista at this point
> it
> tells me that setup had stopped unexpectedly, and that I would need to
> restart installation. I've tried installing on all 3 devices.
>
> Previously I was successful at installing beta2 on the WD 40Gb dual
> booting
> with xp. I had another issue with vista booting to it about a month after
> installation which is most likely unrelated. This time I am doing a clean
> install, all 3 drives are formatted and no other harddrives exist in the
> machine.
>
> Any ideas?


I'd guess a bad burn of the ISO or a bad download.

--
Frank Saunders, MS-MVP OE/WM
http://www.fjsmjs.com
Answer in newsgroup. Don't send mail.

I ran the MD5 check on the checksum and it worked successfully.
I will attempt a re-burn shortly. It would be nice to include a 'disk
checker' utility on the bootable setup that will check to make sure there are
no errors on the disk itself like the Ubuntu live cd has. We won't go into
issues with that OS here tho.

Thanks

Nero has a verification step after the burn. I always select it to make
sure I got a good burn. If your burner doesn't have some kind of
verification, be sure to burn at the slowest speed to give yourself the best
chance of getting a good burn.

Todd

"Jonathan MacCollum" <JonathanMacCollum@discussions.microsoft.com> wrote in
message news:8DB68126-71E8-4AA0-AF16-091F4135E33F@microsoft.com...
> I ran the MD5 check on the checksum and it worked successfully.
> I will attempt a re-burn shortly. It would be nice to include a 'disk
> checker' utility on the bootable setup that will check to make sure there
are
> no errors on the disk itself like the Ubuntu live cd has. We won't go
into
> issues with that OS here tho.
>
> Thanks

Thanks Todd...
I usually check this box before burning, but can't recall if I did this time
or now.

However, I just used the same dvd I used to install it at the time mentioned
above on a VM on a separate computer without any problems. Not sure why it
works on this box and not on the other box.

Is there anyway to compare a disk to an image after its been burned like you
mentioned with nero, after the burning session has been completed? I want to
make sure it is infact the media before I burn it again. (My delima here is
my burner is on the computer which is now completely formatted, and this new
box with the vm has no dvd burner. So, I would have to reinstall xp on that
box plus burning software.)

Thanks!

I also ran the installation of beta2 on that machine without error, and tried
the upgrade path to rc1 with a little more helpful information about the
problem.

I installed this upgrade removely via remove desktop, so when the installer
restarted the computer to begin the upgrade installation I was unable to see
if this error occured at the same place it did on the clean installation or
not, however I was able to reconnect to this machine via remote desktop where
it notified me of a failed installation, and that it rolled back my upgrade
back to beta2 with the following message:

Problem signature:
Problem Event Name: BLUESCREEN
OS Version: 6.0.5384.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: be
BCP1: 9B5E92B8
BCP2: 402CD121
BCP3: 99DF0A98
BCP4: 0000000B
OS Version: 6_0_5384
Service Pack: 0_0
Product: 256_1


With my successful install of rc1 on a separate computer, I'm curious to
whether it is infact the media that is the problem. As posted in reply to
Todd, is there a tool I can use to compare an existing DVD disc to the
downloaded .ISO? I have checked the md5 on the .ISO and they match that of
what microsoft provided, so its working correctly.


Thanks!
Thanks!