Windows Vista Forums

Installation issues

  1. #1


    =?Utf-8?B?QnJ1amFo?= Guest

    Installation issues

    I am trying to install Vista RC1 on a systeem to dual boot Fedora Core 5.
    During the installation step 2 says select destination. I had a gB FAT32
    Partition set up, and it said it needs to be NTFS. I formatted the drive to
    such, and now it keeps telling me that windows did not detect any volume that
    match the criteria. Now I have removed the FC5 drive entirely, and it still
    gives me the error no matter how large a partition I make.

    I am running a Dell Dimension 2400
    Using an SIL680 RAID card with driver floppy
    and a maxtor 300gB HDD

      My System SpecsSystem Spec

  2.   


  3. #2


    Rick Rogers Guest

    Re: Installation issues

    Hi,

    What format is the active partition? Not the installation target, but the
    partition or volume that is designated as active. It has to be NTFS for
    Vista to install its bootloader.

    --
    Best of Luck,

    Rick Rogers, aka "Nutcase" - Microsoft MVP
    http://mvp.support.microsoft.com/
    Windows help - www.rickrogers.org

    "Brujah" <Brujah@discussions.microsoft.com> wrote in message
    news:5053F0A0-1CFD-4BD1-BE58-139ECF45EFFE@microsoft.com...
    >I am trying to install Vista RC1 on a systeem to dual boot Fedora Core 5.
    > During the installation step 2 says select destination. I had a gB FAT32
    > Partition set up, and it said it needs to be NTFS. I formatted the drive
    > to
    > such, and now it keeps telling me that windows did not detect any volume
    > that
    > match the criteria. Now I have removed the FC5 drive entirely, and it
    > still
    > gives me the error no matter how large a partition I make.
    >
    > I am running a Dell Dimension 2400
    > Using an SIL680 RAID card with driver floppy
    > and a maxtor 300gB HDD



      My System SpecsSystem Spec

  4. #3


    =?Utf-8?B?QnJ1amFo?= Guest

    Re: Installation issues

    well it wasn't listing any from yhe primary drive, however in this system's
    BIOS I found there is a Hard disk sequence option separate from the boot
    sequence, all I had to do was List this drive as primary, and it installed.

    "Rick Rogers" wrote:

    > Hi,
    >
    > What format is the active partition? Not the installation target, but the
    > partition or volume that is designated as active. It has to be NTFS for
    > Vista to install its bootloader.
    >
    > --
    > Best of Luck,
    >
    > Rick Rogers, aka "Nutcase" - Microsoft MVP
    > http://mvp.support.microsoft.com/
    > Windows help - www.rickrogers.org
    >
    > "Brujah" <Brujah@discussions.microsoft.com> wrote in message
    > news:5053F0A0-1CFD-4BD1-BE58-139ECF45EFFE@microsoft.com...
    > >I am trying to install Vista RC1 on a systeem to dual boot Fedora Core 5.
    > > During the installation step 2 says select destination. I had a gB FAT32
    > > Partition set up, and it said it needs to be NTFS. I formatted the drive
    > > to
    > > such, and now it keeps telling me that windows did not detect any volume
    > > that
    > > match the criteria. Now I have removed the FC5 drive entirely, and it
    > > still
    > > gives me the error no matter how large a partition I make.
    > >
    > > I am running a Dell Dimension 2400
    > > Using an SIL680 RAID card with driver floppy
    > > and a maxtor 300gB HDD

    >
    >


      My System SpecsSystem Spec


Installation issues

Similar Threads
Thread Forum
Installation Issues Live Mail
Installation Issues Vista installation & setup
Installation Issues Vista installation & setup
Installation Issues!! Please help Vista General
Installation issues Vista installation & setup