Vista - Cannot resume from sleep mode

i have problem after close the lid of my laptop, it goes to sleep mode and
never wake up!!!
The only way to "use" the laptop again is to press the power buttom, turn it
off and on again, terrible!!!
So, any solution to this?

Mc

"McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
>i have problem after close the lid of my laptop, it goes to sleep mode and
> never wake up!!!
> The only way to "use" the laptop again is to press the power buttom, turn
> it
> off and on again, terrible!!!
> So, any solution to this?

Does it have an nVidia video card? I had to go back to using the XP drivers
for my 5200 as the nVidia Vista ones caused the machine to hang upon waking.
Could give that a go.

You'll lose glass however.

--
Paul Smith,
Yeovil, UK.
Microsoft MVP Windows Shell/User.
http://www.windowsresource.net/

*Remove 'nospam.' to reply by e-mail*

Thanks Paul, sorry for mention my laptop's configuration, here it is:

Intel PIII-M 1.6
2G Ram
Intel 825/855 chip
60G harddisk
DVD combo drive
fujitsu tablet 4010 notebook

The laptop does resume on the very first time after vista RC1 was installed
but it never comes again....
Thanks!

Mc


"Paul Smith" wrote:

> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
> >i have problem after close the lid of my laptop, it goes to sleep mode and
> > never wake up!!!
> > The only way to "use" the laptop again is to press the power buttom, turn
> > it
> > off and on again, terrible!!!
> > So, any solution to this?
>
> Does it have an nVidia video card? I had to go back to using the XP drivers
> for my 5200 as the nVidia Vista ones caused the machine to hang upon waking.
> Could give that a go.
>
> You'll lose glass however.
>
> --
> Paul Smith,
> Yeovil, UK.
> Microsoft MVP Windows Shell/User.
> http://www.windowsresource.net/
>
> *Remove 'nospam.' to reply by e-mail*
>

I have the same problem. I have a dell e1705. Whenever I resume from
sleep, everything seems to come back but the display, and I have to use the
power button to shut it down. Then it complains that it didn't start
properly when I start it back up.

I have an ATI x1400 video card which I am using the built in vista drivers
for (ATI's drivers seemed to pop up the display settings after every log
in).

Sleep/hibernate did work for me in one of the previous builds, beta 2 I
think.

"McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
news:4170F046-B988-4716-9322-D369B17AFBC0@microsoft.com...
> Thanks Paul, sorry for mention my laptop's configuration, here it is:
>
> Intel PIII-M 1.6
> 2G Ram
> Intel 825/855 chip
> 60G harddisk
> DVD combo drive
> fujitsu tablet 4010 notebook
>
> The laptop does resume on the very first time after vista RC1 was
> installed
> but it never comes again....
> Thanks!
>
> Mc
>
>
> "Paul Smith" wrote:
>
>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
>> >i have problem after close the lid of my laptop, it goes to sleep mode
>> >and
>> > never wake up!!!
>> > The only way to "use" the laptop again is to press the power buttom,
>> > turn
>> > it
>> > off and on again, terrible!!!
>> > So, any solution to this?
>>
>> Does it have an nVidia video card? I had to go back to using the XP
>> drivers
>> for my 5200 as the nVidia Vista ones caused the machine to hang upon
>> waking.
>> Could give that a go.
>>
>> You'll lose glass however.
>>
>> --
>> Paul Smith,
>> Yeovil, UK.
>> Microsoft MVP Windows Shell/User.
>> http://www.windowsresource.net/
>>
>> *Remove 'nospam.' to reply by e-mail*
>>

I had a problem like this in earlier builds. Seat would look like it was
coming back from sleep and go into a black screen. What I would do, and I'm
not suggesting it will work for you, but you can give it a shot if you like,
was hit Ctrl-Alt-Del which would bring up the Windows Security screen from
which I could properly shut down the box. I know that doesn't fix your
problem, but if it works it'll save you from having to hit the Big Red
Button to restart the box.

Lang

"Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
news:0F06642A-7A44-47AA-ABAB-39A499449CCF@microsoft.com...
>I have the same problem. I have a dell e1705. Whenever I resume from
>sleep, everything seems to come back but the display, and I have to use the
>power button to shut it down. Then it complains that it didn't start
>properly when I start it back up.
>
> I have an ATI x1400 video card which I am using the built in vista drivers
> for (ATI's drivers seemed to pop up the display settings after every log
> in).
>
> Sleep/hibernate did work for me in one of the previous builds, beta 2 I
> think.
>
> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
> news:4170F046-B988-4716-9322-D369B17AFBC0@microsoft.com...
>> Thanks Paul, sorry for mention my laptop's configuration, here it is:
>>
>> Intel PIII-M 1.6
>> 2G Ram
>> Intel 825/855 chip
>> 60G harddisk
>> DVD combo drive
>> fujitsu tablet 4010 notebook
>>
>> The laptop does resume on the very first time after vista RC1 was
>> installed
>> but it never comes again....
>> Thanks!
>>
>> Mc
>>
>>
>> "Paul Smith" wrote:
>>
>>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>>> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
>>> >i have problem after close the lid of my laptop, it goes to sleep mode
>>> >and
>>> > never wake up!!!
>>> > The only way to "use" the laptop again is to press the power buttom,
>>> > turn
>>> > it
>>> > off and on again, terrible!!!
>>> > So, any solution to this?
>>>
>>> Does it have an nVidia video card? I had to go back to using the XP
>>> drivers
>>> for my 5200 as the nVidia Vista ones caused the machine to hang upon
>>> waking.
>>> Could give that a go.
>>>
>>> You'll lose glass however.
>>>
>>> --
>>> Paul Smith,
>>> Yeovil, UK.
>>> Microsoft MVP Windows Shell/User.
>>> http://www.windowsresource.net/
>>>
>>> *Remove 'nospam.' to reply by e-mail*
>>>
>

Yeah, I tried that, didn't work. My work around right now is just to
disable sleep in my power plan.
"Lang Murphy" <lang_murphy@hotmail.com> wrote in message
news:36630D6F-2C1E-42DD-97FF-266055690EDA@microsoft.com...
>I had a problem like this in earlier builds. Seat would look like it was
>coming back from sleep and go into a black screen. What I would do, and I'm
>not suggesting it will work for you, but you can give it a shot if you
>like, was hit Ctrl-Alt-Del which would bring up the Windows Security screen
>from which I could properly shut down the box. I know that doesn't fix your
>problem, but if it works it'll save you from having to hit the Big Red
>Button to restart the box.
>
> Lang
>
> "Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
> news:0F06642A-7A44-47AA-ABAB-39A499449CCF@microsoft.com...
>>I have the same problem. I have a dell e1705. Whenever I resume from
>>sleep, everything seems to come back but the display, and I have to use
>>the power button to shut it down. Then it complains that it didn't start
>>properly when I start it back up.
>>
>> I have an ATI x1400 video card which I am using the built in vista
>> drivers for (ATI's drivers seemed to pop up the display settings after
>> every log in).
>>
>> Sleep/hibernate did work for me in one of the previous builds, beta 2 I
>> think.
>>
>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>> news:4170F046-B988-4716-9322-D369B17AFBC0@microsoft.com...
>>> Thanks Paul, sorry for mention my laptop's configuration, here it is:
>>>
>>> Intel PIII-M 1.6
>>> 2G Ram
>>> Intel 825/855 chip
>>> 60G harddisk
>>> DVD combo drive
>>> fujitsu tablet 4010 notebook
>>>
>>> The laptop does resume on the very first time after vista RC1 was
>>> installed
>>> but it never comes again....
>>> Thanks!
>>>
>>> Mc
>>>
>>>
>>> "Paul Smith" wrote:
>>>
>>>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>>>> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
>>>> >i have problem after close the lid of my laptop, it goes to sleep mode
>>>> >and
>>>> > never wake up!!!
>>>> > The only way to "use" the laptop again is to press the power buttom,
>>>> > turn
>>>> > it
>>>> > off and on again, terrible!!!
>>>> > So, any solution to this?
>>>>
>>>> Does it have an nVidia video card? I had to go back to using the XP
>>>> drivers
>>>> for my 5200 as the nVidia Vista ones caused the machine to hang upon
>>>> waking.
>>>> Could give that a go.
>>>>
>>>> You'll lose glass however.
>>>>
>>>> --
>>>> Paul Smith,
>>>> Yeovil, UK.
>>>> Microsoft MVP Windows Shell/User.
>>>> http://www.windowsresource.net/
>>>>
>>>> *Remove 'nospam.' to reply by e-mail*
>>>>
>>
>

Well... sorry 'bout that... I tried...

Lang

"Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
news:5FD59866-2E2C-4AF4-8DBE-B30E153783FB@microsoft.com...
> Yeah, I tried that, didn't work. My work around right now is just to
> disable sleep in my power plan.
> "Lang Murphy" <lang_murphy@hotmail.com> wrote in message
> news:36630D6F-2C1E-42DD-97FF-266055690EDA@microsoft.com...
>>I had a problem like this in earlier builds. Seat would look like it was
>>coming back from sleep and go into a black screen. What I would do, and
>>I'm not suggesting it will work for you, but you can give it a shot if you
>>like, was hit Ctrl-Alt-Del which would bring up the Windows Security
>>screen from which I could properly shut down the box. I know that doesn't
>>fix your problem, but if it works it'll save you from having to hit the
>>Big Red Button to restart the box.
>>
>> Lang
>>
>> "Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
>> news:0F06642A-7A44-47AA-ABAB-39A499449CCF@microsoft.com...
>>>I have the same problem. I have a dell e1705. Whenever I resume from
>>>sleep, everything seems to come back but the display, and I have to use
>>>the power button to shut it down. Then it complains that it didn't start
>>>properly when I start it back up.
>>>
>>> I have an ATI x1400 video card which I am using the built in vista
>>> drivers for (ATI's drivers seemed to pop up the display settings after
>>> every log in).
>>>
>>> Sleep/hibernate did work for me in one of the previous builds, beta 2 I
>>> think.
>>>
>>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>>> news:4170F046-B988-4716-9322-D369B17AFBC0@microsoft.com...
>>>> Thanks Paul, sorry for mention my laptop's configuration, here it is:
>>>>
>>>> Intel PIII-M 1.6
>>>> 2G Ram
>>>> Intel 825/855 chip
>>>> 60G harddisk
>>>> DVD combo drive
>>>> fujitsu tablet 4010 notebook
>>>>
>>>> The laptop does resume on the very first time after vista RC1 was
>>>> installed
>>>> but it never comes again....
>>>> Thanks!
>>>>
>>>> Mc
>>>>
>>>>
>>>> "Paul Smith" wrote:
>>>>
>>>>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
>>>>> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
>>>>> >i have problem after close the lid of my laptop, it goes to sleep
>>>>> >mode and
>>>>> > never wake up!!!
>>>>> > The only way to "use" the laptop again is to press the power buttom,
>>>>> > turn
>>>>> > it
>>>>> > off and on again, terrible!!!
>>>>> > So, any solution to this?
>>>>>
>>>>> Does it have an nVidia video card? I had to go back to using the XP
>>>>> drivers
>>>>> for my 5200 as the nVidia Vista ones caused the machine to hang upon
>>>>> waking.
>>>>> Could give that a go.
>>>>>
>>>>> You'll lose glass however.
>>>>>
>>>>> --
>>>>> Paul Smith,
>>>>> Yeovil, UK.
>>>>> Microsoft MVP Windows Shell/User.
>>>>> http://www.windowsresource.net/
>>>>>
>>>>> *Remove 'nospam.' to reply by e-mail*
>>>>>
>>>
>>
>

i have tried before but still not work. the laptop keep sleeping...

Mc

"Lang Murphy" wrote:

> Well... sorry 'bout that... I tried...
>
> Lang
>
> "Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
> news:5FD59866-2E2C-4AF4-8DBE-B30E153783FB@microsoft.com...
> > Yeah, I tried that, didn't work. My work around right now is just to
> > disable sleep in my power plan.
> > "Lang Murphy" <lang_murphy@hotmail.com> wrote in message
> > news:36630D6F-2C1E-42DD-97FF-266055690EDA@microsoft.com...
> >>I had a problem like this in earlier builds. Seat would look like it was
> >>coming back from sleep and go into a black screen. What I would do, and
> >>I'm not suggesting it will work for you, but you can give it a shot if you
> >>like, was hit Ctrl-Alt-Del which would bring up the Windows Security
> >>screen from which I could properly shut down the box. I know that doesn't
> >>fix your problem, but if it works it'll save you from having to hit the
> >>Big Red Button to restart the box.
> >>
> >> Lang
> >>
> >> "Dave Phillips" <crisponions@discussions.microsoft.com> wrote in message
> >> news:0F06642A-7A44-47AA-ABAB-39A499449CCF@microsoft.com...
> >>>I have the same problem. I have a dell e1705. Whenever I resume from
> >>>sleep, everything seems to come back but the display, and I have to use
> >>>the power button to shut it down. Then it complains that it didn't start
> >>>properly when I start it back up.
> >>>
> >>> I have an ATI x1400 video card which I am using the built in vista
> >>> drivers for (ATI's drivers seemed to pop up the display settings after
> >>> every log in).
> >>>
> >>> Sleep/hibernate did work for me in one of the previous builds, beta 2 I
> >>> think.
> >>>
> >>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
> >>> news:4170F046-B988-4716-9322-D369B17AFBC0@microsoft.com...
> >>>> Thanks Paul, sorry for mention my laptop's configuration, here it is:
> >>>>
> >>>> Intel PIII-M 1.6
> >>>> 2G Ram
> >>>> Intel 825/855 chip
> >>>> 60G harddisk
> >>>> DVD combo drive
> >>>> fujitsu tablet 4010 notebook
> >>>>
> >>>> The laptop does resume on the very first time after vista RC1 was
> >>>> installed
> >>>> but it never comes again....
> >>>> Thanks!
> >>>>
> >>>> Mc
> >>>>
> >>>>
> >>>> "Paul Smith" wrote:
> >>>>
> >>>>> "McStayCool" <McStayCool@discussions.microsoft.com> wrote in message
> >>>>> news:96CAF454-293D-4287-BBCA-F2FC90FCE9FF@microsoft.com...
> >>>>> >i have problem after close the lid of my laptop, it goes to sleep
> >>>>> >mode and
> >>>>> > never wake up!!!
> >>>>> > The only way to "use" the laptop again is to press the power buttom,
> >>>>> > turn
> >>>>> > it
> >>>>> > off and on again, terrible!!!
> >>>>> > So, any solution to this?
> >>>>>
> >>>>> Does it have an nVidia video card? I had to go back to using the XP
> >>>>> drivers
> >>>>> for my 5200 as the nVidia Vista ones caused the machine to hang upon
> >>>>> waking.
> >>>>> Could give that a go.
> >>>>>
> >>>>> You'll lose glass however.
> >>>>>
> >>>>> --
> >>>>> Paul Smith,
> >>>>> Yeovil, UK.
> >>>>> Microsoft MVP Windows Shell/User.
> >>>>> http://www.windowsresource.net/
> >>>>>
> >>>>> *Remove 'nospam.' to reply by e-mail*
> >>>>>
> >>>
> >>
> >
>
>

"McStayCool" wrote:

> i have problem after close the lid of my laptop, it goes to sleep mode and
> never wake up!!!
> The only way to "use" the laptop again is to press the power buttom, turn it
> off and on again, terrible!!!
> So, any solution to this?
>
> Mc
I've got the same problem, but fortunately I found the solution for that
(the sounds were ok, but screen was black, like something is happening in the
background). You should try to press the button to adjust brightness on your
display increase/decrese it helped me.

The solution is to try adjust your brightness level increase/decrease by
pressing the special button on the keyboard, it helped me.