Windows Vista Forums

Vista blue screens/restart

  1. #1



    Newbie
    Join Date : May 2009
    Posts : 2
    home premium
    Local Time: 03:32 PM

    Vista blue screens/restart

    Hey guys I'm new to this forum and was hoping you guys could help me out.
    I just bought an emachines computer, an ET1161-07 to be exact.

    Integrated nvidia 6150 gfx
    nvidia 9400 gt
    vista home premium
    amd anthlon x2 4050e processor
    3 gigs of ram

    Now I've had this for, i kid you not, less than a day, and blue screens of death/restarts keep occuring.
    I have norton 360 running and updated, updated my graphics driver for my 9400, updated everything I could through windows update, and still this problem presists.

    Sometimes, the blue screen will just briefly flash, then restart and it gives me the option of choosing if i want to go into safe mode or not.
    Also, i changed some setting on my internet connection, through cmd.exe, i changed everything this video told me to
    http://www.youtube.com/watch?v=k6Xmv6HpjnE
    When i attempted to go back and reverse it, it said that elevation was required and the command failed on ipv4.

    The blue screens have varied in what they say, they always dump my physical memory so i never get a chance to fully read them.
    However, they have said all of the following.
    MEMORY MANAGEMENT
    Something about a bad page file
    And a few more i cant remember

    Right now, my pc runs fine for a while, but most of the time when i boot it up, it says rundll32 has encountered a problem and must close. Sometimes this forces a blue screen to appear sometimes it doesn't.

    I also thought it may have been heat, but i was runnining my computer fine for 15 hours straight or so when i got it and it was ok, but then showed a blue screen of death for memory management.
    Currently, it runs in this strange windows 98 style, the icons, toolbar, start menu, everything is windows 98 looking. Also, it displays a rundll32 error and somestimes a windows process error everytime i start up.
    I ran a memory diagnostic and it said there were no problems.


    Any help here guys?

    Last edited by frickfrock99; 05 May 2009 at 04:57 PM.
      My System SpecsSystem Spec

  2.   


  3. #2


    Steve McGarrett Guest

    Re: Vista blue screens/restart

    On Tue, 5 May 2009 16:36:33 -0500, frickfrock99
    <guest@xxxxxx-email.com> wrote:

    >Hey guys I'm new to this forum and was hoping you guys could help me
    >out.
    >I just bought an emachines computer, an ET1161-07 to be exact.
    >
    >Integrated nvidia 6150 gfx
    >nvidia 9400 gt
    >vista home premium
    >amd anthlon x2 4050e processor
    >3 gigs of ram
    >
    >Now I've had this for, i kid you not, less than a day, and blue screens
    >of death/restarts keep occuring.
    [snip]

    Use the recovery utility (disk or hidden partition) to return it to
    out-of-the-box condition.

    Do NOT install a bunch of stuff. Just go online and take a look
    around.

    If no blue screens, then something you installed is causing your
    problem. IF you get blue screens, take the computer back.

      My System SpecsSystem Spec

  4. #3


    GTS Guest

    Re: Vista blue screens/restart

    Do you really want to start troubleshooting a 1 day old machine? You
    should promptly contact the seller.
    --

    "frickfrock99" <guest@xxxxxx-email.com> wrote in message
    news:6c009df8ae691f003e592e534831a99f@xxxxxx-gateway.com...

    >
    > Hey guys I'm new to this forum and was hoping you guys could help me
    > out.
    > I just bought an emachines computer, an ET1161-07 to be exact.
    >
    > Integrated nvidia 6150 gfx
    > nvidia 9400 gt
    > vista home premium
    > amd anthlon x2 4050e processor
    > 3 gigs of ram
    >
    > Now I've had this for, i kid you not, less than a day, and blue screens
    > of death/restarts keep occuring.
    > I have norton 360 running and updated, updated my graphics driver for
    > my 9400, updated everything I could through windows update, and still
    > this problem presists.
    >
    > Sometimes, the blue screen will just briefly flash, then restart and it
    > gives me the option of choosing if i want to go into safe mode or not.
    > Also, i changed some setting on my internet connection, through
    > cmd.exe, i changed everything this video told me to
    > '_http://www.youtube.com/watch?v=k6Xmv6HpjnE_'
    > (http://www.youtube.com/watch?v=k6Xmv6HpjnE)
    > When i attempted to go back and reverse it, it said that elevation was
    > required and the command failed on ipv4.
    >
    > The blue screens have varied in what they say, they always dump my
    > physical memory so i never get a chance to fully read them.
    > However, they have said all of the following.
    > MEMORY MANAGEMENT
    > Something about a bad page file
    > And a few more i cant remember
    >
    > Right now, my pc runs fine for a while, but most of the time when i
    > boot it up, it says rundll32 has encountered a problem and must close.
    > Sometimes this forces a blue screen to appear sometimes it doesn't.
    >
    > I also thought it may have been heat, but i was runnining my computer
    > fine for 15 hours straight or so when i got it and it was ok, but then
    > showed a blue screen of death for memory management.
    > Currently, it runs in this strange windows 98 style, the icons,
    > toolbar, start menu, everything is windows 98 looking. Also, it displays
    > a rundll32 error and somestimes a windows process error everytime i
    > start up.
    > I ran a memory diagnostic and it said there were no problems.
    >
    >
    > Any help here guys?
    >
    >
    > --
    > frickfrock99

      My System SpecsSystem Spec

  5. #4


    Chad Harris Guest

    Re: Vista blue screens/restart



    "frickfrock99" <guest@xxxxxx-email.com> wrote in message
    news:6c009df8ae691f003e592e534831a99f@xxxxxx-gateway.com...

    >
    > Hey guys I'm new to this forum and was hoping you guys could help me
    > out.
    > I just bought an emachines computer, an ET1161-07 to be exact.
    >
    > Integrated nvidia 6150 gfx
    > nvidia 9400 gt
    > vista home premium
    > amd anthlon x2 4050e processor
    > 3 gigs of ram
    >
    > Now I've had this for, i kid you not, less than a day, and blue screens
    > of death/restarts keep occuring.
    > I have norton 360 running and updated, updated my graphics driver for
    > my 9400, updated everything I could through windows update, and still
    > this problem presists.
    >
    > Sometimes, the blue screen will just briefly flash, then restart and it
    > gives me the option of choosing if i want to go into safe mode or not.
    > Also, i changed some setting on my internet connection, through
    > cmd.exe, i changed everything this video told me to
    > '_http://www.youtube.com/watch?v=k6Xmv6HpjnE_'
    > (http://www.youtube.com/watch?v=k6Xmv6HpjnE)
    > When i attempted to go back and reverse it, it said that elevation was
    > required and the command failed on ipv4.
    >
    > The blue screens have varied in what they say, they always dump my
    > physical memory so i never get a chance to fully read them.
    > However, they have said all of the following.
    > MEMORY MANAGEMENT
    > Something about a bad page file
    > And a few more i cant remember
    >
    > Right now, my pc runs fine for a while, but most of the time when i
    > boot it up, it says rundll32 has encountered a problem and must close.
    > Sometimes this forces a blue screen to appear sometimes it doesn't.
    >
    > I also thought it may have been heat, but i was runnining my computer
    > fine for 15 hours straight or so when i got it and it was ok, but then
    > showed a blue screen of death for memory management.
    > Currently, it runs in this strange windows 98 style, the icons,
    > toolbar, start menu, everything is windows 98 looking. Also, it displays
    > a rundll32 error and somestimes a windows process error everytime i
    > start up.
    > I ran a memory diagnostic and it said there were no problems.
    >
    >
    > Any help here guys?

    Hi Frickfrock99--

    You can easily see what the BSOD stop error is by setting for it to freeze
    on screen before restart.

    http://www.howtogeek.com/howto/windo...omatic-reboot/


    I'd try these steps in this order, whatever the BSOD says, provided you've
    checked to make sure your hardware is not the cause of the problems. Make
    sure inside your box all connections are tight, and your video and sound
    cards and memory are seated correctly.

    If you don't have a Vista DVD from MSFT (I'm not talking about an OEM
    recovery DVD or partition which will put you at default if it works with
    nothing saved):

    Download Vista Repair Disk
    http://neosmart.net/blog/2008/window...disc-download/

    1) First try 3 options from Startup Repair. If you have a Vista DVD then
    restart with it in the drive>press any key to boot from it and run Startup
    Repair. From Startup Repair you have 3 good tools with an excellent chance
    of fixing your system. If you don't have a Vista DVD from which to boot to
    Startup Repair, no problem, Download the .iso from the link below and
    burn it, and you'll have the Microsoft Vista Repair Disk with Startup
    Repair.

    Download Vista Repair Disk
    http://neosmart.net/blog/2008/window...disc-download/

    How to Use Startup Repair from the Vista DVD or the Repair Disk you make:

    http://www.bleepingcomputer.com/tuto...torial142.html

    http://windowshelp.microsoft.com/Win...f3f351033.mspx

    2) If Startup Repair does not get your Vista back, then use the 3 bootrec
    commands from the command prompt available on the Statup Repair Menu:

    The menu I refer to is in this set of directions with a grey background.

    http://vistahomepremium.windowsreins...airstartup.htm

    Those are:

    bootrec /fixmbr
    bootrec /fixboot
    bootrec /rebuild BCD

    3) If my second option doesn't work, then try System restore from the
    Startup Repair list.

    4) If by rare chance you have an actual Vista DVD, you can put it in, boot
    from it>choose the Upgrade Option>choose your current broken Vista Drive and
    try to do a repair install with the Vista DVD.

    How To Perform a Repair Installation For Vista
    Repair Install For Vista

    5) If the above 3 tools don't work, then use the 4 tools available by
    restarting your pc and tapping F8 once per second to get to the Windows
    Advanced Options Menu.

    From this menu click on 3 Safe Mode links to use System Restore. Make sure
    you try all 3 if one doesn't work, because just one of them may work.
    Tap F8 to Reach Windows Advanced Options Menu Pictured Below:

    http://media.photobucket.com/image/v...ot-Options.jpg

    Safe Mode
    Safe Mode with Networking
    Safe Mode with Command: At the prompt you would type the command to use
    forsystem restore at the safe mode cmd prompt is:

    %systemroot%\system32\restore\rstrui.exe

    If these 3 tools don't work, you have one more you can try which is Last
    Known Good Configuration.

    Good luck,

    CH





      My System SpecsSystem Spec

  6. #5


    the wharf rat Guest

    Re: Vista blue screens/restart

    In article <6c009df8ae691f003e592e534831a99f@xxxxxx-gateway.com>,
    frickfrock99 <guest@xxxxxx-email.com> wrote:

    >
    >Now I've had this for, i kid you not, less than a day, and blue screens
    >of death/restarts keep occuring.
    Sounds like a job for...Captain Warranty! Jeez, really, it's
    brand new, call 'em up and make them fix it. Don't worry about causing
    layoffs or something at emachines, they have expense accruals just for
    things like this.

    >Something about a bad page file
    Turn off the restart on error option if you want to catch the message,
    but it sounds like a bad hard drive.


      My System SpecsSystem Spec

  7. #6



    Newbie
    Join Date : May 2009
    Posts : 2
    home premium
    Local Time: 03:32 PM


      Thread Starter

    Re: Vista blue screens/restart

    Hi Frickfrock99--

    You can easily see what the BSOD stop error is by setting for it to freeze
    on screen before restart.

    Help Troubleshoot the Blue Screen of Death by Preventing Automatic Reboot :: the How-To Geek


    I'd try these steps in this order, whatever the BSOD says, provided you've
    checked to make sure your hardware is not the cause of the problems. Make
    sure inside your box all connections are tight, and your video and sound
    cards and memory are seated correctly.

    If you don't have a Vista DVD from MSFT (I'm not talking about an OEM
    recovery DVD or partition which will put you at default if it works with
    nothing saved):

    Download Vista Repair Disk
    Windows Vista Recovery Disc Download &#x2014; The NeoSmart Files

    1) First try 3 options from Startup Repair. If you have a Vista DVD then
    restart with it in the drive>press any key to boot from it and run Startup
    Repair. From Startup Repair you have 3 good tools with an excellent chance
    of fixing your system. If you don't have a Vista DVD from which to boot to
    Startup Repair, no problem, Download the .iso from the link below and
    burn it, and you'll have the Microsoft Vista Repair Disk with Startup
    Repair.

    Download Vista Repair Disk
    Windows Vista Recovery Disc Download &#x2014; The NeoSmart Files

    How to Use Startup Repair from the Vista DVD or the Repair Disk you make:

    Using System Restore from the Vista Windows Recovery Environment

    Startup Repair: frequently asked questions - Windows Vista Help

    2) If Startup Repair does not get your Vista back, then use the 3 bootrec
    commands from the command prompt available on the Statup Repair Menu:

    The menu I refer to is in this set of directions with a grey background.

    Windows Vista Home Premium - Repair StartUp

    Those are:

    bootrec /fixmbr
    bootrec /fixboot
    bootrec /rebuild BCD

    3) If my second option doesn't work, then try System restore from the
    Startup Repair list.

    4) If by rare chance you have an actual Vista DVD, you can put it in, boot
    from it>choose the Upgrade Option>choose your current broken Vista Drive and
    try to do a repair install with the Vista DVD.

    How To Perform a Repair Installation For Vista
    Repair Install For Vista

    5) If the above 3 tools don't work, then use the 4 tools available by
    restarting your pc and tapping F8 once per second to get to the Windows
    Advanced Options Menu.

    From this menu click on 3 Safe Mode links to use System Restore. Make sure
    you try all 3 if one doesn't work, because just one of them may work.
    Tap F8 to Reach Windows Advanced Options Menu Pictured Below:

    Vista windows advanced options menu image by indyank on Photobucket

    Safe Mode
    Safe Mode with Networking
    Safe Mode with Command: At the prompt you would type the command to use
    forsystem restore at the safe mode cmd prompt is:

    %systemroot%\system32\restore\rstrui.exe

    If these 3 tools don't work, you have one more you can try which is Last
    Known Good Configuration.

    Good luck,

    CH[/quote]

    Ok so i made my repair disk, and put it in.
    The first thing i did was see if there were any startup problems, so i hit startup repair, and it said there were no problems.
    So i decided to go to system restore, and set it to the earliest time i could.
    I began restoring, then a BSOD appeared with a NTFS.sys error, and 0x0000008e (0xc0000005, 0x80ce752B, 0x8d973b64, 0x00000000,

    Now i cant even start my computer normally, as the startup repair window keeps popping up as it says windows cannot start, even when i hit cancel it still pops up on the restart.
    Whenever i try to just let it fix what it says, it gives me a blue screen, most recently it said
    PFN_list_corrupt

      My System SpecsSystem Spec


Vista blue screens/restart
Similar Threads
Thread Forum
Blue Screens in Vista Vista General
Vista blue screens Vista General
VISTA BLUE SCREENS OF DEATH Vista performance & maintenance
Blue screens black screens Vista installation & setup
Vista Install blue screens Vista General