Program needs older version of .net?

I have some database software that needs the .net environment to run. I had
..NET 2.0 pre-Vista. Everything ran fine.

When I as re-installing the software after installing Windows Vista, I had
this error come up:

"This setup requires the .NET framework version 1.1.4322. Please install
the .net framework and run this setup again."

I kinda thought .NET 2.0 (this is the version shipped with Vista, correct?)
just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this would
matter?

Thanks for your help.
Jesse

Hi,
Just found out myself; .NET 2.0 and 1. are two separare animals. >net
2.0 doesn't include 1. ; from what I read.

Jeff

"jknoll" <jknoll@community.nospam> wrote in message
news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>I have some database software that needs the .net environment to run. I
>had
> .NET 2.0 pre-Vista. Everything ran fine.
>
> When I as re-installing the software after installing Windows Vista, I had
> this error come up:
>
> "This setup requires the .NET framework version 1.1.4322. Please install
> the .net framework and run this setup again."
>
> I kinda thought .NET 2.0 (this is the version shipped with Vista,
> correct?)
> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this would
> matter?
>
> Thanks for your help.
> Jesse

ahh...ok- so both versions can be installed at the same time *safely* with
Vista?

"Tom Porterfield" wrote:

> jknoll wrote:
> > I have some database software that needs the .net environment to run. I
> > had .NET 2.0 pre-Vista. Everything ran fine.
> >
> > When I as re-installing the software after installing Windows Vista, I had
> > this error come up:
> >
> > "This setup requires the .NET framework version 1.1.4322. Please install
> > the .net framework and run this setup again."
> >
> > I kinda thought .NET 2.0 (this is the version shipped with Vista,
> > correct?) just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why
> > this would matter?
>
> Different versions of the framework are just that, different versions of the
> framework. One version does not upgrade another. If a program was written
> to specifically use the 1.1 version of the framework, then that is he
> version tha you need. Version 2.0 does not replace 1.1, both versions can
> be installed at the same time.
> --
> Tom Porterfield
>
>

jknoll wrote:
> ahh...ok- so both versions can be installed at the same time *safely* with
> Vista?

Yes, with Vista and any other version of Windows that the framework runs on.
--
Tom Porterfield

To work around the issue, before installing .NET Framework 1.1, remove the
read-only protection of the following regkey:

{HKLM\SOFTWARE\Classes\Interface\{65074F7F-63C0-304E-AF0A-D51741CB4A8D}\TypeLib}

To change the permission, you need to 1st take ownership of the key as an
administrator and change the permission of the key afterwards. Here

1.. Make sure you log on as a user in the Administrators group
2.. In Regedit, right click on the key and choose Permissions
3.. Click on Advanced
4.. Go to the Owner tab
5.. Select the Administrators group as the Owner and click Apply and OK
6.. In the Permissions dialog, select Full Control for the SYSTEM group
7.. Now, you can start the NETFX1.1 installation

HtH

--
Leen
==> Please only reply in the newsgroup <==
*** This means, DO NOT send me Email also!!! ***

How to burn an ISO file :
http://iso.snoekonline.com/iso.htm



"jknoll" <jknoll@community.nospam> wrote in message
news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>I have some database software that needs the .net environment to run. I
>had
> .NET 2.0 pre-Vista. Everything ran fine.
>
> When I as re-installing the software after installing Windows Vista, I had
> this error come up:
>
> "This setup requires the .NET framework version 1.1.4322. Please install
> the .net framework and run this setup again."
>
> I kinda thought .NET 2.0 (this is the version shipped with Vista,
> correct?)
> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this would
> matter?
>
> Thanks for your help.
> Jesse

..NET Framework 1.1 installed automatically for me while installing Microsoft
Student 2006.

--
Reply to Group only please.
"Leen" <ms_windows_2000@hotmail.com> wrote in message
news:OSNovQRqGHA.1140@TK2MSFTNGP05.phx.gbl...
> To work around the issue, before installing .NET Framework 1.1, remove the
> read-only protection of the following regkey:
>
> {HKLM\SOFTWARE\Classes\Interface\{65074F7F-63C0-304E-AF0A-D51741CB4A8D}\TypeLib}
>
> To change the permission, you need to 1st take ownership of the key as an
> administrator and change the permission of the key afterwards. Here
>
> 1.. Make sure you log on as a user in the Administrators group
> 2.. In Regedit, right click on the key and choose Permissions
> 3.. Click on Advanced
> 4.. Go to the Owner tab
> 5.. Select the Administrators group as the Owner and click Apply and OK
> 6.. In the Permissions dialog, select Full Control for the SYSTEM group
> 7.. Now, you can start the NETFX1.1 installation
>
> HtH
>
> --
> Leen
> ==> Please only reply in the newsgroup <==
> *** This means, DO NOT send me Email also!!! ***
>
> How to burn an ISO file :
> http://iso.snoekonline.com/iso.htm
>
>
>
> "jknoll" <jknoll@community.nospam> wrote in message
> news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>>I have some database software that needs the .net environment to run. I
>>had
>> .NET 2.0 pre-Vista. Everything ran fine.
>>
>> When I as re-installing the software after installing Windows Vista, I
>> had
>> this error come up:
>>
>> "This setup requires the .NET framework version 1.1.4322. Please install
>> the .net framework and run this setup again."
>>
>> I kinda thought .NET 2.0 (this is the version shipped with Vista,
>> correct?)
>> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this would
>> matter?
>>
>> Thanks for your help.
>> Jesse
>
>

Did you then get the service pack and security updates?

"Michael Styles" <mlstyles@bellsouth.net> wrote in message
news:27758582-89FB-4356-B120-628A2E8E297C@microsoft.com...
> .NET Framework 1.1 installed automatically for me while installing
> Microsoft Student 2006.
>
> --
> Reply to Group only please.
> "Leen" <ms_windows_2000@hotmail.com> wrote in message
> news:OSNovQRqGHA.1140@TK2MSFTNGP05.phx.gbl...
>> To work around the issue, before installing .NET Framework 1.1, remove
>> the
>> read-only protection of the following regkey:
>>
>> {HKLM\SOFTWARE\Classes\Interface\{65074F7F-63C0-304E-AF0A-D51741CB4A8D}\TypeLib}
>>
>> To change the permission, you need to 1st take ownership of the key as an
>> administrator and change the permission of the key afterwards. Here
>>
>> 1.. Make sure you log on as a user in the Administrators group
>> 2.. In Regedit, right click on the key and choose Permissions
>> 3.. Click on Advanced
>> 4.. Go to the Owner tab
>> 5.. Select the Administrators group as the Owner and click Apply and OK
>> 6.. In the Permissions dialog, select Full Control for the SYSTEM group
>> 7.. Now, you can start the NETFX1.1 installation
>>
>> HtH
>>
>> --
>> Leen
>> ==> Please only reply in the newsgroup <==
>> *** This means, DO NOT send me Email also!!! ***
>>
>> How to burn an ISO file :
>> http://iso.snoekonline.com/iso.htm
>>
>>
>>
>> "jknoll" <jknoll@community.nospam> wrote in message
>> news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>>>I have some database software that needs the .net environment to run. I
>>>had
>>> .NET 2.0 pre-Vista. Everything ran fine.
>>>
>>> When I as re-installing the software after installing Windows Vista, I
>>> had
>>> this error come up:
>>>
>>> "This setup requires the .NET framework version 1.1.4322. Please
>>> install
>>> the .net framework and run this setup again."
>>>
>>> I kinda thought .NET 2.0 (this is the version shipped with Vista,
>>> correct?)
>>> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this
>>> would
>>> matter?
>>>
>>> Thanks for your help.
>>> Jesse
>>
>>
>

Nothing through Windows Update.

--
Reply to Group only please.
"Colin Barnhorst" <colinbarharst(remove)@msn.com> wrote in message
news:egt8HoRqGHA.1796@TK2MSFTNGP03.phx.gbl...
> Did you then get the service pack and security updates?
>
> "Michael Styles" <mlstyles@bellsouth.net> wrote in message
> news:27758582-89FB-4356-B120-628A2E8E297C@microsoft.com...
>> .NET Framework 1.1 installed automatically for me while installing
>> Microsoft Student 2006.
>>
>> --
>> Reply to Group only please.
>> "Leen" <ms_windows_2000@hotmail.com> wrote in message
>> news:OSNovQRqGHA.1140@TK2MSFTNGP05.phx.gbl...
>>> To work around the issue, before installing .NET Framework 1.1, remove
>>> the
>>> read-only protection of the following regkey:
>>>
>>> {HKLM\SOFTWARE\Classes\Interface\{65074F7F-63C0-304E-AF0A-D51741CB4A8D}\TypeLib}
>>>
>>> To change the permission, you need to 1st take ownership of the key as
>>> an
>>> administrator and change the permission of the key afterwards. Here
>>>
>>> 1.. Make sure you log on as a user in the Administrators group
>>> 2.. In Regedit, right click on the key and choose Permissions
>>> 3.. Click on Advanced
>>> 4.. Go to the Owner tab
>>> 5.. Select the Administrators group as the Owner and click Apply and OK
>>> 6.. In the Permissions dialog, select Full Control for the SYSTEM group
>>> 7.. Now, you can start the NETFX1.1 installation
>>>
>>> HtH
>>>
>>> --
>>> Leen
>>> ==> Please only reply in the newsgroup <==
>>> *** This means, DO NOT send me Email also!!! ***
>>>
>>> How to burn an ISO file :
>>> http://iso.snoekonline.com/iso.htm
>>>
>>>
>>>
>>> "jknoll" <jknoll@community.nospam> wrote in message
>>> news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>>>>I have some database software that needs the .net environment to run. I
>>>>had
>>>> .NET 2.0 pre-Vista. Everything ran fine.
>>>>
>>>> When I as re-installing the software after installing Windows Vista, I
>>>> had
>>>> this error come up:
>>>>
>>>> "This setup requires the .NET framework version 1.1.4322. Please
>>>> install
>>>> the .net framework and run this setup again."
>>>>
>>>> I kinda thought .NET 2.0 (this is the version shipped with Vista,
>>>> correct?)
>>>> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this
>>>> would
>>>> matter?
>>>>
>>>> Thanks for your help.
>>>> Jesse
>>>
>>>
>>
>
>

Downloaded and installed update and SP1 OK, albeit with compatibility
warnings. Several reboots later and all appears OK. Both applets under
Administrative Tools for .NET 1.1 are functional.

--
Reply to Group only please.
"Colin Barnhorst" <colinbarharst(remove)@msn.com> wrote in message
news:egt8HoRqGHA.1796@TK2MSFTNGP03.phx.gbl...
> Did you then get the service pack and security updates?
>
> "Michael Styles" <mlstyles@bellsouth.net> wrote in message
> news:27758582-89FB-4356-B120-628A2E8E297C@microsoft.com...
>> .NET Framework 1.1 installed automatically for me while installing
>> Microsoft Student 2006.
>>
>> --
>> Reply to Group only please.
>> "Leen" <ms_windows_2000@hotmail.com> wrote in message
>> news:OSNovQRqGHA.1140@TK2MSFTNGP05.phx.gbl...
>>> To work around the issue, before installing .NET Framework 1.1, remove
>>> the
>>> read-only protection of the following regkey:
>>>
>>> {HKLM\SOFTWARE\Classes\Interface\{65074F7F-63C0-304E-AF0A-D51741CB4A8D}\TypeLib}
>>>
>>> To change the permission, you need to 1st take ownership of the key as
>>> an
>>> administrator and change the permission of the key afterwards. Here
>>>
>>> 1.. Make sure you log on as a user in the Administrators group
>>> 2.. In Regedit, right click on the key and choose Permissions
>>> 3.. Click on Advanced
>>> 4.. Go to the Owner tab
>>> 5.. Select the Administrators group as the Owner and click Apply and OK
>>> 6.. In the Permissions dialog, select Full Control for the SYSTEM group
>>> 7.. Now, you can start the NETFX1.1 installation
>>>
>>> HtH
>>>
>>> --
>>> Leen
>>> ==> Please only reply in the newsgroup <==
>>> *** This means, DO NOT send me Email also!!! ***
>>>
>>> How to burn an ISO file :
>>> http://iso.snoekonline.com/iso.htm
>>>
>>>
>>>
>>> "jknoll" <jknoll@community.nospam> wrote in message
>>> news:6189B830-A590-49A2-9BB9-66438EAF651A@microsoft.com...
>>>>I have some database software that needs the .net environment to run. I
>>>>had
>>>> .NET 2.0 pre-Vista. Everything ran fine.
>>>>
>>>> When I as re-installing the software after installing Windows Vista, I
>>>> had
>>>> this error come up:
>>>>
>>>> "This setup requires the .NET framework version 1.1.4322. Please
>>>> install
>>>> the .net framework and run this setup again."
>>>>
>>>> I kinda thought .NET 2.0 (this is the version shipped with Vista,
>>>> correct?)
>>>> just carried everything from 1.0, 1.1 and 1.1 sp1? Wonder why this
>>>> would
>>>> matter?
>>>>
>>>> Thanks for your help.
>>>> Jesse
>>>
>>>
>>
>
>