Cannot get AMD nVidia RAID 1 on RC2 x32

I have XP and RC2 dual booting on a SATA RAID 0 array with no issues. The
problem is that I also have a SATA RAID 1 array that RC2 recognizes as two
separate disks instead of an array.

I've tried a few tricks in this forum but so far no luck. Any help is
appreciated.

Specs:

Asus A8N-E with latest 1013 bios
NVIDIA RAID Class Controller verion 5.10.2600.819 (9/8/2006)

Healthy boot RAID 0 array using Microsoft driver 6.0.5744.16384 (6/21/2006)
Healthy RAID 1 array using 2 Seagates recognized as separate drives

PNuts:
I have the same mother board running RC2 with Nvidia raid 1 without
any problems. My raid array shows up as only one drive. Verify that the bios
is setup for raid on the two drives that are the raid 1 array. After a bios
update I forgot to reset the bios for the raid array and showed separate
drives and partitions.


"PNutts" <pnutterfield@hotmail.com> wrote in message
news428C3E7-9FF4-4215-A185-C15B4FA5879F@microsoft.com...
>I have XP and RC2 dual booting on a SATA RAID 0 array with no issues. The
> problem is that I also have a SATA RAID 1 array that RC2 recognizes as two
> separate disks instead of an array.
>
> I've tried a few tricks in this forum but so far no luck. Any help is
> appreciated.
>
> Specs:
>
> Asus A8N-E with latest 1013 bios
> NVIDIA RAID Class Controller verion 5.10.2600.819 (9/8/2006)
>
> Healthy boot RAID 0 array using Microsoft driver 6.0.5744.16384
> (6/21/2006)
> Healthy RAID 1 array using 2 Seagates recognized as separate drives
>

Good advice. I should have mentioned that I do have it set up in the bios and
did use F10 to build the array. It works fine in XP but I can't get Vista to
recognize it. Strange!

"Dennis Pack" wrote:

> PNuts:
> I have the same mother board running RC2 with Nvidia raid 1 without
> any problems. My raid array shows up as only one drive. Verify that the bios
> is setup for raid on the two drives that are the raid 1 array. After a bios
> update I forgot to reset the bios for the raid array and showed separate
> drives and partitions.
>
>
> "PNutts" <pnutterfield@hotmail.com> wrote in message
> news428C3E7-9FF4-4215-A185-C15B4FA5879F@microsoft.com...
> >I have XP and RC2 dual booting on a SATA RAID 0 array with no issues. The
> > problem is that I also have a SATA RAID 1 array that RC2 recognizes as two
> > separate disks instead of an array.
> >
> > I've tried a few tricks in this forum but so far no luck. Any help is
> > appreciated.
> >
> > Specs:
> >
> > Asus A8N-E with latest 1013 bios
> > NVIDIA RAID Class Controller verion 5.10.2600.819 (9/8/2006)
> >
> > Healthy boot RAID 0 array using Microsoft driver 6.0.5744.16384
> > (6/21/2006)
> > Healthy RAID 1 array using 2 Seagates recognized as separate drives
> >
>

I feel that a mature set of NVIDIA chipset drivers for Vista will be needed
to resolve this.

regards
Robert
"PNutts" <pnutterfield@hotmail.com> wrote in message
news428C3E7-9FF4-4215-A185-C15B4FA5879F@microsoft.com...
>I have XP and RC2 dual booting on a SATA RAID 0 array with no issues. The
> problem is that I also have a SATA RAID 1 array that RC2 recognizes as two
> separate disks instead of an array.
>
> I've tried a few tricks in this forum but so far no luck. Any help is
> appreciated.
>
> Specs:
>
> Asus A8N-E with latest 1013 bios
> NVIDIA RAID Class Controller verion 5.10.2600.819 (9/8/2006)
>
> Healthy boot RAID 0 array using Microsoft driver 6.0.5744.16384
> (6/21/2006)
> Healthy RAID 1 array using 2 Seagates recognized as separate drives
>