Vista - Vista Media Center Display Problems

Hey all,

I have Vista Beta 2 installed and working great on an AMD machine with
an ATI x700 PCI-e video card. It is plugged into my big screen and looks
great. The problem is when I run Media Center. The display changes to a
smaller box in the top left and freezes. It is still working, as I can hear
things move when I use the remote. It will even refresh the screen if I
alt-tab out and back in, but as soon as I go back in it is frozen again...

Any suggestions?

Thanks!

Could it be a RAM thing? Have you got anything else running, and how fast is
your computer? If you can give a spec., that'd be useful. Just when things
freeze, usually (here anyway) it's down to lack of system resources.

Check Task Manager (Ctrl+Shift+Esc) whilst you're in Media Center (when the
problem occurs) and see what your Pagefile and CPU is like )

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Trilotech" <trilotech@discussions.microsoft.com> wrote in message
news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
> Hey all,
>
> I have Vista Beta 2 installed and working great on an AMD machine with
> an ATI x700 PCI-e video card. It is plugged into my big screen and looks
> great. The problem is when I run Media Center. The display changes to a
> smaller box in the top left and freezes. It is still working, as I can
> hear things move when I use the remote. It will even refresh the screen if
> I alt-tab out and back in, but as soon as I go back in it is frozen
> again...
>
> Any suggestions?
>
> Thanks!
>

I have a Gig of RAM. The computer does not freeze, only the Media Center
window display. Everything else works. I can alt-tab out of it. Even Media
Center IS working. I can re-fresh its display by atl-tab out and back in to
see that using the remote has changed things.


"Zack Whittaker" <admin@zacknet.co.uk> wrote in message
news:eQgTWN%23hGHA.4080@TK2MSFTNGP03.phx.gbl...
> Could it be a RAM thing? Have you got anything else running, and how fast
> is your computer? If you can give a spec., that'd be useful. Just when
> things freeze, usually (here anyway) it's down to lack of system
> resources.
>
> Check Task Manager (Ctrl+Shift+Esc) whilst you're in Media Center (when
> the problem occurs) and see what your Pagefile and CPU is like )
>
> --
> Zack Whittaker
> » ZackNET Enterprises: www.zacknet.co.uk
> » MSBlog on ResDev: www.msblog.org
> » Vista Knowledge Base: www.vistabase.co.uk
> » This mailing is provided "as is" with no warranties, and confers no
> rights. All opinions expressed are those of myself unless stated so, and
> not
> of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
> that up!
>
> --: Original message follows :--
> "Trilotech" <trilotech@discussions.microsoft.com> wrote in message
> news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>> Hey all,
>>
>> I have Vista Beta 2 installed and working great on an AMD machine with
>> an ATI x700 PCI-e video card. It is plugged into my big screen and looks
>> great. The problem is when I run Media Center. The display changes to a
>> smaller box in the top left and freezes. It is still working, as I can
>> hear things move when I use the remote. It will even refresh the screen
>> if I alt-tab out and back in, but as soon as I go back in it is frozen
>> again...
>>
>> Any suggestions?
>>
>> Thanks!
>>
>
>

During setup, I was given a choice to adjust my display and use a specific
refresh rate, thats the issue I think you are experiencing.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Trilotech" <trilotech@discussions.microsoft.com> wrote in message
news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
> Hey all,
>
> I have Vista Beta 2 installed and working great on an AMD machine with
> an ATI x700 PCI-e video card. It is plugged into my big screen and looks
> great. The problem is when I run Media Center. The display changes to a
> smaller box in the top left and freezes. It is still working, as I can
> hear things move when I use the remote. It will even refresh the screen if
> I alt-tab out and back in, but as soon as I go back in it is frozen
> again...
>
> Any suggestions?
>
> Thanks!
>

I don't remember getting that option? Do you know where I can access it
after the fact?

Thanks

"Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
news:%23BZiGq%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
> During setup, I was given a choice to adjust my display and use a specific
> refresh rate, thats the issue I think you are experiencing.
> --
> --
> Andre
> Windows Connected | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "Trilotech" <trilotech@discussions.microsoft.com> wrote in message
> news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>> Hey all,
>>
>> I have Vista Beta 2 installed and working great on an AMD machine with
>> an ATI x700 PCI-e video card. It is plugged into my big screen and looks
>> great. The problem is when I run Media Center. The display changes to a
>> smaller box in the top left and freezes. It is still working, as I can
>> hear things move when I use the remote. It will even refresh the screen
>> if I alt-tab out and back in, but as soon as I go back in it is frozen
>> again...
>>
>> Any suggestions?
>>
>> Thanks!
>>
>
>

There's an option to rerun the setup process in the Options menu )

--
Zack Whittaker
» ZackNET Enterprises: www.zacknet.co.uk
» MSBlog on ResDev: www.msblog.org
» Vista Knowledge Base: www.vistabase.co.uk
» This mailing is provided "as is" with no warranties, and confers no
rights. All opinions expressed are those of myself unless stated so, and not
of my employer, best friend, Ghandi, my mother or my cat. Glad we cleared
that up!

--: Original message follows :--
"Trilotech" <trilotech@discussions.microsoft.com> wrote in message
news:OasD8E$hGHA.3904@TK2MSFTNGP02.phx.gbl...
>I don't remember getting that option? Do you know where I can access it
>after the fact?
>
> Thanks
>
> "Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
> news:%23BZiGq%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>> During setup, I was given a choice to adjust my display and use a
>> specific refresh rate, thats the issue I think you are experiencing.
>> --
>> --
>> Andre
>> Windows Connected | http://www.windowsconnected.com
>> Extended64 | http://www.extended64.com
>> Blog | http://www.extended64.com/blogs/andre
>> http://spaces.msn.com/members/adacosta
>>
>> "Trilotech" <trilotech@discussions.microsoft.com> wrote in message
>> news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>>> Hey all,
>>>
>>> I have Vista Beta 2 installed and working great on an AMD machine
>>> with an ATI x700 PCI-e video card. It is plugged into my big screen and
>>> looks great. The problem is when I run Media Center. The display changes
>>> to a smaller box in the top left and freezes. It is still working, as I
>>> can hear things move when I use the remote. It will even refresh the
>>> screen if I alt-tab out and back in, but as soon as I go back in it is
>>> frozen again...
>>>
>>> Any suggestions?
>>>
>>> Thanks!
>>>
>>
>>
>
>

You were right on the money! I had selected rear projection and let it use
the default which was 480i. Only, I had it plugged in through s-video. I
switched resolutions and that worked. Then I plugged in via HD and went back
to 480i and that worked as well.

Thanks!

"Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
news:%23BZiGq%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
> During setup, I was given a choice to adjust my display and use a specific
> refresh rate, thats the issue I think you are experiencing.
> --
> --
> Andre
> Windows Connected | http://www.windowsconnected.com
> Extended64 | http://www.extended64.com
> Blog | http://www.extended64.com/blogs/andre
> http://spaces.msn.com/members/adacosta
>
> "Trilotech" <trilotech@discussions.microsoft.com> wrote in message
> news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>> Hey all,
>>
>> I have Vista Beta 2 installed and working great on an AMD machine with
>> an ATI x700 PCI-e video card. It is plugged into my big screen and looks
>> great. The problem is when I run Media Center. The display changes to a
>> smaller box in the top left and freezes. It is still working, as I can
>> hear things move when I use the remote. It will even refresh the screen
>> if I alt-tab out and back in, but as soon as I go back in it is frozen
>> again...
>>
>> Any suggestions?
>>
>> Thanks!
>>
>
>

You are welcome Trilotech.
--
--
Andre
Windows Connected | http://www.windowsconnected.com
Extended64 | http://www.extended64.com
Blog | http://www.extended64.com/blogs/andre
http://spaces.msn.com/members/adacosta

"Trilotech" <trilotech@discussions.microsoft.com> wrote in message
news:%238F4BhAiGHA.3588@TK2MSFTNGP02.phx.gbl...
> You were right on the money! I had selected rear projection and let it use
> the default which was 480i. Only, I had it plugged in through s-video. I
> switched resolutions and that worked. Then I plugged in via HD and went
> back to 480i and that worked as well.
>
> Thanks!
>
> "Andre Da Costa [Extended64]" <andred25@hotmail.com> wrote in message
> news:%23BZiGq%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>> During setup, I was given a choice to adjust my display and use a
>> specific refresh rate, thats the issue I think you are experiencing.
>> --
>> --
>> Andre
>> Windows Connected | http://www.windowsconnected.com
>> Extended64 | http://www.extended64.com
>> Blog | http://www.extended64.com/blogs/andre
>> http://spaces.msn.com/members/adacosta
>>
>> "Trilotech" <trilotech@discussions.microsoft.com> wrote in message
>> news:ush2WH%23hGHA.2456@TK2MSFTNGP04.phx.gbl...
>>> Hey all,
>>>
>>> I have Vista Beta 2 installed and working great on an AMD machine
>>> with an ATI x700 PCI-e video card. It is plugged into my big screen and
>>> looks great. The problem is when I run Media Center. The display changes
>>> to a smaller box in the top left and freezes. It is still working, as I
>>> can hear things move when I use the remote. It will even refresh the
>>> screen if I alt-tab out and back in, but as soon as I go back in it is
>>> frozen again...
>>>
>>> Any suggestions?
>>>
>>> Thanks!
>>>
>>
>>
>
>