![]() |
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() |
| Welcome to Windows Vista Forums. Our forum is dedicated to helping you find solutions with any problems, errors or issues you are experiencing with Windows Vista. The Vista forum also covers news and updates and has an extensive Windows Vista tutorial section that covers a wide range of tips and tricks. |
| |||||||
![]() |
| |
| | #1 (permalink) |
| Vista Home Premium 32bit | Booting Vista From Laptop Harddrive on a Desktop? Ok, so I am building a PC for the first time and the assembly wasn't too bad. Every component is powering up and seems to be operating fine. I also installed my 2.5" Hard drive from my broken laptop that runs 32bit Vista Home Premium. So after the motherboard posts when i first started up, vista boots but is extremely sluggish. I am a real novice when it comes to this sort of stuff, but i think the problem is that the harddrive hasnt detected the new components. Aside from the processor it still shows old hardware from the laptop like memory and video card and doesnt even register the second hard drive installed. How can i get vista to recognize all the new hardware? The reason i did this is because i wanted to get around buying another copy of vista if i could. Any tips or suggestions? Thanks, Brandon Commputer Hardware: EVGA x58 Mobo Intel Core i7 920 2.66GHZ MSI Nvidia GTX275 896MB Rosewill 1000W PSU WD 640GB HD Toshiba 170GB 2.5" HD 6GB DDR3 1600 Ram |
My System Specs![]() |
| | #2 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? bm2xv <guest@xxxxxx-email.com> wrote: Quote: > >Ok, so I am building a PC for the first time and the assembly wasn't too >bad. Every component is powering up and seems to be operating fine. > >I also installed my 2.5" Hard drive from my broken laptop that runs >32bit Vista Home Premium. So after the motherboard posts when i first >started up, vista boots but is extremely sluggish. > >I am a real novice when it comes to this sort of stuff, but i think the >problem is that the harddrive hasnt detected the new components. Aside >from the processor it still shows old hardware from the laptop like >memory and video card and doesnt even register the second hard drive >installed. > >How can i get vista to recognize all the new hardware? The reason i did >this is because i wanted to get around buying another copy of vista if i >could. Any tips or suggestions? that's a long shot) one or the other will turn up as invalid when it gets activated - which will be required. |
My System Specs![]() |
| | #3 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? Here's what bm2xv wrote on 9/12/09: Quote: > Ok, so I am building a PC for the first time and the assembly wasn't too > bad. Every component is powering up and seems to be operating fine. Quote: > I also installed my 2.5" Hard drive from my broken laptop that runs > 32bit Vista Home Premium. So after the motherboard posts when i first > started up, vista boots but is extremely sluggish. Quote: > I am a real novice when it comes to this sort of stuff, but i think the > problem is that the harddrive hasnt detected the new components. Aside > from the processor it still shows old hardware from the laptop like > memory and video card and doesnt even register the second hard drive > installed. Quote: > How can i get vista to recognize all the new hardware? The reason i did > this is because i wanted to get around buying another copy of vista if i > could. Any tips or suggestions? Quote: > Thanks, > Brandon Quote: > Commputer Hardware: > EVGA x58 Mobo > Intel Core i7 920 2.66GHZ > MSI Nvidia GTX275 896MB > Rosewill 1000W PSU > WD 640GB HD > Toshiba 170GB 2.5" HD > 6GB DDR3 1600 Ram purchased DVD. If your system was preinstalled on the laptop, there are probably no drivers for Windows to use for many components of the new box on the hard drive, and what you are doing probably violates Microsoft's license. Hang around the NG and see what some others have to say on these issues, since I am not an expert. -- Gene Bloch 650.366.4267 lettersatblochg.com |
My System Specs![]() |
| | #4 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? bm2xv wrote: Quote: > > > Ok, so I am building a PC for the first time and the assembly wasn't too > bad. Every component is powering up and seems to be operating fine. > > I also installed my 2.5" Hard drive from my broken laptop that runs > 32bit Vista Home Premium. So after the motherboard posts when i first > started up, vista boots but is extremely sluggish. > > I am a real novice when it comes to this sort of stuff, but i think the > problem is that the harddrive hasnt detected the new components. Aside > from the processor it still shows old hardware from the laptop like > memory and video card and doesnt even register the second hard drive > installed. > > How can i get vista to recognize all the new hardware? The reason i did > this is because i wanted to get around buying another copy of vista if i > could. Any tips or suggestions? > But really, you need to re-install the OS. That's pretty much why OEM installs of the OS are useless. A retail copy can be installed anywhere. I would imagine you are violating the EULA ... as by any stretch of the imagination, that is a new PC. You could also try Linux...I recommend Fedora. |
My System Specs![]() |
| | #5 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? John Galt <galtj@xxxxxx> wrote: Quote: >bm2xv <guest@xxxxxx-email.com> wrote: > Quote: >> >>Ok, so I am building a PC for the first time and the assembly wasn't too >>bad. Every component is powering up and seems to be operating fine. >> >>I also installed my 2.5" Hard drive from my broken laptop that runs >>32bit Vista Home Premium. So after the motherboard posts when i first >>started up, vista boots but is extremely sluggish. >> >>I am a real novice when it comes to this sort of stuff, but i think the >>problem is that the harddrive hasnt detected the new components. Aside >>from the processor it still shows old hardware from the laptop like >>memory and video card and doesnt even register the second hard drive >>installed. >> >>How can i get vista to recognize all the new hardware? The reason i did >>this is because i wanted to get around buying another copy of vista if i >>could. Any tips or suggestions? >You have to buy another copy. Even IF you get this one working (and >that's a long shot) one or the other will turn up as invalid when it >gets activated - which will be required. IF you can get the system working, you'll be fine... but it's highly doubtful that you will be able to do so. |
My System Specs![]() |
| | #6 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? I asked MS a similar question and was told specifically that a retail (purchased) copy of the OS could be used on the new computer if the old one was being taken out of service, but that an OEM (pre-loaded) version of the OS could not -- in other words, would violate the license. "Gene E. Bloch" <letters@newsgroup> wrote in message news:uIAyATANKHA.3284@newsgroup Quote: > Here's what bm2xv wrote on 9/12/09: Quote: >> Ok, so I am building a PC for the first time and the assembly wasn't too >> bad. Every component is powering up and seems to be operating fine. Quote: >> I also installed my 2.5" Hard drive from my broken laptop that runs >> 32bit Vista Home Premium. So after the motherboard posts when i first >> started up, vista boots but is extremely sluggish. Quote: >> I am a real novice when it comes to this sort of stuff, but i think the >> problem is that the harddrive hasnt detected the new components. Aside >> from the processor it still shows old hardware from the laptop like >> memory and video card and doesnt even register the second hard drive >> installed. Quote: >> How can i get vista to recognize all the new hardware? The reason i did >> this is because i wanted to get around buying another copy of vista if i >> could. Any tips or suggestions? Quote: >> Thanks, >> Brandon > Quote: >> Commputer Hardware: >> EVGA x58 Mobo >> Intel Core i7 920 2.66GHZ >> MSI Nvidia GTX275 896MB >> Rosewill 1000W PSU >> WD 640GB HD >> Toshiba 170GB 2.5" HD >> 6GB DDR3 1600 Ram > The only solution I am aware of is to reinstall Vista from a newly > purchased DVD. If your system was preinstalled on the laptop, there are > probably no drivers for Windows to use for many components of the new box > on the hard drive, and what you are doing probably violates Microsoft's > license. > > Hang around the NG and see what some others have to say on these issues, > since I am not an expert. > > -- > Gene Bloch 650.366.4267 lettersatblochg.com > > |
My System Specs![]() |
| | #7 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? Well, are you a techy type? If so get a Microsoft Technet subscription and you will never worry about another OS again [ or copy of Office or SQL Server or ... ] - plus you get a neat magazine every month. Remember, Technet subscriptions mean that the Microsoft operating systems you download are licensed to you for your techy purposes and not tied to the machine. You aren't supposed to act as a software supply depot for the whole family or company, neither. You may not, say, use your subscription to provide your company with its software e.g. you can't download SQL Server then run the company's main database from it. The licenses are for *you* alone. But a Technet subscription is an excellent option for someone "into" Windows, and computing etc. etc. On top of it all you get stuff early. For instance, Technet subscribers can download the .ISO for Windows 7 - the RTM bits - burn them to disc and take the thing for a drive. So, I do not know how "into" computers you are, but you are building and testing your own computers so you might consider it. A Technet subscription is $300plus for a year, but the licenses are perpetual. You might also hear of an MSDN subscription. They are similar, only include developer tools as well, such as Visual Studio. Instead of the Technet magazine, you get the MSDN magazine. AFAIK they also send you DVDs with MSDN, whereas the regular Technet subscription is download only. Both offer enhanced support, including answers to your questions on these newsgroups direct from Microsoft. MSDN subscriptions are pricier: $700 - $5000. Saucy "bm2xv" <guest@newsgroup-email.com> wrote in message news:0d46118682a02e4f9ab7c8c5de70e952@newsgroup-gateway.com... Quote: > > Ok, so I am building a PC for the first time and the assembly wasn't too > bad. Every component is powering up and seems to be operating fine. > > I also installed my 2.5" Hard drive from my broken laptop that runs > 32bit Vista Home Premium. So after the motherboard posts when i first > started up, vista boots but is extremely sluggish. > > I am a real novice when it comes to this sort of stuff, but i think the > problem is that the harddrive hasnt detected the new components. Aside > from the processor it still shows old hardware from the laptop like > memory and video card and doesnt even register the second hard drive > installed. > > How can i get vista to recognize all the new hardware? The reason i did > this is because i wanted to get around buying another copy of vista if i > could. Any tips or suggestions? > > Thanks, > Brandon > > > Commputer Hardware: > EVGA x58 Mobo > Intel Core i7 920 2.66GHZ > MSI Nvidia GTX275 896MB > Rosewill 1000W PSU > WD 640GB HD > Toshiba 170GB 2.5" HD > 6GB DDR3 1600 Ram > > > -- > bm2xv |
My System Specs![]() |
| | #8 (permalink) |
| | Re: Booting Vista From Laptop Harddrive on a Desktop? On 9/13/09, the entity rak wrote this: Quote: > I asked MS a similar question and was told specifically that a retail > (purchased) copy of the OS could be used on the new computer if the old one > was being taken out of service, but that an OEM (pre-loaded) version of the > OS could not -- in other words, would violate the license. Quote: > "Gene E. Bloch" <letters@newsgroup> wrote in message > news:uIAyATANKHA.3284@newsgroup Quote: >> Here's what bm2xv wrote on 9/12/09: Quote: >>> Ok, so I am building a PC for the first time and the assembly wasn't too >>> bad. Every component is powering up and seems to be operating fine. Quote: >>> I also installed my 2.5" Hard drive from my broken laptop that runs >>> 32bit Vista Home Premium. So after the motherboard posts when i first >>> started up, vista boots but is extremely sluggish. Quote: >>> I am a real novice when it comes to this sort of stuff, but i think the >>> problem is that the harddrive hasnt detected the new components. Aside >>> from the processor it still shows old hardware from the laptop like >>> memory and video card and doesnt even register the second hard drive >>> installed. Quote: >>> How can i get vista to recognize all the new hardware? The reason i did >>> this is because i wanted to get around buying another copy of vista if i >>> could. Any tips or suggestions? Quote: >>> Thanks, >>> Brandon >> Quote: >>> Commputer Hardware: >>> EVGA x58 Mobo >>> Intel Core i7 920 2.66GHZ >>> MSI Nvidia GTX275 896MB >>> Rosewill 1000W PSU >>> WD 640GB HD >>> Toshiba 170GB 2.5" HD >>> 6GB DDR3 1600 Ram >> The only solution I am aware of is to reinstall Vista from a newly >> purchased DVD. If your system was preinstalled on the laptop, there are >> probably no drivers for Windows to use for many components of the new box >> on the hard drive, and what you are doing probably violates Microsoft's >> license. >> >> Hang around the NG and see what some others have to say on these issues, >> since I am not an expert. >> >> -- Gene Bloch 650.366.4267 lettersatblochg.com >> >> Gene Bloch 650.366.4267 lettersatblochg.com |
My System Specs![]() |
![]() |
| Thread Tools | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Boost laptop harddrive speed in Vista | Vista performance & maintenance | |||
| Vista laptop, XP desktop, folder sharing from laptop to desktop | Vista networking & sharing | |||
| booting vista cloned harddrive | Vista installation & setup | |||
| cloning laptop sata harddrive vista premium | Vista hardware & devices | |||
| Booting Vista from an external drive with a laptop | Vista installation & setup | |||