Vista - Computer will not BOOT even in SAFEMODE.

It does not give me that option.
I have install WinXPpro on a partion drive.
Now do you know how I can copy all of my documents in windows vista?
I dont know how to go there and copy that. I just need that MY DOCUMENTS
folder in windows vista to be copy to windows xp.

--
Computer Tech


"John Barnes" wrote:

>
> Did you ever try F8 at startup and see if last known good will show or work.
>
> "John Barnes" <jbarnes@email.net> wrote in message
> news:e6Ev5%23iEHHA.4208@TK2MSFTNGP03.phx.gbl...
> > Sorry Edgar,you don't say whether you removed the offending file as well,
> > but to replace the crcdisk.sys file the safest way I know of would be with
> > a REPAIR install. Since Vista install is different from prior versions
> > you can no longer just go to the install disk and extract the file. Maybe
> > Colin or Jane can offer a cleaner way to recover the file. I haven't used
> > the repair tools of Vista, so I don't know if there is a way to extract a
> > file or run a tool like System File Checker from the install disk. Just
> > make sure you do a repair and NOT a full install so you don't lose any of
> > your files.
> >
> > "Edgar" <edgar_cabrera@msn.com> wrote in message
> > news:32EFB001-201C-4EBD-8212-39D6EEC15BD6@microsoft.com...
> >>I deleted the crcdisk.sys file. Now do I need it? I dont know how to
> >> UNDELETE it.
> >> Thank You.
> >>
> >> After deleting the crc file, still did the same thing. The computer
> >> starts
> >> but it stays all in black and I can see on the bottom right corner that
> >> says:
> >> WINDOWS VISTA (TM) RC1 EVALUATION COPY. BUILD 5600 and the Mouse.
> >> But
> >> that is it.
> >> Thank You.
> >> --
> >> Computer Tech
> >>
> >>
> >> "John Barnes" wrote:
> >>
> >>> Edgar, I failed to look back to the post from Craig and thought you
> >>> named
> >>> was the same file. The file you need to delete ssrtln.sys in the same
> >>> location.
> >>> Follow my previous instructions on format and delete the ssrtln.sys in
> >>> the
> >>> same location
> >>>
> >>> "Edgar" <edgar_cabrera@msn.com> wrote in message
> >>> news:990B3861-288B-43F9-86BB-5BF29B44A3DE@microsoft.com...
> >>> > This is where the computer STOPS for a while when loading the SAFE
> >>> > MODE
> >>> > files.
> >>> >
> >>> > it reads like this:
> >>> >
> >>> > \windows\system32\drivers\crcdisk.sys
> >>> >
> >>> > Now how can I DELETE this file or rename it?
> >>> >
> >>> > I do have a bootable win98 disk. Will this one work? And if it does,
> >>> > I
> >>> > dont know how to delete or rename anything in DOS mode. Can someone
> >>> > show
> >>> > me
> >>> > how? The only think i have done with that floppy is to get to the A:\
> >>> > Thank
> >>> > You.
> >>> >
> >>> > --
> >>> > Computer Tech
> >>> >
> >>> >
> >>> > "Craig" wrote:
> >>> >
> >>> >> Hello,
> >>> >> I had the same problem when I installed RecordNow ver.7 on my Sony
> >>> >> laptop.
> >>> >> My problem was caused by a .sys file. The name of my problem file was
> >>> >> the
> >>> >> ssrtln.sys file located in the C:\Windows\System32 file folder. I
> >>> >> just
> >>> >> renamed the file and rebooted and uninstalled RecordNow.....you don't
> >>> >> really
> >>> >> need it in Vista. There is also supposed to be a fix for this on
> >>> >> RecordNow's
> >>> >> website but I never could find it.
> >>> >> You will have to be able to boot off of a boot disk if you can't get
> >>> >> to
> >>> >> safe
> >>> >> mode screen. I used a Windows XP boot disk (floppy) and went to the
> >>> >> system32
> >>> >> folder and renamed the file....you could delete it also.
> >>> >> Good luck,
> >>> >> Craig
> >>> >>
> >>> >>
> >>> >> "Edgar" <edgar_cabrera@msn.com> wrote in message
> >>> >> news:8CBA9BE8-FD09-4170-9EC8-03220F29A491@microsoft.com...
> >>> >> > Hi All.
> >>> >> > My Windows vista will not BOOT even in SAFE MODE. I install
> >>> >> > RecordNow
> >>> >> > and
> >>> >> > when I rebooted the computer it stop working. I click on the Safe
> >>> >> > Mode,
> >>> >> > Safe
> >>> >> > Mode with Networking, safe mode command prompt and when the
> >>> >> > computer
> >>> >> > starts,
> >>> >> > It only says on all the 4 sides SAFE MODE but the screen is dark.
> >>> >> > I
> >>> >> > can
> >>> >> > use
> >>> >> > the mouse but I dont see anything else. Does anybody know how I
> >>> >> > can
> >>> >> > uninstall that software? Thank You.
> >>> >> > --
> >>> >> > Computer Tech
> >>> >>
> >>>
> >>>
> >
>
>

Can you not see the Vista partition in my computer?
With regards to the copy, Vista uses a file called USER and no longer uses
the Documents and Settings as a normal folder. If you see the Vista open
the USER folder and select all or choose the items you want on XP and drag
and drop them onto the folder you want them in on XP.

"Edgar" <edgar_cabrera@msn.com> wrote in message
news:CA935A05-4452-4F78-902F-2D01AE63B775@microsoft.com...
> It does not give me that option.
> I have install WinXPpro on a partion drive.
> Now do you know how I can copy all of my documents in windows vista?
> I dont know how to go there and copy that. I just need that MY DOCUMENTS
> folder in windows vista to be copy to windows xp.
>
> --
> Computer Tech
>
>
> "John Barnes" wrote:
>
>>
>> Did you ever try F8 at startup and see if last known good will show or
>> work.
>>
>> "John Barnes" <jbarnes@email.net> wrote in message
>> news:e6Ev5%23iEHHA.4208@TK2MSFTNGP03.phx.gbl...
>> > Sorry Edgar,you don't say whether you removed the offending file as
>> > well,
>> > but to replace the crcdisk.sys file the safest way I know of would be
>> > with
>> > a REPAIR install. Since Vista install is different from prior versions
>> > you can no longer just go to the install disk and extract the file.
>> > Maybe
>> > Colin or Jane can offer a cleaner way to recover the file. I haven't
>> > used
>> > the repair tools of Vista, so I don't know if there is a way to extract
>> > a
>> > file or run a tool like System File Checker from the install disk.
>> > Just
>> > make sure you do a repair and NOT a full install so you don't lose any
>> > of
>> > your files.
>> >
>> > "Edgar" <edgar_cabrera@msn.com> wrote in message
>> > news:32EFB001-201C-4EBD-8212-39D6EEC15BD6@microsoft.com...
>> >>I deleted the crcdisk.sys file. Now do I need it? I dont know how to
>> >> UNDELETE it.
>> >> Thank You.
>> >>
>> >> After deleting the crc file, still did the same thing. The computer
>> >> starts
>> >> but it stays all in black and I can see on the bottom right corner
>> >> that
>> >> says:
>> >> WINDOWS VISTA (TM) RC1 EVALUATION COPY. BUILD 5600 and the Mouse.
>> >> But
>> >> that is it.
>> >> Thank You.
>> >> --
>> >> Computer Tech
>> >>
>> >>
>> >> "John Barnes" wrote:
>> >>
>> >>> Edgar, I failed to look back to the post from Craig and thought you
>> >>> named
>> >>> was the same file. The file you need to delete ssrtln.sys in the
>> >>> same
>> >>> location.
>> >>> Follow my previous instructions on format and delete the ssrtln.sys
>> >>> in
>> >>> the
>> >>> same location
>> >>>
>> >>> "Edgar" <edgar_cabrera@msn.com> wrote in message
>> >>> news:990B3861-288B-43F9-86BB-5BF29B44A3DE@microsoft.com...
>> >>> > This is where the computer STOPS for a while when loading the SAFE
>> >>> > MODE
>> >>> > files.
>> >>> >
>> >>> > it reads like this:
>> >>> >
>> >>> > \windows\system32\drivers\crcdisk.sys
>> >>> >
>> >>> > Now how can I DELETE this file or rename it?
>> >>> >
>> >>> > I do have a bootable win98 disk. Will this one work? And if it
>> >>> > does,
>> >>> > I
>> >>> > dont know how to delete or rename anything in DOS mode. Can
>> >>> > someone
>> >>> > show
>> >>> > me
>> >>> > how? The only think i have done with that floppy is to get to the
>> >>> > A:\
>> >>> > Thank
>> >>> > You.
>> >>> >
>> >>> > --
>> >>> > Computer Tech
>> >>> >
>> >>> >
>> >>> > "Craig" wrote:
>> >>> >
>> >>> >> Hello,
>> >>> >> I had the same problem when I installed RecordNow ver.7 on my Sony
>> >>> >> laptop.
>> >>> >> My problem was caused by a .sys file. The name of my problem file
>> >>> >> was
>> >>> >> the
>> >>> >> ssrtln.sys file located in the C:\Windows\System32 file folder. I
>> >>> >> just
>> >>> >> renamed the file and rebooted and uninstalled RecordNow.....you
>> >>> >> don't
>> >>> >> really
>> >>> >> need it in Vista. There is also supposed to be a fix for this on
>> >>> >> RecordNow's
>> >>> >> website but I never could find it.
>> >>> >> You will have to be able to boot off of a boot disk if you can't
>> >>> >> get
>> >>> >> to
>> >>> >> safe
>> >>> >> mode screen. I used a Windows XP boot disk (floppy) and went to
>> >>> >> the
>> >>> >> system32
>> >>> >> folder and renamed the file....you could delete it also.
>> >>> >> Good luck,
>> >>> >> Craig
>> >>> >>
>> >>> >>
>> >>> >> "Edgar" <edgar_cabrera@msn.com> wrote in message
>> >>> >> news:8CBA9BE8-FD09-4170-9EC8-03220F29A491@microsoft.com...
>> >>> >> > Hi All.
>> >>> >> > My Windows vista will not BOOT even in SAFE MODE. I install
>> >>> >> > RecordNow
>> >>> >> > and
>> >>> >> > when I rebooted the computer it stop working. I click on the
>> >>> >> > Safe
>> >>> >> > Mode,
>> >>> >> > Safe
>> >>> >> > Mode with Networking, safe mode command prompt and when the
>> >>> >> > computer
>> >>> >> > starts,
>> >>> >> > It only says on all the 4 sides SAFE MODE but the screen is
>> >>> >> > dark.
>> >>> >> > I
>> >>> >> > can
>> >>> >> > use
>> >>> >> > the mouse but I dont see anything else. Does anybody know how I
>> >>> >> > can
>> >>> >> > uninstall that software? Thank You.
>> >>> >> > --
>> >>> >> > Computer Tech
>> >>> >>
>> >>>
>> >>>
>> >
>>
>>