Windows Vista Forums

tiptsf.dll is either not designed to run on Windows...

  1. #1


    mohh Guest

    tiptsf.dll is either not designed to run on Windows...

    Hello,

    I just purchased a new notebook and have ran into a couple of problems.
    While using notepad.exe I get the following error whenever I try to save a
    file:

    C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll is either not
    designed to run on Windows or it contains an error. Try installing the
    program again using the original installation media or contact your system
    administrator or the software vendor for support.

    I have ran into another dll error with almost the same verbage while
    clicking on the button at the lower left of the log-in screen. I refrain from
    posting that one for now though since I think that it might be related to
    this one.

    This is on a factory installed Windows Home Premium installation. All that I
    have is a system restore DVD btw. Any assistance is appreciated.

      My System SpecsSystem Spec

  2.   


  3. #2


    Rick Rogers Guest

    Re: tiptsf.dll is either not designed to run on Windows...

    Hi mohh,

    Try uninstalling the ink files. Go to the Control Panel/Programs and
    Features, click the line to turn windows features on or off. Uncheck the
    Tablet PC box, then apply/ok your way out. Reboot, then reinstall those
    components. See if this helps. If it does not, as the system is brand new,
    you need to contact the manufacturer as you may have a faulty installation
    or a hardware (most likely hard drive or memory) problem.

    --
    Best of Luck,

    Rick Rogers, aka "Nutcase" - Microsoft MVP
    http://mvp.support.microsoft.com/
    Windows help - www.rickrogers.org

    "mohh" <mohh@discussions.microsoft.com> wrote in message
    news:0A80E3A0-A1DA-49BC-9BC4-B550597762A0@microsoft.com...
    > Hello,
    >
    > I just purchased a new notebook and have ran into a couple of problems.
    > While using notepad.exe I get the following error whenever I try to save a
    > file:
    >
    > C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll is either
    > not
    > designed to run on Windows or it contains an error. Try installing the
    > program again using the original installation media or contact your system
    > administrator or the software vendor for support.
    >
    > I have ran into another dll error with almost the same verbage while
    > clicking on the button at the lower left of the log-in screen. I refrain
    > from
    > posting that one for now though since I think that it might be related to
    > this one.
    >
    > This is on a factory installed Windows Home Premium installation. All that
    > I
    > have is a system restore DVD btw. Any assistance is appreciated.



      My System SpecsSystem Spec

  4. #3


    mohh Guest

    Re: tiptsf.dll is either not designed to run on Windows...

    Thanks Rick,

    I'll give that a try. I do own an Intuos 2 tablet, but I haven't installed
    the drivers for it yet. Should I install them before or after reinstalling
    the Windows TabletPC ones? Or does it not matter? Is this feature needed for
    machines without a tablet? Sorry for all of the questions, this my first
    experience with this OS.

    "Rick Rogers" wrote:

    > Hi mohh,
    >
    > Try uninstalling the ink files. Go to the Control Panel/Programs and
    > Features, click the line to turn windows features on or off. Uncheck the
    > Tablet PC box, then apply/ok your way out. Reboot, then reinstall those
    > components. See if this helps. If it does not, as the system is brand new,
    > you need to contact the manufacturer as you may have a faulty installation
    > or a hardware (most likely hard drive or memory) problem.
    >
    > --
    > Best of Luck,
    >
    > Rick Rogers, aka "Nutcase" - Microsoft MVP
    > http://mvp.support.microsoft.com/
    > Windows help - www.rickrogers.org
    >
    > "mohh" <mohh@discussions.microsoft.com> wrote in message
    > news:0A80E3A0-A1DA-49BC-9BC4-B550597762A0@microsoft.com...
    > > Hello,
    > >
    > > I just purchased a new notebook and have ran into a couple of problems.
    > > While using notepad.exe I get the following error whenever I try to save a
    > > file:
    > >
    > > C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll is either
    > > not
    > > designed to run on Windows or it contains an error. Try installing the
    > > program again using the original installation media or contact your system
    > > administrator or the software vendor for support.
    > >
    > > I have ran into another dll error with almost the same verbage while
    > > clicking on the button at the lower left of the log-in screen. I refrain
    > > from
    > > posting that one for now though since I think that it might be related to
    > > this one.
    > >
    > > This is on a factory installed Windows Home Premium installation. All that
    > > I
    > > have is a system restore DVD btw. Any assistance is appreciated.

    >
    >


      My System SpecsSystem Spec

  5. #4


    Rick Rogers Guest

    Re: tiptsf.dll is either not designed to run on Windows...

    Hi mohh,

    It's not really essential, but does add to functionality (things like the
    snipping tool are part of the package).

    --
    Best of Luck,

    Rick Rogers, aka "Nutcase" - Microsoft MVP
    http://mvp.support.microsoft.com/
    Windows help - www.rickrogers.org

    "mohh" <mohh@discussions.microsoft.com> wrote in message
    news:29D398E7-E2EE-436F-BC66-ECDF4BC1062D@microsoft.com...
    > Thanks Rick,
    >
    > I'll give that a try. I do own an Intuos 2 tablet, but I haven't installed
    > the drivers for it yet. Should I install them before or after reinstalling
    > the Windows TabletPC ones? Or does it not matter? Is this feature needed
    > for
    > machines without a tablet? Sorry for all of the questions, this my first
    > experience with this OS.
    >
    > "Rick Rogers" wrote:
    >
    >> Hi mohh,
    >>
    >> Try uninstalling the ink files. Go to the Control Panel/Programs and
    >> Features, click the line to turn windows features on or off. Uncheck the
    >> Tablet PC box, then apply/ok your way out. Reboot, then reinstall those
    >> components. See if this helps. If it does not, as the system is brand
    >> new,
    >> you need to contact the manufacturer as you may have a faulty
    >> installation
    >> or a hardware (most likely hard drive or memory) problem.
    >>
    >> --
    >> Best of Luck,
    >>
    >> Rick Rogers, aka "Nutcase" - Microsoft MVP
    >> http://mvp.support.microsoft.com/
    >> Windows help - www.rickrogers.org
    >>
    >> "mohh" <mohh@discussions.microsoft.com> wrote in message
    >> news:0A80E3A0-A1DA-49BC-9BC4-B550597762A0@microsoft.com...
    >> > Hello,
    >> >
    >> > I just purchased a new notebook and have ran into a couple of problems.
    >> > While using notepad.exe I get the following error whenever I try to
    >> > save a
    >> > file:
    >> >
    >> > C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll is either
    >> > not
    >> > designed to run on Windows or it contains an error. Try installing the
    >> > program again using the original installation media or contact your
    >> > system
    >> > administrator or the software vendor for support.
    >> >
    >> > I have ran into another dll error with almost the same verbage while
    >> > clicking on the button at the lower left of the log-in screen. I
    >> > refrain
    >> > from
    >> > posting that one for now though since I think that it might be related
    >> > to
    >> > this one.
    >> >
    >> > This is on a factory installed Windows Home Premium installation. All
    >> > that
    >> > I
    >> > have is a system restore DVD btw. Any assistance is appreciated.

    >>
    >>



      My System SpecsSystem Spec

  6. #5


    mohh Guest

    Re: tiptsf.dll is either not designed to run on Windows...

    Thanks!

    "Rick Rogers" wrote:

    > Hi mohh,
    >
    > It's not really essential, but does add to functionality (things like the
    > snipping tool are part of the package).
    >
    > --
    > Best of Luck,
    >
    > Rick Rogers, aka "Nutcase" - Microsoft MVP
    > http://mvp.support.microsoft.com/
    > Windows help - www.rickrogers.org
    >
    > "mohh" <mohh@discussions.microsoft.com> wrote in message
    > news:29D398E7-E2EE-436F-BC66-ECDF4BC1062D@microsoft.com...
    > > Thanks Rick,
    > >
    > > I'll give that a try. I do own an Intuos 2 tablet, but I haven't installed
    > > the drivers for it yet. Should I install them before or after reinstalling
    > > the Windows TabletPC ones? Or does it not matter? Is this feature needed
    > > for
    > > machines without a tablet? Sorry for all of the questions, this my first
    > > experience with this OS.
    > >
    > > "Rick Rogers" wrote:
    > >
    > >> Hi mohh,
    > >>
    > >> Try uninstalling the ink files. Go to the Control Panel/Programs and
    > >> Features, click the line to turn windows features on or off. Uncheck the
    > >> Tablet PC box, then apply/ok your way out. Reboot, then reinstall those
    > >> components. See if this helps. If it does not, as the system is brand
    > >> new,
    > >> you need to contact the manufacturer as you may have a faulty
    > >> installation
    > >> or a hardware (most likely hard drive or memory) problem.
    > >>
    > >> --
    > >> Best of Luck,
    > >>
    > >> Rick Rogers, aka "Nutcase" - Microsoft MVP
    > >> http://mvp.support.microsoft.com/
    > >> Windows help - www.rickrogers.org
    > >>
    > >> "mohh" <mohh@discussions.microsoft.com> wrote in message
    > >> news:0A80E3A0-A1DA-49BC-9BC4-B550597762A0@microsoft.com...
    > >> > Hello,
    > >> >
    > >> > I just purchased a new notebook and have ran into a couple of problems.
    > >> > While using notepad.exe I get the following error whenever I try to
    > >> > save a
    > >> > file:
    > >> >
    > >> > C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll is either
    > >> > not
    > >> > designed to run on Windows or it contains an error. Try installing the
    > >> > program again using the original installation media or contact your
    > >> > system
    > >> > administrator or the software vendor for support.
    > >> >
    > >> > I have ran into another dll error with almost the same verbage while
    > >> > clicking on the button at the lower left of the log-in screen. I
    > >> > refrain
    > >> > from
    > >> > posting that one for now though since I think that it might be related
    > >> > to
    > >> > this one.
    > >> >
    > >> > This is on a factory installed Windows Home Premium installation. All
    > >> > that
    > >> > I
    > >> > have is a system restore DVD btw. Any assistance is appreciated.
    > >>
    > >>

    >
    >


      My System SpecsSystem Spec


tiptsf.dll is either not designed to run on Windows...
Similar Threads
Thread Forum
How we really designed the look and feel of Windows 7 Vista News
C:\\Windows\system32\dssenh.dll is either not designed to run.... Vista General
sfc_os.dll is either not designed to run with windows or...???! Vista General
Installing Softwares designed for Windows XP Vista installation & setup
ODBC32.DLL Not designed to run on Windows? after a Vista BSD Vista General